You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
In "conversion_plus tech", with more than one carrier set, is not possible to define separately the "om_con" or "om_prod" between different carriers under the "cost" voice.
Is possible only to set the cost value regarding the primary carrier, and the secondary carrier cost should be calculated with "carrier_ratios". However, this ratio is energy-based, therefore is different by the cost ratio between carriers.
Calliope version
0.6.7
The text was updated successfully, but these errors were encountered:
This is a design choice, not to have an arbitrary number of definable costs (+capacities, etc.) for conversion_plus technologies. This means that you can only link costs to primary_carrier_in and primary_carrier_out.
Problem description
Describe the problem or error here
In "conversion_plus tech", with more than one carrier set, is not possible to define separately the "om_con" or "om_prod" between different carriers under the "cost" voice.
Is possible only to set the cost value regarding the primary carrier, and the secondary carrier cost should be calculated with "carrier_ratios". However, this ratio is energy-based, therefore is different by the cost ratio between carriers.
Calliope version
0.6.7
The text was updated successfully, but these errors were encountered: