Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[EDITOR-367] killupload not working #257

Open
smellai opened this issue Aug 10, 2018 · 1 comment
Open

[EDITOR-367] killupload not working #257

smellai opened this issue Aug 10, 2018 · 1 comment
Assignees
@rsora
Labels
type: imperfection Perceived defect in any part of project

Comments

@smellai
Copy link
Contributor

smellai commented Aug 10, 2018 

killupload
time="2018-08-10T17:46:42+02:00" level=info msg="{\"uploadStatus\": \"Killed\"}" 
time="2018-08-10T17:46:42+02:00" level=info msg="Flashing with command:/home/stefania/.arduino-create/arduino/bossac/1.7.0/bossac -i -d --port=ttyACM0 -U true -i -e -w -v /tmp/arduino-create-agent218692468/sketch_aug10a.bin -R" 
time="2018-08-10T17:46:44+02:00" level=info msg="Set binary mode" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0)=0x20007ffc" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0xe000ed00)=0x410cc601" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41002018)=0x10010305" 
time="2018-08-10T17:46:44+02:00" level=info msg="version()=v2.0 [Arduino:XYZ] Nov 24 2015 11:35:16" 
time="2018-08-10T17:46:44+02:00" level=info msg="chipId=0x10010005" 
time="2018-08-10T17:46:44+02:00" level=info msg="Connected at 921600 baud" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0)=0x20007ffc" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0xe000ed00)=0x410cc601" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41002018)=0x10010305" 
time="2018-08-10T17:46:44+02:00" level=info msg="Atmel SMART device 0x10010005 found" 
time="2018-08-10T17:46:44+02:00" level=info msg="write(addr=0x20004000,size=0x34)" 
time="2018-08-10T17:46:44+02:00" level=info msg="writeWord(addr=0x20004030,value=0x10)" 
time="2018-08-10T17:46:44+02:00" level=info msg="writeWord(addr=0x20004020,value=0x20008000)" 
time="2018-08-10T17:46:44+02:00" level=info msg="Device : ATSAMD21G18A" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0)=0x20007ffc" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0xe000ed00)=0x410cc601" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41002018)=0x10010305" 
time="2018-08-10T17:46:44+02:00" level=info msg="Chip ID : 10010005" 
time="2018-08-10T17:46:44+02:00" level=info msg="version()=v2.0 [Arduino:XYZ] Nov 24 2015 11:35:16" 
time="2018-08-10T17:46:44+02:00" level=info msg="Version : v2.0 [Arduino:XYZ] Nov 24 2015 11:35:16" 
time="2018-08-10T17:46:44+02:00" level=info msg="Address : 8192" 
time="2018-08-10T17:46:44+02:00" level=info msg="Pages : 3968" 
time="2018-08-10T17:46:44+02:00" level=info msg="Page Size : 64 bytes" 
time="2018-08-10T17:46:44+02:00" level=info msg="Total Size : 248KB" 
time="2018-08-10T17:46:44+02:00" level=info msg="Planes : 1" 
time="2018-08-10T17:46:44+02:00" level=info msg="Lock Regions : 16" 
time="2018-08-10T17:46:44+02:00" level=info msg="Locked : readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004020)=0xffff" 
time="2018-08-10T17:46:44+02:00" level=info msg=none 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41004018)=0" 
time="2018-08-10T17:46:44+02:00" level=info msg="Security : false" 
time="2018-08-10T17:46:44+02:00" level=info msg="Boot Flash : true" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x40000834)=0x7000a" 
time="2018-08-10T17:46:44+02:00" level=info msg="BOD : true" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x40000834)=0x7000a" 
time="2018-08-10T17:46:44+02:00" level=info msg="BOR : true" 
