Skip to content
This repository has been archived by the owner on Feb 24, 2023. It is now read-only.
/ fennel.js Public archive

Fennel.js is a proof of concept CardDAV / CalDAV server written in JavaScript.

License

Notifications You must be signed in to change notification settings

LordEidi/fennel.js

Repository files navigation

Fennel.js

Fennel.js

Fennel.js (c) 2014-17 by SwordLord - the coding crew

Introduction

Fennel.js is a proof of concept CardDAV / CalDAV server written in JavaScript. It runs within a Node.js instance.

Important

Fennel.js started as a proof of concept to check the technical possibilities of Node.js and JavaScript as well as to validate the complexity of writing your own CalDAV and CardDAV server.

When starting with Fennel.js, we quickly noticed a few challenges with the chosen technology. One of which is getting a lightweight, hassle free installation. This is the main reason that we from SwordLord - the coding crew decided to slow down development on the *Fennel.js port and focus our efforts on the new Go based Fennel version instead.

This project is not actively maintained anymore. Have a look at Fennel instead.

What is Fennel.js

If you are looking for a lightweight CalDAV / CardDAV server, Fennel.js might be for you:

  • authentication is meant to be pluggable. While we concentrate on CourierAuth and .htaccess, you can add whatever can check a username and password.
  • the data storage backend is meant to be pluggable as well. While we start with SQLite3, we do use an ORM. Whatever database can be used with Sequelize can be used as storage backend for Fennel.js. You just have to change the settings accordingly.
  • instead of inventing the wheel, we prefer to use some of those fine node.js based libraries.
  • and after all, Fennel.js is OSS and is written in JavaScript. Whatever you do not like, you are free to replace / rewrite. Just respect the licence and give back.

Status

Fennel.js is beta software and should be handled as such:

  • The development on this project slowed down. We are now concentrating on the Go port of Fennel.
  • The CalDAV part is mostly done and now ready for a first public beta.
  • The CardDAV part is running and now ready for a first public beta as well.

Fennel.js is tested on Calendar on iOS > v7.0 and on OSX Calendar as well as with Mozilla Lightning. If you run Fennel.js with another client your mileage may vary.

What's missing:

  • different clients (we will somewhen test with other clients, but we did not do thoroughly yet)
  • Test cases for everything. We would love to have test cases for as many scenarios and features as possible. It is a pain in the neck to test Fennel.js otherwise.
  • While Fennel.js's goal is to have an RBAC based authorisation system, Fennel.js does currently only know global permissions without groups.

Installation

First of all, you need a Node.js installation.

nodejs on Debian

Make sure that you have this line in your /etc/apt/sources.list file:

deb http://YOURMIRROR.debian.org/debian jessie main

and then run:

sudo apt-get install nodejs nodejs-legacy npm
// eventually the next line as well
// sudo ln -s /usr/lib/nodejs/ /usr/lib/node

nodejs on OSX with homebrew

brew install node
brew install npm

Installation of Fennel.js

If you want to run Fennel.js under a specific user (node), do this:

sudo adduser node
su node
cd
mkdir fennel
cd fennel

Go into the directory where you want to run your copy of Fennel.js and get the latest and greatest:

cd /home/node/fennel
git clone https://github.com/LordEidi/fennel.js.git

And then with the magic of npm get the required libraries

npm install

If everything worked according to plan, you should now have a new installation of the latest Fennel.js.

Use supervisord to run Fennel.js as a service

Now we want to make sure that Fennel.js runs forever. First install the required software:

sudo apt-get install supervisor

Then copy the file utilities/fennel_supervisor.conf into your local supervisor configuration directory. This is usually done like this:

cp utilities/fennel_supervisor.conf /etc/supervisor/conf.d/fennel.conf 

Make sure you change the configuration to your local setup.

How to set up transport security

Since Fennel.js does not bring it's own crypto, you may need to install a TLS server in front of Fennel.js. You can do so with nginx, which is a lightweight http server and proxy.

