Dell Precision 3541 - Compatible

[3mil3]

`[OK] The IOMMU kernel parameters are set.
[OK] VT-X / AMD-V virtualization is enabled in the UEFI.
[OK] VT-D / IOMMU is enabled in the UEFI.
[Success] GPU with ID '01:00.0' could be passed through to a virtual machine!
[Success] GPU with ID '00:02.0' could be passed through to a virtual machine!
[Success] There are 2 GPU(s) in this system that could be passed through to a VM!

Is Compatible? Name IOMMU_GROUP PCI Address
Yes GP107GLM [Quadro P620] 1 pci@0000:01:00.0
Yes CoffeeLake-H GT2 [UHD Graphics 630] 2 pci@0000:00:02.0

[OK] You have GPUs that are not in the same IOMMU group. At least one of these could be passed through to a VM and at least one of the remaining ones could be used for the host system.
[Info] This system is probably MUX-less. (The connection between the GPU(s) and the [internal display]/[display outputs] is not multiplexed.)
If you found a notebook that appears to be GPU passthrough compatible, please open an issue on Github and let me know.
You may now proceed and run './mbpt.sh configure' if you haven't already.
`

[NovaPixell]

`[OK] The IOMMU kernel parameters are set. [OK] VT-X / AMD-V virtualization is enabled in the UEFI. [OK] VT-D / IOMMU is enabled in the UEFI. [Success] GPU with ID '01:00.0' could be passed through to a virtual machine! [Success] GPU with ID '00:02.0' could be passed through to a virtual machine! [Success] There are 2 GPU(s) in this system that could be passed through to a VM!

Is Compatible? Name IOMMU_GROUP PCI Address Yes GP107GLM [Quadro P620] 1 pci@0000:01:00.0 Yes CoffeeLake-H GT2 [UHD Graphics 630] 2 pci@0000:00:02.0

[OK] You have GPUs that are not in the same IOMMU group. At least one of these could be passed through to a VM and at least one of the remaining ones could be used for the host system. [Info] This system is probably MUX-less. (The connection between the GPU(s) and the [internal display]/[display outputs] is not multiplexed.) If you found a notebook that appears to be GPU passthrough compatible, please open an issue on Github and let me know. You may now proceed and run './mbpt.sh configure' if you haven't already. `

What OS did you used?