Missing data from one of the JK BMS i'm using like SOC en Current #209
Comments
|
Same issue here, JK bms. Today suddenly I've lost balance current, capacity, soc, battery voltage and temperature 1 and 2. Other data work as usual. I had an old version, 0.something, I updated it to the newest but it still doesn't work. I tried to see the data from JK app and it is all OK, so I think it is a batmon app problem.
here my log: 20:54:57 INFO [sampling] battery volt=[3310,3311,3311,3311,3311,3311,3311,3311,3311,3313,3310,3314,3311,3310,3316,3313] temp=[0.0, 0.0] |
|
Same problem here, my logs are comparable. It seems that after a few months of running, perhaps a field becomes too large and causes an error in the protocol offsets. Using Bluetooth app everything looks fine, and using 4.2in Display everything looks fine so it undoubtedly is a BatMon issue. |
I tried uninstalling and reinstalling the add-on but I have the same problems. A few days ago I also lost two other sensors, cell voltage 18 and 19.. |
|
I have the same issue. I have 6 BMS linked up in a group. It's all been working fine but now soc etc aren't showing for one BMS. Everything else seems fine |
|
The same for me. Lost voltage and soc. Maybe something else, but these 2 a used in HA for automations. Did you find any way to fix it? |
|
Same here since a couple of days (JK B2A20S20P). |
|
Long story short, I ran out of space on my storage device so I had to rebuild on a bigger one. Also had to hard reset my BMS that wasn't showing figures, all up and running now
Sent from Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: boernhard ***@***.***>
Sent: Monday, April 22, 2024 2:19:58 PM
To: fl4p/batmon-ha ***@***.***>
Cc: esther1112 ***@***.***>; Comment ***@***.***>
Subject: Re: [fl4p/batmon-ha] Missing data from one of the JK BMS i'm using like SOC en Current (Issue #209)
same here since a couple of days (JK B2A20S20P)
—
Reply to this email directly, view it on GitHub<#209 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BGFS2SMF4DYBX2WNJEPBFQLY6UE75AVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRZGQYDCNJRGU>.
You are receiving this because you commented.Message ID: ***@***.***>
|
|
Thanks for this advice :) What exactly do you mean by "hard reset"? Switch off and on with physical switch? Or reset to factory values by app?
|
|
We had to reset through the jk app. Wrote down all the figures first as I have 6.
Sent from Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: boernhard ***@***.***>
Sent: Tuesday, April 23, 2024 9:56:01 AM
To: fl4p/batmon-ha ***@***.***>
Cc: esther1112 ***@***.***>; Comment ***@***.***>
Subject: Re: [fl4p/batmon-ha] Missing data from one of the JK BMS i'm using like SOC en Current (Issue #209)
Thanks for this advice :) What exactly do you mean by "hard reset"? Switch off and on with physical switch? Or reset to factory values by app?
Long story short, I ran out of space on my storage device so I had to rebuild on a bigger one. Also had to hard reset my BMS that wasn't showing figures, all up and running now Sent from Outlook for Androidhttps://aka.ms/AAb9ysg
…
—
Reply to this email directly, view it on GitHub<#209 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BGFS2SP3X64EA3D4NPARGHDY6YO2DAVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZRG43TEMRWGA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
sorry but I didn't understand. In which way you reset through the jk app? I don't see any way to do it.. maybe uninstall and reinstall it? |
|
On the jk bms app you can reset the BMS to it's original settings.
Sent from Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: donulf ***@***.***>
Sent: Tuesday, April 23, 2024 8:38:59 PM
To: fl4p/batmon-ha ***@***.***>
Cc: esther1112 ***@***.***>; Comment ***@***.***>
Subject: Re: [fl4p/batmon-ha] Missing data from one of the JK BMS i'm using like SOC en Current (Issue #209)
We had to reset through the jk app. Wrote down all the figures first as I have 6.
sorry but I didn't understand. In which way you reset through the jk app? I don't see any way to do it.. maybe uninstall and reinstall it?
—
Reply to this email directly, view it on GitHub<#209 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BGFS2SPOLCMPJCQMMYWL2OLY622FHAVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZTGI4DMMRRGE>.
You are receiving this because you commented.Message ID: ***@***.***>
|
sorry but I can't find nothing similar to a "reset button" in the jk bms app. The only way you can do something similar to a reset is to press on one of the three presets in the main page. However the counter shows the original time, so it isn't a "real" reset... you do it in that way? or maybe you find another way to do it?
|
|
Pressed the lifepo4 button as that's the batteries we have. Will reset all the number to what they were originally. Did that re entered all the numbers to our settings and it started working again properly. That's the way we did it.
