We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
我在使用stm32cubeMX配置基于stm32f103c8t6的点灯程序, 根据网上的教程配置之后, 生成了MDK-ARM 的keil5文件, 在点灯时我用了rt-thead的延时函数, 正常编译下载 显示一条龙都没错, 但是 ,我使用相同的方法配置好生成makefile 工程后, 程序编译和下载都是显示没错的, 但是板子的灯并没有呼吸, 亮灭变化, 同一个工程我切换成hal库的延时函数时, 板子就能有呼吸效果了. 我查了一圈, 似乎没有找到正确的方案, 请求帮助!
The text was updated successfully, but these errors were encountered:
No branches or pull requests
我在使用stm32cubeMX配置基于stm32f103c8t6的点灯程序, 根据网上的教程配置之后, 生成了MDK-ARM 的keil5文件, 在点灯时我用了rt-thead的延时函数, 正常编译下载 显示一条龙都没错,
但是 ,我使用相同的方法配置好生成makefile 工程后, 程序编译和下载都是显示没错的, 但是板子的灯并没有呼吸, 亮灭变化, 同一个工程我切换成hal库的延时函数时, 板子就能有呼吸效果了. 我查了一圈, 似乎没有找到正确的方案, 请求帮助!
The text was updated successfully, but these errors were encountered: