Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

webMAN not ready #1014

Open
hydrohs opened this issue Jan 30, 2024 · 10 comments
Open

webMAN not ready #1014

hydrohs opened this issue Jan 30, 2024 · 10 comments

Comments

@hydrohs
Copy link

hydrohs commented Jan 30, 2024

I cannot get webMAN to start. I have reinstalled multiple times, as well as (manually, following directions on the wiki) uninstalled several times to no avail. Had the issue with Rebug 4.84 as well as currently Evilnat 4.90. Any time I try to perform any action I get the message "webMAN not ready", anything that opens in the built-in browser is just a blank page, error 8071053d.

Networking is enabled and I can access the PS3 over the Cobra FTP server, as well as access sites on the internet from the PS3.

@aldostools
Copy link
Owner

aldostools commented Jan 31, 2024

Please confirm that Cobra is enabled and that /dev_hdd0/boot_plugins.txt exists and that it has the correct path of the plugin.

If you enter to recovery menu, boot_plugins.txt is deleted.

If you switched to DEX mode, the plugin should be loaded using /dev_hdd0/boot_plugins_dex.txt

The message that you get usually occurs when the plugin was not loaded

@hydrohs
Copy link
Author

hydrohs commented Jan 31, 2024

Cobra is enabled, and /dev_hdd0/boot_plugins.txt exists and has /dev_hdd0/plugins/webftp_server.sprx as its contents. This file does exist, and I am running on CEX mode.

@aldostools
Copy link
Owner

Can you load other plugins? Or are other plugins running that could cause conflicts?

Error 0x8071053D = Server timed out. That means that webMAN MOD is not loaded (or the web server could not be initialized).

An easy way to verify if webMAN MOD is running is pressing SELECT+START. It should show a popup with the system information.

@hydrohs
Copy link
Author

hydrohs commented Jan 31, 2024

Pressing Select + Start does nothing, I have no other plugins loaded. I'd be happy to try some others but I have no clue what other plugins exist that I could test.

@aldostools
Copy link
Owner

There are various plugins included in webMAN MOD.

You can try installing manually VshFtpCounter to check if plugins are loading
https://github.com/TheRouletteBoi/RouLetteVshMenu/releases/tag/fps-counter-2.7

@hydrohs
Copy link
Author

hydrohs commented Jan 31, 2024

Okay, that worked no problem.

@aldostools
Copy link
Owner

Then some setting or external device could be preventing that webMAN MOD load properly.

  • Try deleting /dev_hdd0/tmp/wm_config.bin to reset the settings to the default.
  • Make sure that you have installed the latest webMAN MOD 1.47.45 on Evilnat 4.90
  • Disconnect ALL USB devices (controller, external disk, pendrives, etc.)

If webMAN MOD loads, go to /setup.ps3 and check the option "Disable scan for content at startup". Save and reboot.

@hydrohs
Copy link
Author

hydrohs commented Jan 31, 2024

Unfortunately that made no difference

@KTMGv5
Copy link

KTMGv5 commented Jan 31, 2024

I fixed my issues following this post on this thread and aldostools commented the Information you will need. https://www.psx-place.com/threads/how-to-uninstall-webman-mod.28521/ After delteting the files restart your PS3 and reinstall webMAN MOD from the installer holding L1 after pressing Cross on the installer. DO not DELETE your GAME folder 👍 i spent 6 hours following the internet loophole trust the process if all else fails check and see if Sys 8 is loading ? 💯

@hydrohs
Copy link
Author

hydrohs commented Jan 31, 2024

Alright, I thought I would try replacing the hard drive and starting totally from scratch, but that failed. And upon reinstalling the old drive and starting up, webMAN loaded. "Disable scan for content at startup" was already checked, and after rebooting I'm back to having the same issue. Not sure if that helps or makes things more confusing.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants