Skip to content

Latest commit

 

History

History
204 lines (143 loc) · 9.29 KB

podman-network-create.1.md

File metadata and controls

204 lines (143 loc) · 9.29 KB

% podman-network-create 1

NAME

podman-network-create - Create a Podman network

SYNOPSIS

podman network create [options] [name]

DESCRIPTION

Create a network configuration for use with Podman. By default, Podman creates a bridge connection. A Macvlan connection can be created with the -d macvlan option. A parent device for macvlan or ipvlan can be designated with the -o parent=<device> or --network-interface=<device> option.

If no options are provided, Podman assigns a free subnet and name for the network.

Upon completion of creating the network, Podman displays the name of the newly added network.

OPTIONS

--disable-dns

Disables the DNS plugin for this network which if enabled, can perform container to container name resolution. It is only supported with the bridge driver, for other drivers it is always disabled.

--dns=ip

Set network-scoped DNS resolver/nameserver for containers in this network. If not set, the host servers from /etc/resolv.conf is used. It can be overwritten on the container level with the podman run/create --dns option. This option can be specified multiple times to set more than one IP.

--driver, -d=driver

Driver to manage the network. Currently bridge, macvlan and ipvlan are supported. Defaults to bridge. As rootless the macvlan and ipvlan driver have no access to the host network interfaces because rootless networking requires a separate network namespace.

The netavark backend allows the use of so called netavark plugins, see the plugin-API.md documentation in netavark. The binary must be placed in a specified directory so podman can discover it, this list is set in netavark_plugin_dirs in containers.conf(5) under the [network] section.

The name of the plugin can then be used as driver to create a network for your plugin. The list of all supported drivers and plugins can be seen with podman info --format {{.Plugins.Network}}.

Note that the macvlan and ipvlan drivers do not support port forwarding. Support for port forwarding with a plugin depends on the implementation of the plugin.

--gateway=ip

Define a gateway for the subnet. To provide a gateway address, a subnet option is required. Can be specified multiple times. The argument order of the --subnet, --gateway and --ip-range options must match.

--ignore

Ignore the create request if a network with the same name already exists instead of failing. Note, trying to create a network with an existing name and different parameters does not change the configuration of the existing one.

--interface-name=name

This option maps the network_interface option in the network config, see podman network inspect. Depending on the driver, this can have different effects; for bridge, it uses the bridge interface name. For macvlan and ipvlan, it is the parent device on the host. It is the same as --opt parent=....

--internal

Restrict external access of this network when using a bridge network. Note when using the CNI backend DNS will be automatically disabled, see --disable-dns.

When using the macvlan or ipvlan driver with this option no default route will be added to the container. Because it bypasses the host network stack no additional restrictions can be set by podman and if a privileged container is run it can set a default route themselves. If this is a concern then the container connections should be blocked on your actual network gateway.

--ip-range=range

Allocate container IP from a range. The range must be a either a complete subnet in CIDR notation or be in the <startIP>-<endIP> syntax which allows for a more flexible range compared to the CIDR subnet. The ip-range option must be used with a subnet option. Can be specified multiple times. The argument order of the --subnet, --gateway and --ip-range options must match.

--ipam-driver=driver

Set the ipam driver (IP Address Management Driver) for the network. When unset podman chooses an ipam driver automatically based on the network driver.

Valid values are:

  • dhcp: IP addresses are assigned from a dhcp server on the network. When using the netavark backend the netavark-dhcp-proxy.socket must be enabled in order to start the dhcp-proxy when a container is started, for CNI use the cni-dhcp.socket unit instead.
  • host-local: IP addresses are assigned locally.
  • none: No ip addresses are assigned to the interfaces.

View the driver in the podman network inspect output under the ipam_options field.

--ipv6

Enable IPv6 (Dual Stack) networking. If no subnets are given, it allocates an ipv4 and an ipv6 subnet.

--label=label

Set metadata for a network (e.g., --label mykey=value).