First prepare your /etc/apt/sources.list file (or just install the standard Debian package, your choice):

deb http://nginx.org/packages/debian/ jessie nginx
deb-src http://nginx.org/packages/debian/ jessie nginx

Update apt-cache and install nginx to your system.

sudo update
sudo apt-get install nginx

Now configure a proxy configuration so that your instance of nginx will serve / prox the content of / for the Fennel.js server. To do so, you will need a configuration along this example:

server {
    listen   443;
    server_name  carl.yourdomain.tld;

    access_log  /var/www/logs/fennel_access.log combined;
    error_log  /var/www/logs/fennel_error.log;

    root /var/www/pages/;
    index  index.html index.htm;

    error_page   500 502 503 504  /50x.html;
    location = /50x.html {
        root   /var/www/nginx-default;
    }

    location / {
        proxy_pass         http://127.0.0.1:8888;
        proxy_redirect     off;
        proxy_set_header   Host             $host;
        proxy_set_header   X-Real-IP        $remote_addr;
        proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
        proxy_buffering    off;
    }

    ssl  on;
    ssl_certificate  /etc/nginx/certs/yourdomain.tld.pem;
    ssl_certificate_key  /etc/nginx/certs/yourdomain.tld.pem;
    ssl_session_timeout  5m;

    # modern configuration. tweak to your needs.
    ssl_protocols TLSv1.1 TLSv1.2;
    ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK';
    ssl_prefer_server_ciphers on;

    # HSTS (ngx_http_headers_module is required) (15768000 seconds = 6 months)
    add_header Strict-Transport-Security max-age=15768000;
}

Please check this site for updates on what TLS settings currently make sense:

https://mozilla.github.io/server-side-tls/ssl-config-generator

Now run or reset your nginx and start your instance of Fennel.js.

Thats it, your instance of Fennel.js should run now. All logs are sent to stdout for now. Have a look at /libs/log.js if you want to change the options.

Configuration

All parameters which can be configured right now are in the file config.js. There are not much parameters yet, indeed. But Fennel.js is not ready production anyway. And you are welcome to help out in adding parameters and configuration options.

Authentication - auth_method

The authentication method to use to authenticate users. Supported methods so far:

  • Courier: use a local courier authdaemon socket. You will need to fill in this config option as well: auth_method_courier_socket
  • htaccess: use an htaccess file to authenticate the users. You will need to fill in this option as well: auth_method_htaccess_file
  • LDAP: use an ldap server to authenticate users. You will need to fill in the options auth_method_ldap_url and auth_method_ldap_user_base_dn and make sure to have ldapjs@1.0.0 installed.

Authorisation

Fennel.js's authorisation strategy is based on the npm module shiro-trie. Permissions are written in an Apache Shiro-like style.

Permission is given on an URL and http method basis. Which means permissions can be given on a specific URL and method or with a wildcard character on multiple URLs and methods.

When defining your own permissions, make sure to change the URL syntax to the shiro syntax. Which means that /my/url/ becomes my:url. See the standard configuration for details.

While Fennel.js's goal is to have an RBAC based authorisation system, Fennel.js does currently only know global permissions without groups. See also Contribution.

How to run

Point your CalDAV and CardDAV client to the root of Fennel.js. All the rest should be managed by Fennel.js via ./well-known URLs and the chat between your client and Fennel.js.

Test cases

There are a few test cases to check the working of Fennel.js. Make sure to

  • check your configuration, especially the test user and password.
  • run an instance of Fennel.js.
  • run: npm test

You can find the test cases in the test directory. All cases are made to be run against your (local) copy of Fennel.js.

Contribution

If you happen to know how to write JavaScript, documentation or can help out with something else, drop us a note at contact at swordlord dot com. As more helping hands we have, as quicker this server gets up and feature complete.

If some feature is missing, just remember that this is an Open Source Project. If you need something, think about contributing it yourself...

Dependencies

For now, have a look at the package.json file.

If you:

  • run the test cases, make sure that you installed the dev dependencies...
  • use the LDAP authentication method, make sure to install ldapjs@1.0.0 node module with "npm install ldapjs@1.0.0".

License

Fennel.js is published under the GNU Affero General Public Licence version 3. See the LICENCE file for details.

About

Fennel.js is a proof of concept CardDAV / CalDAV server written in JavaScript.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published