p10k.zsh

# Generated by Powerlevel10k configuration wizard on 2020-08-27 at 14:40 AEST.
# Based on romkatv/powerlevel10k/config/p10k-classic.zsh, checksum 47547.
# Wizard options: nerdfont-complete + powerline, large icons, classic, darkest,
# angled separators, sharp heads, flat tails, 2 lines, dotted, no frame, compact,
# few icons, concise.
# Type `p10k configure` to generate another config.
#
# Config for Powerlevel10k with classic powerline prompt style. Type `p10k configure` to generate
# your own config based on it.
#
# Tip: Looking for a nice color? Here's a one-liner to print colormap.
#
#   for i in {0..255}; do print -Pn "%${i}F${(l:3::0:)i}%f " ${${(M)$((i%8)):#7}:+$'\n'}; done

# Temporarily change options.
'builtin' 'local' '-a' 'p10k_config_opts'
[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'


() {
  emulate -L zsh
  setopt no_unset extended_glob
  zmodload zsh/langinfo
  if [[ ${langinfo[CODESET]:-} != (utf|UTF)(-|)8 ]]; then
    local LC_ALL=${${(@M)$(locale -a):#*.(utf|UTF)(-|)8}[1]:-en_US.UTF-8}
  fi

  # Unset all configuration options. This allows you to apply configiguration changes without
  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
  unset -m 'POWERLEVEL9K_*'

  # The list of segments shown on the left. Fill it with the most important segments.
  typeset -ga POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
      # =========================[ Line #1 ]=========================
      # os_icon               # os identifier
      dir                     # current directory
      vcs                     # git status
      # =========================[ Line #2 ]=========================
      newline
      prompt_char             # prompt symbol
  )

  # The list of segments shown on the right. Fill it with less important segments.
  # Right prompt on the last prompt line (where you are typing your commands) gets
  # automatically hidden when the input line reaches it. Right prompt above the
  # last prompt line gets hidden if it would overlap with left prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
      # =========================[ Line #1 ]=========================
      status                  # exit code of the last command
      command_execution_time  # duration of the last command
      background_jobs         # presence of background jobs
      # virtualenv              # python virtual environment (https://docs.python.org/3/library/venv.html)
      # anaconda                # conda environment (https://conda.io/)
      # pyenv                   # python environment (https://github.com/pyenv/pyenv)
      # nodenv                  # node.js version from nodenv (https://github.com/nodenv/nodenv)
      # nvm                     # node.js version from nvm (https://github.com/nvm-sh/nvm)
      # nodeenv                 # node.js environment (https://github.com/ekalinin/nodeenv)
      # node_version          # node.js version
      # go_version            # go version (https://golang.org)
      # rust_version          # rustc version (https://www.rust-lang.org)
      # dotnet_version        # .NET version (https://dotnet.microsoft.com)
      # rbenv                   # ruby version from rbenv (https://github.com/rbenv/rbenv)
      # rvm                     # ruby version from rvm (https://rvm.io)
      kubecontext             # current kubernetes context (https://kubernetes.io/)
      terraform               # terraform workspace (https://www.terraform.io)
      aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
      # context                 # user@hostname
      # nordvpn                 # nordvpn connection status, linux only (https://nordvpn.com/)
      # ranger                  # ranger shell (https://github.com/ranger/ranger)
      # vpn_ip                # virtual private network indicator
      # ram                   # free RAM
      # load                  # CPU load
      # time                  # current time
      # public_ip             # public IP address
      # =========================[ Line #2 ]=========================
      newline
      # proxy                 # system-wide http/https/ftp proxy
      # battery               # internal battery
      # example               # example user-defined segment (see prompt_example function below)
  )

