Replies: 2 comments 1 reply
-
Hi @vvas1lev, Have you looked to see if there are any errors in the received packets?
|
Beta Was this translation helpful? Give feedback.
0 replies
-
Yes, I have, and there's nothing with regards to the NX-OS hosts. I see these only: akvorado_inlet_core_flows_errors_total{error="SNMP cache miss",exporter="Y.Y.Y.Y"} 24 but Y.Y.Y.Y is an IOS-XE host. Everything works as expected for IOS-XE. |
Beta Was this translation helpful? Give feedback.
1 reply
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hi all,
I've got a few NX-OS devices (configuration below), which don't show up in the UI. Akvorado is working perfectly fine for devices running IOS-XE, so the issue is limited to NX-OS.
=============================================
flow exporter AkvoradoExporter
destination X.X.X.X use-vrf X
transport udp 2055
source Vlan235
version 9
template data timeout 20
flow record AkvoradoRecord
match ipv4 source address
match ipv4 destination address
match ip protocol
match ip tos
match transport source-port
match transport destination-port
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last
collect ip version
sampler 1-out-of-1024
mode 1 out-of 1024
flow monitor AkvoradoMonitor
record AkvoradoRecord
exporter AkvoradoExporter
interface Vlan235
ip flow monitor AkvoradoMonitor input sampler 1-out-of-1024
Akvorado is receiving netflow packets:
curl -s https://akvorado/api/v0/inlet/metrics | grep '^akvorado_inlet_flow_input_udp_packets' | grep 235.2
akvorado_inlet_flow_input_udp_packets_total{exporter="X.X.X.X",listener=":2055",worker="1"} 11597
Beta Was this translation helpful? Give feedback.
All reactions