Skip to content

Latest commit

 

History

History
418 lines (283 loc) · 13.9 KB

INSTALL.txt

File metadata and controls

418 lines (283 loc) · 13.9 KB

Installing MAAS

There are two main ways to install MAAS:

MAAS Packages and Repositories

MAAS Packages

Installing MAAS from packages is straightforward. There are actually several packages that go into making up a working MAAS install, but for convenience, many of these have been gathered into a virtual package called 'maas' which will install the necessary components for a 'seed cloud', that is a single server that will directly control a group of nodes. The main packages are:

  • maas - seed cloud setup, which includes both the region controller and the rack controller below.
  • maas-region-controller - includes the web UI, API and database.
  • maas-rack-controller - controls a group of machines under a rack or multiple racks, including DHCP management.
  • maas-dhcp/maas-dns - required when managing dhcp/dns.
  • maas-proxy - required to provide a MAAS proxy.

If you need to separate these services or want to deploy an additional rack controller, you should install the corresponding packages individually (see :ref:`the description of a typical setup <setup>` for more background on how a typical hardware setup might be arranged).

There are two suggested additional packages 'maas-dhcp' and 'maas-dns'. These set up MAAS-controlled DHCP and DNS services which greatly simplify deployment if you are running a typical setup where the MAAS controller can run the network (Note: These must be installed if you later set the options in the web interface to have MAAS manage DHCP/DNS).

MAAS Package Repositories

While MAAS is available in the Ubuntu Archives per each release of Ubuntu, the version might not be the latest. However, if you would like to install a newer version of MAAS (the latest stable release), this is available in the following PPA:

Note

The MAAS team also releases the latest development release of MAAS. The development release is available in ppa:maas/next. However, this is meant to be used for testing and at your own risk.

Adding MAAS package repository is simple. At the command line, type:

$ sudo add-apt-repository ppa:maas/stable

You will be asked to confirm whether you would like to add this repository, and its key. Upon configumation, the following needs to be typed at the command line:

$ sudo apt-get update

Installing MAAS from the command line

Installing a Single Node MAAS

At the command line, type:

$ sudo apt-get install maas

This will install both the MAAS Region Controller and the MAAS Rack Controller, and will select sane defaults for the communication between the Rack Controller and the Region Controller. After installation, you can access the Web Interface. Then, there are just a few more setup steps :ref:`post_install`

Reconfiguring a MAAS Installation

You will see a list of packages and a confirmation message to proceed. The exact list will obviously depend on what you already have installed on your server, but expect to add about 200MB of files.

The configuration for the MAAS controller will automatically run and pop up this config screen:

media/install_cluster-config.*

Here you will need to enter the hostname for where the region controller can be contacted. In many scenarios, you may be running the region controller (i.e. the web and API interface) from a different network address, for example where a server has several network interfaces.

Adding Rack Controllers

If you would like to add additional MAAS Rack Controllers to your MAAS setup, you can do so by following the instructions in :doc:`rack-configuration`.

Installing MAAS from Ubuntu Server boot media

If you are installing MAAS as part of a fresh install it is easiest to choose the "Multiple Server install with MAAS" option from the installer and have pretty much everything set up for you. Boot from the Ubuntu Server media and you will be greeted with the usual language selection screen:

media/install_01.*

On the next screen, you will see there is an entry in the menu called "Multiple server install with MAAS". Use the cursor keys to select this and then press Enter.

media/install_02.*

The installer then runs through the usual language and keyboard options. Make your selections using Tab/Cursor keys/Enter to proceed through the install. The installer will then load various drivers, which may take a moment or two.

media/install_03.*

The next screen asks for the hostname for this server. Choose something appropriate for your network.

media/install_04.*

Finally we get to the MAAS part! Here there are just two options. We want to "Create a new MAAS on this server" so go ahead and choose that one.

media/install_05.*

The install now continues as usual. Next you will be prompted to enter a username. This will be the admin user for the actual server that MAAS will be running on (not the same as the MAAS admin user!)

media/install_06.*

As usual you will have the chance to encrypt your home directory. Continue to make selections based on whatever settings suit your usage.

media/install_07.*

After making selections and partitioning storage, the system software will start to be installed. This part should only take a few minutes.

media/install_09.*

Various packages will now be configured, including the package manager and update manager. It is important to set these up appropriately so you will receive timely updates of the MAAS server software, as well as other essential services that may run on this server.

media/install_10.*

The configuration for MAAS will ask you to configure the host address of the server. This should be the IP address you will use to connect to the server (you may have additional interfaces e.g. to run node subnets)

media/install_cluster-config.*

The next screen will confirm the web address that will be used to the web interface.

media/install_controller-config.*

After configuring any other packages the installer will finally come to and end. At this point you should eject the boot media.

media/install_14.*

After restarting, you should be able to login to the new server with the information you supplied during the install. The MAAS software will run automatically.

media/install_15.*

NOTE: The maas-dhcp and maas-dns packages should be installed by default, but on older releases of MAAS they won't be. If you want to have MAAS run DHCP and DNS services, you should install these packages. Check whether they are installed with:

$ dpkg -l maas-dhcp maas-dns

If they are missing, then:

$ sudo apt-get install maas-dhcp maas-dns

And then proceed to the post-install setup.