  # To disable default icons for all segments, set POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION=''.
  #
  # To enable default icons for all segments, don't define POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION
  # or set it to '${P9K_VISUAL_IDENTIFIER}'.
  #
  # To remove trailing space from all default icons, set POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION
  # to '${P9K_VISUAL_IDENTIFIER% }'.
  #
  # To enable default icons for one segment (e.g., dir), set
  # POWERLEVEL9K_DIR_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'.
  #
  # To assign a specific icon to one segment (e.g., dir), set
  # POWERLEVEL9K_DIR_VISUAL_IDENTIFIER_EXPANSION='⭐'.
  #
  # To assign a specific icon to a segment in a given state (e.g., dir in state NOT_WRITABLE),
  # set POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'.
  #
  # Note: You can use $'\u2B50' instead of '⭐'. It's especially convenient when specifying
  # icons that your text editor cannot render. Don't forget to put $ and use single quotes when
  # defining icons via Unicode codepoints.
  #
  # Note: Many default icons cannot be displayed with system fonts. You'll need to install a
  # capable font to use them. See POWERLEVEL9K_MODE below.
  typeset -g POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'

  # This option makes a difference only when default icons are enabled for all or some prompt
  # segments (see POWERLEVEL9K_VISUAL_IDENTIFIER_EXPANSION above). LOCK_ICON can be printed as
  # $'\uE0A2', $'\uE138' or $'\uF023' depending on POWERLEVEL9K_MODE. The correct value of this
  # parameter depends on the provider of the font your terminal is using.
  #
  #   Font Provider                    | POWERLEVEL9K_MODE
  #   ---------------------------------+-------------------
  #   Powerline                        | powerline
  #   Font Awesome                     | awesome-fontconfig
  #   Adobe Source Code Pro            | awesome-fontconfig
  #   Source Code Pro                  | awesome-fontconfig
  #   Awesome-Terminal Fonts (regular) | awesome-fontconfig
  #   Awesome-Terminal Fonts (patched) | awesome-patched
  #   Nerd Fonts                       | nerdfont-complete
  #   Other                            | compatible
  #
  # If this looks overwhelming, either stick with a preinstalled system font and set
  # POWERLEVEL9K_MODE=compatible, or install the recommended Powerlevel10k font from
  # https://github.com/romkatv/powerlevel10k/#recommended-meslo-nerd-font-patched-for-powerlevel10k
  # and set POWERLEVEL9K_MODE=nerdfont-complete.
  typeset -g POWERLEVEL9K_MODE=nerdfont-complete

  # When set to true, icons appear before content on both sides of the prompt. When set
  # to false, icons go after content. If empty or not set, icons go before content in the left
  # prompt and after content in the right prompt.
  #
  # You can also override it for a specific segment:
  #
  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
  #
  # Or for a specific segment in specific state:
  #
  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=

  # Add an empty line before each prompt.
  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=false

  # Connect left prompt lines with these symbols. You'll probably want to use the same color
  # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
  # Connect right prompt lines with these symbols.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=

  # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
  # '─'. The last two make it easier to see the alignment between left and right prompt and to
  # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
  # for more compact prompt if using using this option.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='·'
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
  if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
    # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
    # ornaments defined above.
    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=238
    # Start filler from the edge of the screen if there are no left segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
    # End filler on the edge of the screen if there are no right segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
  fi

  # Default background color.
  typeset -g POWERLEVEL9K_BACKGROUND=234

  # Separator between same-color segments on the left.
  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='%242F\uE0B1'
  # Separator between same-color segments on the right.
  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='%242F\uE0B3'
  # Separator between different-color segments on the left.
  typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR='\uE0B0'
  # Separator between different-color segments on the right.
  typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2'
  # The right end of left prompt.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
  # The left end of right prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
  # The left end of left prompt.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
  # The right end of right prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
  # Left prompt terminator for lines without any segments.
  typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=

  #################################[ os_icon: os identifier ]##################################
  # OS identifier color.
  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=255
  # Make the icon bold.
  typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='%B${P9K_CONTENT}'

  ################################[ prompt_char: prompt symbol ]################################
  # Transparent background.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
  # White prompt symbol if the last command succeeded.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS}_FOREGROUND=15
  # Red prompt symbol if the last command failed.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS}_FOREGROUND=196
  # Default prompt symbol.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='$'
  # Prompt symbol in command vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
  # Prompt symbol in visual vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='Ⅴ'
  # Prompt symbol in overwrite vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
  # No line terminator if prompt_char is the last segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
  # No line introducer if prompt_char is the first segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
  # No surrounding whitespace.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE=