Sent from Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: donulf ***@***.***>
Sent: Tuesday, April 23, 2024 9:59:33 PM
To: fl4p/batmon-ha ***@***.***>
Cc: esther1112 ***@***.***>; Comment ***@***.***>
Subject: Re: [fl4p/batmon-ha] Missing data from one of the JK BMS i'm using like SOC en Current (Issue #209)
On the jk bms app you can reset the BMS to it's original setting
sorry but I can't find nothing similar to a "reset button" in the jk bms app. The only way you can do something similar to a reset is to press on one of the three presets in the main page. However the counter shows the original time, so it isn't a "real" reset... you do it in that way? or maybe you find another way to do it?
1.jpg (view on web)<https://github.com/fl4p/batmon-ha/assets/143497112/8f8c7f62-a3da-4278-aace-d94e1fa67635>
—
Reply to this email directly, view it on GitHub<#209 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BGFS2SKBBMV6LBHNNO5ZWH3Y63DTLAVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZTGQZTIMBZGQ>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Thank you very much, I'll try it! |
I tried, it worked for 12 hours and again went down :-(
|
|
How much memory do u have on Ur storage device IE SD card
Sent from Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: donulf ***@***.***>
Sent: Friday, April 26, 2024 8:01:49 AM
To: fl4p/batmon-ha ***@***.***>
Cc: esther1112 ***@***.***>; Comment ***@***.***>
Subject: Re: [fl4p/batmon-ha] Missing data from one of the JK BMS i'm using like SOC en Current (Issue #209)
Pressed the lifepo4 button as that's the batteries we have. Will reset all the number to what they were originally. Did that re entered all the numbers to our settings and it started working again properly. That's the way we did it.
Thank you very much, I'll try it!
I tried, it worked for 12 hours and again went down :-(
333.JPG (view on web)<https://github.com/fl4p/batmon-ha/assets/143497112/65a87bdd-c004-4309-939b-1fbed2030950>
—
Reply to this email directly, view it on GitHub<#209 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BGFS2SLTEEH3G5LJPFGKZB3Y7H3V3AVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZYG42TGMRTGM>.
You are receiving this because you commented.Message ID: ***@***.***>
|
I have 28GB free on the internal SSD, and this is the CPU and RAM usage. I don't think is a memory issue.. |
|
Ah ok. I'm afraid I don't know of any other fixes
Sent from Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: donulf ***@***.***>
Sent: Friday, April 26, 2024 8:11:45 AM
To: fl4p/batmon-ha ***@***.***>
Cc: esther1112 ***@***.***>; Comment ***@***.***>
Subject: Re: [fl4p/batmon-ha] Missing data from one of the JK BMS i'm using like SOC en Current (Issue #209)
How much memory do u have on Ur storage device IE SD card
I have 28GB free on the internal SSD, and this is the CPU and RAM usage. I don't think is a memory issue..
333.JPG (view on web)<https://github.com/fl4p/batmon-ha/assets/143497112/32837f2e-c6c9-4d1e-9121-cb31c3f82839>
—
Reply to this email directly, view it on GitHub<#209 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BGFS2SL55ZNKSS5BHO6I6J3Y7H43DAVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZYG43DQOJQGQ>.
You are receiving this because you commented.Message ID: ***@***.***>
|
|
thank you anyway. Maybe some day @fl4p will read this and he will want to help.. |
|
I gave up and moved over to ESPHome to replace Batmon
…On Fri, Apr 26, 2024 at 3:20 PM donulf ***@***.***> wrote:
thank you anyway. Maybe some day @fl4p <https://github.com/fl4p> will
read this and he will want to help..
—
Reply to this email directly, view it on GitHub
<#209 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AA6VBYFRZPK6PTIKFVCL633Y7H54DAVCNFSM6AAAAABEOC44VSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZYG44DCMRRHA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
Is the dev still around and reading these comments, taking care of the many issues? |
Batmon version: 1.78
Accu bank 1
JK:BMS: JK_B2A20S20P
Firmware: 11.25
Hardware: 11.X
Accu bank 2
JK BMS: JK_B2A20S20P
Firmware: 11.261
Hardware: 11.XW
Since a couple of weeks I'm missing some data from my second BMS (Accu bank 2) as you cab see also in the logs. SOC en current for example is not shown anymore.
