Skip to content

Latest commit

 

History

History
99 lines (69 loc) · 4 KB

README.md

File metadata and controls

99 lines (69 loc) · 4 KB

ChirpStack Docker example

This repository contains a skeleton to setup the ChirpStack open-source LoRaWAN Network Server (v4) using Docker Compose.

Note: Please use this docker-compose.yml file as a starting point for testing but keep in mind that for production usage it might need modifications.

Directory layout

  • docker-compose.yml: the docker-compose file containing the services
  • configuration/chirpstack: directory containing the ChirpStack configuration files
  • configuration/chirpstack-gateway-bridge: directory containing the ChirpStack Gateway Bridge configuration
  • configuration/mosquitto: directory containing the Mosquitto (MQTT broker) configuration
  • configuration/postgresql/initdb/: directory containing PostgreSQL initialization scripts

Configuration

This setup is pre-configured for all regions. You can either connect a ChirpStack Gateway Bridge instance (v3.14.0+) to the MQTT broker (port 1883) or connect a Semtech UDP Packet Forwarder. Please note that:

  • You must prefix the MQTT topic with the region. Please see the region configuration files in the configuration/chirpstack for a list of topic prefixes (e.g. eu868, us915_0, au915_0, as923_2, ...).
  • The protobuf marshaler is configured.

This setup also comes with two instances of the ChirpStack Gateway Bridge. One is configured to handle the Semtech UDP Packet Forwarder data (port 1700), the other is configured to handle the Basics Station protocol (port 3001). Both instances are by default configured for EU868 (using the eu868 MQTT topic prefix).

Reconfigure regions

ChirpStack has at least one configuration of each region enabled. You will find the list of enabled_regions in configuration/chirpstack/chirpstack.toml. Each entry in enabled_regions refers to the id that can be found in the region_XXX.toml file. This region_XXX.toml also contains a topic_prefix configuration which you need to configure the ChirpStack Gateway Bridge UDP instance (see below).

ChirpStack Gateway Bridge (UDP)

Within the docker-compose.yml file, you must replace the eu868 prefix in the INTEGRATION__..._TOPIC_TEMPLATE configuration with the MQTT topic_prefix of the region you would like to use (e.g. us915_0, au915_0, in865, ...).

ChirpStack Gateway Bridge (Basics Station)

Within the docker-compose.yml file, you must update the configuration file that the ChirpStack Gateway Bridge instance must used. The default is chirpstack-gateway-bridge-basicstation-eu868.toml. For available configuration files, please see the configuration/chirpstack-gateway-bridge directory.

Data persistence

PostgreSQL and Redis data is persisted in Docker volumes, see the docker-compose.yml volumes definition.

Requirements

Before using this docker-compose.yml file, make sure you have Docker installed.

Importing device repository

To import the lorawan-devices repository (optional step), run the following command:

make import-lorawan-devices

This will clone the lorawan-devices repository and execute the import command of ChirpStack. Please note that for this step you need to have the make command installed.

Note: an older snapshot of the lorawan-devices repository is cloned as the latest revision no longer contains a LICENSE file.

Usage

To start the ChirpStack simply run:

$ docker-compose up

After all the components have been initialized and started, you should be able to open http://localhost:8080/ in your browser.

The example includes the ChirpStack REST API. You should be able to access the UI by opening http://localhost:8090 in your browser.

Note: It is recommended to use the gRPC interface over the REST interface.