  ##################################[ dir: current directory ]##################################
  # Default current directory color.
  typeset -g POWERLEVEL9K_DIR_FOREGROUND=31
  # If directory is too long, shorten some of its segments to the shortest possible unique
  # prefix. The shortened directory can be tab-completed to the original.
  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
  # Replace removed segment suffixes with this symbol.
  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
  # Color of the shortened directory segments.
  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=103
  # Color of the anchor directory segments. Anchor segments are never shortened. The first
  # segment is always an anchor.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=39
  # Display anchor directory segments in bold.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=true
  # Don't shorten directories that contain any of these files. They are anchors.
  local anchor_files=(
    .bzr
    .citc
    .git
    .hg
    .node-version
    .python-version
    .ruby-version
    .shorten_folder_marker
    .svn
    .terraform
    CVS
    Cargo.toml
    composer.json
    go.mod
    package.json
  )
  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
  # Don't shorten this many last directory segments. They are anchors.
  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
  # Shorten directory if it's longer than this even if there is space for it. The value can
  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
  # directory will be shortened only when prompt doesn't fit.
  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
  # many columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
  # If set to true, embed a hyperlink into the directory. Useful for quickly
  # opening a directory in the file manager simply by clicking the link.
  # Can also be handy when the directory is shortened, as it allows you to see
  # the full directory that was used in previous commands.
  typeset -g POWERLEVEL9K_DIR_HYPERLINK=false

  # Enable special styling for non-writable directories.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true
  # Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE
  # above must be set to true for this parameter to have effect.
  # typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'

  # Custom prefix.
  # typeset -g POWERLEVEL9K_DIR_PREFIX='%244Fin '

  # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons for different directories.
  # It must be an array with 3 * N elements. Each triplet consists of:
  #
  #   1. A pattern against which the current directory is matched. Matching is done with
  #      extended_glob option enabled.
  #   2. Directory class for the purpose of styling.
  #   3. Icon.
  #
  # Triplets are tried in order. The first triplet whose pattern matches $PWD wins. If there
  # are no matches, the directory will have no icon.
  #
  # Example:
  #
  #   typeset -g POWERLEVEL9K_DIR_CLASSES=(
  #       '~/work(/*)#'  WORK     '(╯°□°）╯︵ ┻━┻'
  #       '~(/*)#'       HOME     '⌂'
  #       '*'            DEFAULT  '')
  #
  # With these settings, the current directory in the prompt may look like this:
  #
  #   (╯°□°）╯︵ ┻━┻ ~/work/projects/important/urgent
  #
  # Or like this:
  #
  #   ⌂ ~/best/powerlevel10k
  #
  # You can also set different colors for directories of different classes. Remember to override
  # FOREGROUND, SHORTENED_FOREGROUND and ANCHOR_FOREGROUND for every directory class that you wish
  # to have its own color.
  #
  #   typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=31
  #   typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=103
  #   typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=39
  #
  typeset -g POWERLEVEL9K_DIR_CLASSES=()

  #####################################[ vcs: git status ]######################################
  # Branch icon. Set this parameter to '\uF126 ' for the popular Powerline branch icon.
  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=

  # Untracked files icon. It's really a question mark, your font isn't broken.
  # Change the value of this parameter to show a different icon.
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'

  # Git status: feature:master#tag ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
  #
  # You can edit the lines below to customize how Git status looks.
  #
  # VCS_STATUS parameters are set by gitstatus plugin. See reference:
  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
  local vcs=''
  # If on a branch...
  vcs+='${${VCS_STATUS_LOCAL_BRANCH:+%76F'${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}
  # If local branch name is at most 32 characters long, show it in full.
  # This is the equivalent of POWERLEVEL9K_VCS_SHORTEN_MIN_LENGTH=32.
  vcs+='${${${$(( ${#VCS_STATUS_LOCAL_BRANCH}<=100 )):#0}:+${VCS_STATUS_LOCAL_BRANCH//\%/%%}}'
  # If local branch name is over 32 characters long, show the first 12 … the last 12. The same as
  # POWERLEVEL9K_VCS_SHORTEN_LENGTH=12 with POWERLEVEL9K_VCS_SHORTEN_STRATEGY=truncate_middle.
  vcs+=':-${${VCS_STATUS_LOCAL_BRANCH:0:12}//\%/%%}%28F…%76F${${VCS_STATUS_LOCAL_BRANCH: -12}//\%/%%}}}'
  # '@72f5c8a' if not on a branch.
  vcs+=':-%f@%76F${VCS_STATUS_COMMIT:0:8}}'
  # ':master' if the tracking branch name differs from local branch.
  vcs+='${${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH}:+%f:%76F${VCS_STATUS_REMOTE_BRANCH//\%/%%}}'
  # '#tag' if on a tag.
  vcs+='${VCS_STATUS_TAG:+%f#%76F${VCS_STATUS_TAG//\%/%%}}'
  # ⇣42 if behind the remote.
  vcs+='${${VCS_STATUS_COMMITS_BEHIND:#0}:+ %76F⇣${VCS_STATUS_COMMITS_BEHIND}}'
  # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
  # If you want '⇣42 ⇡42' instead, replace '${${(M)VCS_STATUS_COMMITS_BEHIND:#0}:+ }' with ' '.
  vcs+='${${VCS_STATUS_COMMITS_AHEAD:#0}:+${${(M)VCS_STATUS_COMMITS_BEHIND:#0}:+ }%76F⇡${VCS_STATUS_COMMITS_AHEAD}}'
  # *42 if have stashes.
  vcs+='${${VCS_STATUS_STASHES:#0}:+ %76F*${VCS_STATUS_STASHES}}'
  # 'merge' if the repo is in an unusual state.
  vcs+='${VCS_STATUS_ACTION:+ %196F${VCS_STATUS_ACTION//\%/%%}}'
  # ~42 if have merge conflicts.
  vcs+='${${VCS_STATUS_NUM_CONFLICTED:#0}:+ %196F~${VCS_STATUS_NUM_CONFLICTED}}'
  # +42 if have staged changes.
  vcs+='${${VCS_STATUS_NUM_STAGED:#0}:+ %178F+${VCS_STATUS_NUM_STAGED}}'
  # !42 if have unstaged changes.
  vcs+='${${VCS_STATUS_NUM_UNSTAGED:#0}:+ %178F!${VCS_STATUS_NUM_UNSTAGED}}'
  # ?42 if have untracked files. It's really a question mark, your font isn't broken.
  # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
  # Remove the next line if you don't want to see untracked files at all.
  vcs+='${${VCS_STATUS_NUM_UNTRACKED:#0}:+ %39F'${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}'${VCS_STATUS_NUM_UNTRACKED}}'
  # If P9K_CONTENT is not empty, leave it unchanged. It's either "loading" or from vcs_info.
  vcs="\${P9K_CONTENT:-$vcs}"

  # Disable the default Git status formatting.
  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
  # Install our own Git status formatter.
  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION=$vcs
  # When Git status is being refreshed asynchronously, display the last known repo status in grey.
  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION=${${${vcs//\%f}//\%<->F}//\%F\{(\#|)[[:xdigit:]]#(\\|)\}}
  # Enable counters for staged, unstaged, etc.
  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1

  # Icon color.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=76
  # Custom icon.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  # typeset -g POWERLEVEL9K_VCS_PREFIX='%244Fon '

  # Show status of repositories of these types. You can add svn and/or hg if you are
  # using them. If you do, your prompt may become slow even when your current directory
  # isn't in an svn or hg reposotiry.
  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)

  typeset -g POWERLEVEL9K_VCS_LOADING_FOREGROUND=242
  # These settings are used for respositories other than Git or when gitstatusd fails and
  # Powerlevel10k has to fall back to using vcs_info.
  typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=76
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=76
  typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=178

  ##########################[ status: exit code of the last command ]###########################
  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
  # style them independently from the regular OK and ERROR state.
  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true

  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
  # it will signify success by turning green.
  typeset -g POWERLEVEL9K_STATUS_OK=false
  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=70
  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'

  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
  # like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=70
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'

  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
  # it will signify error by turning red.
  typeset -g POWERLEVEL9K_STATUS_ERROR=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='↵'

  # Status when the last command was terminated by a signal.
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
  # Use terse signal names: "INT" instead of "SIGINT(2)".
  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='↵'

  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
  # It may look like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='↵'