13:43:53 INFO [sampling] Accu bank 1: BmsSampl(80.1%,U=55.1V,I=63.25A,P=3485W,Q=208/260Ah,mos=29°C)
13:43:53 INFO [sampling] Accu bank 1 volt=[3471,3436,3452,3436,3449,3435,3447,3440,3451,3429,3451,3450,3439,3444,3442,3432] temp=[21.6, 16.75, 0.0, 0.0]
13:44:51 INFO [sampling] Accu bank 2: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,Q=21430/0Ah,mos=0°C)
13:44:51 INFO [sampling] Accu bank 2 volt=[3416,3416,3412,3415,3416,3417,3415,3406,3412,3418,3418,3406,3421,3410,3412,3415] temp=[0.0, 0.0]
When i connect to the BMS with the Androind JK App, everything seems to be fine.
Below the verbose logging
PLEASE HELP!!
Paste log output between BEGIN and END:
BEGIN
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1528), 'b'Accu_bank_1/switch/balance'', ... (2 bytes)
13:52:21 INFO [sampling] Accu bank 1: BmsSampl(83.5%,U=55.1V,I=62.82A,P=3463W,Q=217/260Ah,mos=29°C)
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1529), 'b'Accu_bank_1/cell_voltages/1'', ... (5 bytes)
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/2 data not changed
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1530), 'b'Accu_bank_1/cell_voltages/3'', ... (5 bytes)
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1531), 'b'Accu_bank_1/cell_voltages/4'', ... (5 bytes)
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1532), 'b'Accu_bank_1/cell_voltages/5'', ... (4 bytes)
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/6 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/7 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/8 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/9 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/10 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/11 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/12 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/13 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/14 data not changed
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1533), 'b'Accu_bank_1/cell_voltages/15'', ... (5 bytes)
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/16 data not changed
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/min data not changed
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1534), 'b'Accu_bank_1/cell_voltages/min_index'', ... (2 bytes)
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1535), 'b'Accu_bank_1/cell_voltages/max'', ... (5 bytes)
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1536), 'b'Accu_bank_1/cell_voltages/max_index'', ... (1 bytes)
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1537), 'b'Accu_bank_1/cell_voltages/delta'', ... (5 bytes)
13:52:21 DEBUG [mqtt_util] topic Accu_bank_1/cell_voltages/average data not changed
13:52:21 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1538), 'b'Accu_bank_1/cell_voltages/median'', ... (6 bytes)
13:52:21 INFO [sampling] Accu bank 1 volt=[3474,3437,3455,3437,3450,3436,3450,3440,3452,3427,3454,3451,3440,3446,3445,3432] temp=[21.75, 16.8, 0.0, 0.0]
13:52:21 INFO [sampling] JKBt(C8:47:8C:EC:56:E2,Accu bank 1) times: connect=0.00s fetch=0.17s
13:52:21 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_10_13_B8/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'U\xaa\xeb\x90\x02\xb5X\rY\rX\rY\r\\r]\rX\rO\rW\r\\r]\rQ\r_\rT\rV\rY\r\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\x00\x00X\r\x0f\x00\n\x079\x00:\x007\x007\x006\x006\x005\x006\x005\x005\x004\x005\x006\x006\x004\x004\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')>}, []]
13:52:21 DEBUG [jikong] header, clear buf bytearray(b'')
13:52:21 DEBUG [jikong] bms msg(128) (buf128): 55 aa eb 90 2 b5 58 d 59 d 58 d 59 d 5c d 5d d 58 d 4f d 57 d 5c d 5d d 51 d 5f d 54 d 56 d 59 d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ff ff 0 0 58 d f 0 a 7 39 0 3a 0 37 0 37 0 36 0 36 0 35 0 36 0 35 0 35 0 34 0 35 0 36 0 36 0 34 0 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_10_13_B8/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00J\x01\x00\x00\x00\x00')>}, []]
13:52:22 DEBUG [jikong] bms msg(22) (buf150): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4a 1 0 0 0 0
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_10_13_B8/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'\x85\xd5\x00\x00\x13s5\x00S\xfa\x00\x00\xdb\x00\xbb\x00\x00\x00\x00\x00F\xf8\x02M\x02\x93\x03\x00\xb0\x9b\x04\x00:\x00\x00\x007\x8a\r\x01d\x00\x00\x00\x1cF\x03\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xff\x00\x01\x00\x00\x00\x1e\x040\x01\x00\x00\x080?@p\x00\x00\x00Z\x15n\x1b\x00\x01\x00\x01\x00\x05\x00\x00\x1f\xbd \n\x00\x00\x00\x00J\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')>}, []]
13:52:22 DEBUG [jikong] bms msg(128) (buf278): 85 d5 0 0 13 73 35 0 53 fa 0 0 db 0 bb 0 0 0 0 0 46 f8 2 4d 2 93 3 0 b0 9b 4 0 3a 0 0 0 37 8a d 1 64 0 0 0 1c 46 3 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ff 0 1 0 0 0 1e 4 30 1 0 0 8 30 3f 40 70 0 0 0 5a 15 6e 1b 0 1 0 1 0 5 0 0 1f bd 20 a 0 0 0 0 4a 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_10_13_B8/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfe\xff\x7f\xdc\x0f\x01\x00\x00\x00\x00\x00\x00&')>}, []]