Installing MAAS in a LXC container

Installing MAAS in a container is a typical setup for those users who would like to take advantange of their machine for other users at the same time of using MAAS.

In order to setup MAAS, you need some requirements:

  • Create a bridge (for example, it can be br0).
  • Install LXD and ZFS.
  • Create a Container profile for MAAS

Install LXD and ZFS

The first thing to do is to install LXD and ZFS:

$ sudo apt-get install lxd zfsutils-linux
$ sudo modprobe zfs
$ sudo lxd init

Create a LXC profile for MAAS

First, create a container profile for MAAS:

$ lxc profile create maas

Second, bind the NIC inside the container (eth0) against the bridge on the physical host (br0):

$ lxc profile device set maas eth0 parent br0

Finally, create a root disk for the container to use:

$ lxc profile device add maas root disk path=/ pool=default

Launch LXD container

Once the profile has been created, you can now launch the LXC container:

$ lxc launch -p maas ubuntu-daily:18.04 bionic-maas

Install MAAS

Once the container is running, you can now install MAAS. First you need to access the container with:

$ lxc exec bionic-maas bash

And you can proceed with the installation as above, :ref:`From a package repository. <pkg-install>`

Post-Install tasks

Your MAAS is now installed, but there are a few more things to be done. If you now use a web browser to connect to the region controller, you should see that MAAS is running, but there will also be some errors on the screen:

media/install_web-init.*

The on screen messages will tell you that there are no boot images present, and that you can't login because there is no admin user.

Create a superuser account

Once MAAS is installed, you'll need to create an administrator account:

$ sudo maas createadmin --username=root --email=MYEMAIL@EXAMPLE.COM

Substitute your own email address for MYEMAIL@EXAMPLE.COM. You may also use a different username for your administrator account, but "root" is a common convention and easy to remember. The command will prompt for a password to assign to the new user.

You can run this command again for any further administrator accounts you may wish to create, but you need at least one.

Log in on the server

Looking at the region controller's main web page again, you should now see a login screen. Log in using the user name and password which you have just created.

media/install-login.*

Import the boot images

Since version 1.7, MAAS stores the boot images in the region controller's database, from where the rack controllers will synchronise with the region and pull images from the region to the rack's local disk. This process is automatic and MAAS will check for and download new Ubuntu images every hour.

However, on a new installation you'll need to start the import process manually once you have set up your MAAS region controller. There are two ways to start the import: through the web user interface, or through the remote API.

To do it in the web user interface, go to the Images tab, check the boxes to say which images you want to import, and click the "Import images" button at the bottom of the Ubuntu section.

media/import-images.*

A message will appear to let you know that the import has started, and after a while, the warnings about the lack of boot images will disappear.

It may take a long time, depending on the speed of your Internet connection for import process to complete, as the images are several hundred megabytes. The import process will only download images that have changed since last import. You can check the progress of the import by hovering over the spinner next to each image.

The other way to start the import is through the :ref:`region-controller API <region-controller-api>`, which you can invoke most conveniently through the :ref:`command-line interface <cli>`.

To do this, connect to the MAAS API using the "maas" command-line client. See :ref:`Logging in <api-key>` for how to get set up with this tool. Then, run the command:

$ maas my-maas-session boot-resources import

(Substitute a different profile name for 'my-maas-session' if you have named yours something else.) This will initiate the download, just as if you had clicked "Import images" in the web user interface.

By default, the import is configured to download the most recent LTS release only for the amd64 architecture. Although this should suit most needs, you can change the selections on the Images tab, or over the API. Read :doc:`customise boot sources </bootsources>` to see examples on how to do that.

Speeding up repeated image imports by using a local mirror

See :doc:`sstreams-mirror` for information on how to set up a mirror and configure MAAS to use it.

Configure DHCP

To enable MAAS to control DHCP, you can either:

  1. Follow the instructions at :doc:`rack-configuration` to use the web UI to set up your rack controller.
  2. Use the command line interface maas by first :ref:`logging in to the API <api-key>` and then :ref:`following this procedure <cli-dhcp>`

Configure switches on the network

Some switches use Spanning-Tree Protocol (STP) to negotiate a loop-free path through a root bridge. While scanning, it can make each port wait up to 50 seconds before data is allowed to be sent on the port. This delay in turn can cause problems with some applications/protocols such as PXE, DHCP and DNS, of which MAAS makes extensive use.

To alleviate this problem, you should enable Portfast for Cisco switches or its equivalent on other vendor equipment, which enables the ports to come up almost immediately.

Traffic between the region contoller and rack controllers

  • Each rack controller must be able to:
    • Initiate TCP connections (for HTTP) to each region controller on port 80 or port 5240, the choice of which depends on the setting of the MAAS URL.
    • Initiate TCP connections (for RPC) to each region controller between port 5250 and 5259 inclusive. This permits up to 10 maas-regiond processes on each region controller host. At present this is not configurable.

Once everything is set up and running, you are ready to :doc:`start enlisting nodes <nodes>`