  ###################[ command_execution_time: duration of the last command ]###################
  # Background color.
  # Show duration of the last command if takes longer than this many seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
  # Show this many fractional digits. Zero means round to seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
  # Execution time color.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=248
  # Duration format: 1d 2h 3m 4s.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
  # Custom icon.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%244Ftook '

  #######################[ background_jobs: presence of background jobs ]#######################
  # Don't show the number of background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
  # Background jobs color.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=37
  # Icon to show when there are background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'

  ##########[ nordvpn: nordvpn connection status, linux only (https://nordvpn.com/) ]###########
  # NordVPN connection indicator color.
  typeset -g POWERLEVEL9K_NORDVPN_FOREGROUND=39
  # Hide NordVPN connection indicator when not connected.
  typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION=
  typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION=
  # Custom icon.
  # typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #################[ ranger: ranger shell (https://github.com/ranger/ranger) ]##################
  # Ranger shell color.
  typeset -g POWERLEVEL9K_RANGER_FOREGROUND=178
  # Custom icon.
  # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ######################################[ ram: free RAM ]#######################################
  # RAM color.
  typeset -g POWERLEVEL9K_RAM_FOREGROUND=66
  # Custom icon.
  typeset -g POWERLEVEL9K_RAM_VISUAL_IDENTIFIER_EXPANSION=''

  ######################################[ load: CPU load ]######################################
  # Show average CPU load over this many last minutes. Valid values are 1, 5 and 15.
  typeset -g POWERLEVEL9K_LOAD_WHICH=5
  # Load color when load is under 50%.
  typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=66
  # Load color when load is between 50% and 70%.
  typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=178
  # Load color when load is over 70%.
  typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=166
  # Custom icon.
  # typeset -g POWERLEVEL9K_LOAD_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##################################[ context: user@hostname ]##################################
  # Default context color.
  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=180
  # Default context format: %n is username, %m is hostname.
  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'

  # Context color when running with privileges.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=178
  # Context format when running with privileges: bold user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%B%n@%m'

  # Don't show context unless running with privileges or in SSH.
  # Tip: Remove the next line to always show context.
  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=

