Skip to content

Latest commit

 

History

History
79 lines (55 loc) · 2.48 KB

README.md

File metadata and controls

79 lines (55 loc) · 2.48 KB

port-map-operator

A LoadBalancer Service type implementation for small home clusters.

Maps the ports from your router to a Kubernetes cluster node via the Port Control Protocol.

It does not perform real load balancing of any kind, but just takes care of the port forwarding so traffic can reach the cluster node. Kubernetes still does its internal service-level load balancing.

Requirements

  • Kubernetes cluster that can run Pods with hostNetwork: true
  • Router that supports PCP for port mapping
  • No other controllers implementing LoadBalancer Service type running in the cluster (to avoid conflicts)

Deployment

See the config dir.

Use the config/default as a Kustomization base, don't forget to update the image to a non-rolling docker tag (using rolling tags like latest, nightly or master is not recommended).

If you have issues with PCP server autodiscovery, you can specify the address manually. A typical value would be the address of your router with port 5351 (standard PCP server port), or 5350. To configure the address, add the argument in the form of --pcp-server=192.168.1.1:5351 to the container command.

Usage

After the operator is installed, just create a Service with type: LoadBalancer, and the operator will map the port and fill in the externalIP.

This is how it should look like:

$ kubectl get svc
NAME         TYPE           CLUSTER-IP     EXTERNAL-IP     PORT(S)          AGE
podinfo      LoadBalancer   10.98.1.2      1.2.3.4         1234:31234/TCP   1h

The port map should also be visible in your router UI, for instance at the OpenWRT it can be found on the UPnP page.

If everything works, you (or anyone on the internet) should be able to reach the service via the IP and the port of the service. In the example above - the service will be available at 1.2.3.4:1234.

Caveats

Mapping ports lower than 1024

When trying to map ports in the range 0-1024, you may find that the mapping does not work. This is a security measure taken by the PCP servers to prevent abuse. You should be able to tune your PCP server (router) to allow port maps in the 0-1024 for your Kubernetes nodes if you really want to. See the documentation on your PCP server / router for more info.

Development

Testing

hack/intestenv.sh go test ./...

Updating dependencies

./go-vendor-update.sh

or just merge what dependabot proposes.