--opt, -o=option

Set driver specific options.

All drivers accept the mtu, metric, no_default_route and options.

  • mtu: Sets the Maximum Transmission Unit (MTU) and takes an integer value.
  • metric Sets the Route Metric for the default route created in every container joined to this network. Accepts a positive integer value. Can only be used with the Netavark network backend.
  • no_default_route: If set to 1, Podman will not automatically add a default route to subnets. Routes can still be added manually by creating a custom route using --route.

Additionally the bridge driver supports the following options:

  • vlan: This option assign VLAN tag and enables vlan_filtering. Defaults to none.
  • isolate: This option isolates networks by blocking traffic between those that have this option enabled.
  • com.docker.network.bridge.name: This option assigns the given name to the created Linux Bridge
  • com.docker.network.driver.mtu: Sets the Maximum Transmission Unit (MTU) and takes an integer value.
  • vrf: This option assigns a VRF to the bridge interface. It accepts the name of the VRF and defaults to none. Can only be used with the Netavark network backend.

The macvlan and ipvlan driver support the following options:

  • parent: The host device which is used for the macvlan interface. Defaults to the default route interface.
  • mode: This option sets the specified ip/macvlan mode on the interface.
    • Supported values for macvlan are bridge, private, vepa, passthru. Defaults to bridge.
    • Supported values for ipvlan are l2, l3, l3s. Defaults to l2.

Additionally the macvlan driver supports the bclim option:

  • bclim: Set the threshold for broadcast queueing. Must be a 32 bit integer. Setting this value to -1 disables broadcast queueing altogether.

--route=route

A static route in the format <destination in CIDR notation>,<gateway>,<route metric (optional)>. This route will be added to every container in this network. Only available with the netavark backend. It can be specified multiple times if more than one static route is desired.

--subnet=subnet

The subnet in CIDR notation. Can be specified multiple times to allocate more than one subnet for this network. The argument order of the --subnet, --gateway and --ip-range options must match. This is useful to set a static ipv4 and ipv6 subnet.

EXAMPLE

Create a network with no options.

$ podman network create
podman2

Create a network named newnet that uses 192.5.0.0/16 for its subnet.

$ podman network create --subnet 192.5.0.0/16 newnet
newnet

Create an IPv6 network named newnetv6 with a subnet of 2001:db8::/64.

$ podman network create --subnet 2001:db8::/64 --ipv6 newnetv6
newnetv6

Create a network named newnet that uses 192.168.33.0/24 and defines a gateway as 192.168.133.3.

$ podman network create --subnet 192.168.33.0/24 --gateway 192.168.33.3 newnet
newnet

Create a network that uses a 192.168.55.0/24 subnet and has an IP address range of 192.168.55.129 - 192.168.55.254.

$ podman network create --subnet 192.168.55.0/24 --ip-range 192.168.55.128/25
podman5

Create a network with a static ipv4 and ipv6 subnet and set a gateway.

$ podman network create --subnet 192.168.55.0/24 --gateway 192.168.55.3 --subnet fd52:2a5a:747e:3acd::/64 --gateway fd52:2a5a:747e:3acd::10
podman4

Create a network with a static subnet and a static route.

$ podman network create --subnet 192.168.33.0/24 --route 10.1.0.0/24,192.168.33.10 newnet

Create a network with a static subnet and a static route without a default route.

$ podman network create --subnet 192.168.33.0/24 --route 10.1.0.0/24,192.168.33.10 --opt no_default_route=1 newnet

Create a Macvlan based network using the host interface eth0. Macvlan networks can only be used as root.

$ sudo podman network create -d macvlan -o parent=eth0 --subnet 192.5.0.0/16 newnet
newnet

SEE ALSO

podman(1), podman-network(1), podman-network-inspect(1), podman-network-ls(1), containers.conf(5)

HISTORY

August 2021, Updated with the new network format by Paul Holzinger pholzing@redhat.com

August 2019, Originally compiled by Brent Baude bbaude@redhat.com