  # Custom icon.
  # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%244Fwith '

  ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
  # Python virtual environment color.
  typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=37
  # Don't show Python version next to the virtual environment name.
  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
  # Separate environment name from Python version only with a space.
  typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
  # Custom icon.
  # typeset -g POWERLEVEL9K_VIRTUALENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #####################[ anaconda: conda environment (https://conda.io/) ]######################
  # Anaconda environment color.
  typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=37
  # Don't show Python version next to the anaconda environment name.
  typeset -g POWERLEVEL9K_ANACONDA_SHOW_PYTHON_VERSION=false
  # Separate environment name from Python version only with a space.
  typeset -g POWERLEVEL9K_ANACONDA_{LEFT,RIGHT}_DELIMITER=
  # Custom icon.
  # typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################
  # Pyenv color.
  typeset -g POWERLEVEL9K_PYENV_FOREGROUND=37
  # Don't show the current Python version if it's the same as global.
  typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]##########
  # Nodenv color.
  typeset -g POWERLEVEL9K_NODENV_FOREGROUND=70
  # Don't show node version if it's the same as global: $(nodenv version-name) == $(nodenv global).
  typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]###############
  # Nvm color.
  typeset -g POWERLEVEL9K_NVM_FOREGROUND=70
  # Custom icon.
  # typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############
  # Nodeenv color.
  typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=70
  # Don't show Node version next to the environment name.
  typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false
  # Separate environment name from Node version only with a space.
  typeset -g POWERLEVEL9K_NODEENV_{LEFT,RIGHT}_DELIMITER=
  # Custom icon.
  # typeset -g POWERLEVEL9K_NODEENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##############################[ node_version: node.js version ]###############################
  # Node version color.
  typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=70
  # Show node version only when in a directory tree containing package.json.
  typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_NODE_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######################[ go_version: go version (https://golang.org) ]########################
  # Go version color.
  typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=37
  # Show go version only when in a go project subdirectory.
  typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_GO_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #################[ rust_version: rustc version (https://www.rust-lang.org) ]##################
  # Rust version color.
  typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=37
  # Show rust version only when in a rust project subdirectory.
  typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################
  # .NET version color.
  typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=134
  # Show .NET version only when in a .NET project subdirectory.
  typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]##############
  # Rbenv color.
  typeset -g POWERLEVEL9K_RBENV_FOREGROUND=168
  # Don't show ruby version if it's the same as global: $(rbenv version-name) == $(rbenv global).
  typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######################[ rvm: ruby version from rvm (https://rvm.io) ]########################
  # Rvm color.
  typeset -g POWERLEVEL9K_RVM_FOREGROUND=168
  # Don't show @gemset at the end.
  typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false
  # Don't show ruby- at the front.
  typeset -g POWERLEVEL9K_RVM_SHOW_PREFIX=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_RVM_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ################[ terraform: terraform workspace (https://www.terraform.io) ]#################
  # Terraform color.
  typeset -g POWERLEVEL9K_TERRAFORM_FOREGROUND=38
  # Custom icon.
  # typeset -g POWERLEVEL9K_TERRAFORM_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]#
  # AWS profile color.
  typeset -g POWERLEVEL9K_AWS_FOREGROUND=208
  # Custom icon.
  # typeset -g POWERLEVEL9K_AWS_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]#############
  # Kubernetes context classes for the purpose of using different colors, icons and expansions with
  # different contexts.
  #
  # POWERLEVEL9K_KUBECONTEXT_CLASSES is an array with even number of elements. The first element
  # in each pair defines a pattern against which the current kubernetes context gets matched.
  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
  # that gets matched. If you unset all POWERLEVEL9K_KUBECONTEXT_*CONTENT_EXPANSION parameters,
  # you'll see this value in your prompt. The second element of each pair in
  # POWERLEVEL9K_KUBECONTEXT_CLASSES defines the context class. Patterns are tried in order. The
  # first match wins.
  #
  # For example, given these settings:
  #
  #   typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
  #     '*prod*'  PROD
  #     '*test*'  TEST
  #     '*'       DEFAULT)
  #
  # If your current kubernetes context is "deathray-testing/default", its class is TEST
  # because "deathray-testing/default" doesn't match the pattern '*prod*' but does match '*test*'.
  #
  # You can define different colors, icons and content expansions for different classes:
  #
  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_FOREGROUND=28
  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_KUBECONTEXT_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
  typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
      '*eng*'   ENG     # Engineering development site
      '*kind*'  DEFAULT
      '*'       PROD ) #

  typeset -g POWERLEVEL9K_KUBECONTEXT_PROD_FOREGROUND=000
  typeset -g POWERLEVEL9K_KUBECONTEXT_PROD_BACKGROUND=009
  typeset -g POWERLEVEL9K_KUBECONTEXT_PROD_VISUAL_IDENTIFIER_EXPANSION=' CLIENT PRODUCTION SITE '
  typeset -g POWERLEVEL9K_KUBECONTEXT_ENG_FOREGROUND=009
  typeset -g POWERLEVEL9K_KUBECONTEXT_ENG_VISUAL_IDENTIFIER_EXPANSION=''

  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=134
  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION=''

  # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext
  # segment. Parameter expansions are very flexible and fast, too. See reference:
  # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
  #
  # Within the expansion the following parameters are always available:
  #
  # - P9K_CONTENT                The content that would've been displayed if there was no content
  #                              expansion defined.
  # - P9K_KUBECONTEXT_NAME       The current context's name. Corresponds to column NAME in the
  #                              output of `kubectl config get-contexts`.
  # - P9K_KUBECONTEXT_CLUSTER    The current context's cluster. Corresponds to column CLUSTER in the
  #                              output of `kubectl config get-contexts`.
  # - P9K_KUBECONTEXT_NAMESPACE  The current context's namespace. Corresponds to column NAMESPACE
  #                              in the output of `kubectl config get-contexts`. If there is no
  #                              namespace, the parameter is set to "default".
  #
  # If the context points to Google Kubernetes Engine (GKE) or Elastic Kubernetes Service (EKS),
  # the following extra parameters are available:
  #
  # - P9K_KUBECONTEXT_CLOUD_NAME     Either "gke" or "eks".
  # - P9K_KUBECONTEXT_CLOUD_ACCOUNT  Account/project ID.
  # - P9K_KUBECONTEXT_CLOUD_ZONE     Availability zone.
  # - P9K_KUBECONTEXT_CLOUD_CLUSTER  Cluster.
  #
  # P9K_KUBECONTEXT_CLOUD_* parameters are derived from P9K_KUBECONTEXT_CLUSTER. For example,
  # if P9K_KUBECONTEXT_CLUSTER is "gke_my-account_us-east1-a_my-cluster-01":
  #
  #   - P9K_KUBECONTEXT_CLOUD_NAME=gke
  #   - P9K_KUBECONTEXT_CLOUD_ACCOUNT=my-account
  #   - P9K_KUBECONTEXT_CLOUD_ZONE=us-east1-a
  #   - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
  #
  # If P9K_KUBECONTEXT_CLUSTER is "arn:aws:eks:us-east-1:123456789012:cluster/my-cluster-01":
  #
  #   - P9K_KUBECONTEXT_CLOUD_NAME=eks
  #   - P9K_KUBECONTEXT_CLOUD_ACCOUNT=123456789012
  #   - P9K_KUBECONTEXT_CLOUD_ZONE=us-east-1
  #   - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION=
  # Show P9K_KUBECONTEXT_CLOUD_CLUSTER if it's not empty and fall back to P9K_KUBECONTEXT_NAME.
  POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${P9K_KUBECONTEXT_CLOUD_CLUSTER:-${P9K_KUBECONTEXT_NAME}}'
  # Append the current context's namespace if it's not "default".
  POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}'

  # Custom prefix.
  # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%244Fat '

  ###############################[ public_ip: public IP address ]###############################
  # Public IP color.
  typeset -g POWERLEVEL9K_PUBLIC_IP_FOREGROUND=94
  # Custom icon.
  # typeset -g POWERLEVEL9K_PUBLIC_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ########################[ vpn_ip: virtual private network indicator ]#########################
  # VPN IP color.
  typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=81
  # When on VPN, show just an icon without the IP address.
  typeset -g POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION=
  # Regular expression for the VPN network interface. Run ifconfig while on VPN to see the
  # name of the interface.
  typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(wg|(.*tun))[0-9]*'
  # Custom icon.
  # typeset -g POWERLEVEL9K_VPN_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #########################[ proxy: system-wide http/https/ftp proxy ]##########################
  # Proxy color.
  typeset -g POWERLEVEL9K_PROXY_FOREGROUND=68
  # Custom icon.
  # typeset -g POWERLEVEL9K_PROXY_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ################################[ battery: internal battery ]#################################
  # Show battery in red when it's below this level and not connected to power supply.
  typeset -g POWERLEVEL9K_BATTERY_LOW_THRESHOLD=20
  typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=160
  # Show battery in green when it's charging or fully charged.
  typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=70
  # Show battery in yellow when it's discharging.
  typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=178
  # Battery pictograms going from low to high level of charge.
  typeset -g POWERLEVEL9K_BATTERY_STAGES=$'\uf58d\uf579\uf57a\uf57b\uf57c\uf57d\uf57e\uf57f\uf580\uf581\uf578'
  # Don't show the remaining time to charge/discharge.
  typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false

  ####################################[ time: current time ]####################################
  # Current time color.
  typeset -g POWERLEVEL9K_TIME_FOREGROUND=66
  # Format for the current time: 09:51:02. See `man 3 strftime`.
  typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}'
  # If set to true, time will update when you hit enter. This way prompts for the past
  # commands will contain the start times of their commands as opposed to the default
  # behavior where they contain the end times of their preceding commands.
  typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
  # Custom icon.
  typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  # typeset -g POWERLEVEL9K_TIME_PREFIX='%244Fat '

  # Example of a user-defined prompt segment. Function prompt_example will be called on every
  # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or
  # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and orange text greeting the user.
  #
  # Type `p10k help segment` for documentation and a more sophisticated example.
  function prompt_example() {
    p10k segment -f 208 -i '⭐' -t 'hello, %n'
  }

  # User-defined prompt segments can be customized the same way as built-in segments.
  typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=208
  typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'
}

setopt ${p10k_config_opts[@]}
'builtin' 'unset' 'p10k_config_opts'