time="2018-08-10T17:46:44+02:00" level=info msg="Arduino : FAST_CHIP_ERASE" 
time="2018-08-10T17:46:44+02:00" level=info msg="Arduino : FAST_MULTI_PAGE_WRITE" 
time="2018-08-10T17:46:44+02:00" level=info msg="Arduino : CAN_CHECKSUM_MEMORY_BUFFER" 
time="2018-08-10T17:46:44+02:00" level=info msg="Erase flash" 
time="2018-08-10T17:46:44+02:00" level=info msg="chipErase(addr=0x2000)" 
time="2018-08-10T17:46:44+02:00" level=info msg="done in 0.807 seconds" 
time="2018-08-10T17:46:44+02:00" level=info msg= 
time="2018-08-10T17:46:44+02:00" level=info msg="Write 9848 bytes to flash (154 pages)" 
time="2018-08-10T17:46:44+02:00" level=info msg="write(addr=0x20005000,size=0x1000)" 
time="2018-08-10T17:46:44+02:00" level=info msg="writeBuffer(scr_addr=0x20005000, dst_addr=0x2000, size=0x1000)" 
time="2018-08-10T17:46:44+02:00" level=info msg="\r[============ ] 41% (64/154 pages)write(addr=0x20005000,size=0x1000)" 
time="2018-08-10T17:46:44+02:00" level=info msg="writeBuffer(scr_addr=0x20005000, dst_addr=0x3000, size=0x1000)" 
time="2018-08-10T17:46:44+02:00" level=info msg="\r[======================== ] 83% (128/154 pages)write(addr=0x20005000,size=0x680)" 
time="2018-08-10T17:46:44+02:00" level=info msg="writeBuffer(scr_addr=0x20005000, dst_addr=0x4000, size=0x680)" 
time="2018-08-10T17:46:44+02:00" level=info msg="\r[==============================] 100% (154/154 pages)" 
time="2018-08-10T17:46:44+02:00" level=info msg="done in 0.067 seconds" 
time="2018-08-10T17:46:44+02:00" level=info msg= 
time="2018-08-10T17:46:44+02:00" level=info msg="Verify 9848 bytes of flash with checksum." 
time="2018-08-10T17:46:44+02:00" level=info msg="checksumBuffer(start_addr=0x2000, size=0x1000) = 50ba" 
time="2018-08-10T17:46:44+02:00" level=info msg="checksumBuffer(start_addr=0x3000, size=0x1000) = 3d7c" 
time="2018-08-10T17:46:44+02:00" level=info msg="checksumBuffer(start_addr=0x4000, size=0x678) = 9c73" 
time="2018-08-10T17:46:44+02:00" level=info msg="Verify successful" 
time="2018-08-10T17:46:44+02:00" level=info msg="done in 0.007 seconds" 
time="2018-08-10T17:46:44+02:00" level=info msg="CPU reset." 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0)=0x20007ffc" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0xe000ed00)=0x410cc601" 
time="2018-08-10T17:46:44+02:00" level=info msg="readWord(addr=0x41002018)=0x10010305" 
time="2018-08-10T17:46:44+02:00" level=info msg="writeWord(addr=0xe000ed0c,value=0x5fa0004)"

got message msg="{\"uploadStatus\": \"Killed\"}
but upload goes ahead
@rsora rsora changed the title killupload not working [WE-102] killupload not working Aug 10, 2018
@facchinm
Copy link
Member

It looks like killupload has been issued before the actual upload start, probably during the 1200 bps phase.
The only way to solve this is to cache the kill request and evaluate it before starting the actual upload (see https://github.com/arduino/arduino-create-agent/blob/devel/upload/upload.go#L150 and https://github.com/arduino/arduino-create-agent/blob/devel/upload/upload.go#L144)

@smellai smellai changed the title [WE-102] killupload not working [EDITOR-367] killupload not working Jan 19, 2021
@fstasi fstasi removed the type: bug label Sep 16, 2021
@rsora rsora added the type: imperfection Perceived defect in any part of project label Sep 22, 2021
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@rsora rsora

Labels
type: imperfection Perceived defect in any part of project
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@fstasi @smellai @facchinm @rsora