Skip to content

Latest commit

 

History

History
156 lines (117 loc) · 6.71 KB

README.md

File metadata and controls

156 lines (117 loc) · 6.71 KB

Fletchgen: The Fletcher Design Generator

Fletchgen is a command-line utility that generates the upper layers of a hardware design, including simulation and platform-specific top-levels, based on Arrow Schemas and Recordbatches.

What does Fletchgen generate?

  • For each Arrow Field, an ArrayReader/Writer is instantiated.
  • For each Arrow Schema, a RecordBatchReader/Writer is generated and wrapper around all ArrayR/W instances.
  • For all Arrow Schemas, a Kernel template is generated.
  • The Kernel is wrapped in a Nucleus that hides low-level control flow to RecordBatchR/W's and instantiates the MMIO component that handles AXI4-lite memory-mapped input/output.
  • All RecordBatchR/W's and the Nucleus is wrapped by a Mantle. The Mantle also instantiate the required memory bus interconnection logic.

This can also be shown schematically as follows: Fletchgen output, schematically

What does Fletchgen NOT generate?

Fletchgen does not generate the kernel itself.

What top-levels does Fletcher generate?

It currently supports only two top-level platforms.

  • One platform is a simulation top-level that uses a memory model that can be filled with RecordBatches.
    • To enable this top-level, use the --sim flag.
  • The other is an AXI top-level that has an AXI4 (full) master port and AXI4-lite slave port.
    • To enable this top-level, use the --axi flag.

Prerequisites

Build & install

Fletchgen is under heavy development, so for now we'd recommend to make a debug build using CMake as follows:

git clone https://github.com/abs-tudelft/fletcher.git --recursive
cd fletcher/codegen/cpp/fletchgen
mkdir debug
cd debug
cmake ..
make
sudo make install

Usage

  • Read the command-line options.
fletchgen -h

An example how to use Fletchgen can be found here.

A very gentle tutorial / introduction to Fletcher including how to use Fletchgen and how to generate input files for Fletchgen can be found here.

Supported/required metadata for Arrow Schemas

Fletchgen derives how to use an Arrow Schema from attached key-value metadata that is stored in Arrow Schemas. You can use this to, for example, prevent the generation of hardware structures for fields that you're not going to use in your kernel implementation.

Schema metadata:

Key Possible values Default Description
fletcher_name any string none The name of the schema. This is required for the schema to be identifiable after hardware generation.
fletcher_mode read / write read Determines whether a RecordBatch of this schema will be read or written by the kernel.
fletcher_bus_spec aw,dw,lw,bs,bm 64,512,8,1,16 Key to set the bus specification of the RecordBatchReader/Writer resulting from this schema. aw: address width, dw: data width, lw: burst length width, bs: minimum burst size, bm: maximum burst size.

Field metadata:

Key Possible values Default Description
fletcher_ignore true / false false If set to true, ignore a specific schema field, preventing generation of hardware to read/write from/to it.
fletcher_epc 1 / 2 / 4 / ... 1 Number of elements per cycle for this field. For List<X> fields where X is a fixed-width type, this applies to the values stream.
fletcher_lepc 1 / 2 / 4 / ... 1 For List<primitive> fields only. Number of elements per cycle on the length stream.
fletcher_profile true / false false If set to true, mark this field for profiling. The hardware streams resulting from this field will have a profiler attached to them.
fletcher_tag_width 1 / 2 / 3 / ... 1 Width of the tag field of commands and unlock streams of RecordBatchReaders/Writers. Can be used to identify commands.

Custom MMIO registers

You can add custom MMIO registers to your kernel using --reg. More information can be found here.

Custom external I/O

Sometimes, your kernel requires other I/O signals than just Arrow data streams in and out, and MMIO registers. There may be some other type of data source or sink in your design, there may be some platform-specific things you want to use, or etcetera.

You can supply Fletchgen with a YAML file describing what signals you want to draw between the kernel and the top-level. An example is shown below, where we want to handshake completion from the platform top-level with a req and ack bit.

- record:
  name: platform
  fields:
    - record:
      name: complete
      fields:
        - field:
          name: req
          width: 1
        - field:
          name: ack
          width: 1
          reverse: true

This will result in the following signals appearing at the top-level:

ext_platform_complete_req : out std_logic;
ext_platform_complete_ack : in  std_logic
  • The signals are assumed to be driven by the kernel. To drive them from the top level, use:
reverse: true
  • Fields with a width of 1 can be forced to be std_logic_vector instead of std_logic by using:
vector: true

Further reading

You can generate a simulation top level and provide a Flatbuffer file with a RecordBatch to the simulation environment. You can use this to debug your designs in simulation, independent of an FPGA platform specific simulation environment. An example is shown here..