13:52:22 DEBUG [jikong] bms msg(22) (buf300): 0 0 0 0 0 0 0 0 0 fe ff 7f dc f 1 0 0 0 0 0 0 26
13:52:22 DEBUG [jikong] got response 2 (len300)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/soc/total_voltage data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/soc/current data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/soc/balance_current data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/soc/soc_percent data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/soc/power data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/soc/capacity data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1539), 'b'Accu_bank_2/soc/cycle_capacity'', ... (6 bytes)
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1540), 'b'Accu_bank_2/soc/num_cycles'', ... (5 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/mosfet_status/capacity_ah data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/mosfet_status/temperature data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/bms/uptime data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1541), 'b'Accu_bank_2/meter/sample_count'', ... (2 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/switch/charge data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/switch/discharge data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/switch/balance data not changed
13:52:22 INFO [sampling] Accu bank 2: BmsSampl(0.0%,U=0.0V,I=0.00A,P=0W,Q=21627/0Ah,mos=0°C)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/1 data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/2 data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1542), 'b'Accu_bank_2/cell_voltages/3'', ... (5 bytes)
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1543), 'b'Accu_bank_2/cell_voltages/4'', ... (5 bytes)
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1544), 'b'Accu_bank_2/cell_voltages/5'', ... (4 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/6 data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1545), 'b'Accu_bank_2/cell_voltages/7'', ... (5 bytes)
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1546), 'b'Accu_bank_2/cell_voltages/8'', ... (5 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/9 data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1547), 'b'Accu_bank_2/cell_voltages/10'', ... (4 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/11 data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1548), 'b'Accu_bank_2/cell_voltages/12'', ... (5 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/13 data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1549), 'b'Accu_bank_2/cell_voltages/14'', ... (5 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/15 data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/16 data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/min data not changed
13:52:22 DEBUG [client] Sending PUBLISH (d0, q0, r0, m1550), 'b'Accu_bank_2/cell_voltages/min_index'', ... (1 bytes)
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/max data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/max_index data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/delta data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/average data not changed
13:52:22 DEBUG [mqtt_util] topic Accu_bank_2/cell_voltages/median data not changed
13:52:22 INFO [sampling] Accu bank 2 volt=[3416,3417,3416,3417,3420,3421,3416,3407,3415,3420,3421,3409,3423,3412,3414,3417] temp=[0.0, 0.0]
13:52:22 INFO [sampling] JKBt(C8:47:8C:10:13:B8,Accu bank 2) times: connect=0.00s fetch=0.16s
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_EC_56_E2/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'U\xaa\xeb\x90\x02\x9a\x90\rm\r\x7f\rm\rz\rl\rz\rp\r|\rc\r~\r{\rp\rv\ru\rh\r\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\x00\x00u\r/\x00\x00\t4\x004\x003\x003\x003\x003\x003\x004\x002\x003\x004\x004\x003\x004\x004\x005\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')>}, []]
13:52:22 DEBUG [jikong] header, clear buf bytearray(b'')
13:52:22 DEBUG [jikong] bms msg(128) (buf128): 55 aa eb 90 2 9a 90 d 6d d 7f d 6d d 7a d 6c d 7a d 70 d 7c d 63 d 7e d 7b d 70 d 76 d 75 d 68 d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ff ff 0 0 75 d 2f 0 0 9 34 0 34 0 33 0 33 0 33 0 33 0 33 0 34 0 32 0 33 0 34 0 34 0 33 0 34 0 34 0 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_EC_56_E2/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00$\x01\x00\x00\x00\x00')>}, []]
13:52:22 DEBUG [jikong] bms msg(22) (buf150): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 24 1 0 0 0 0
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_EC_56_E2/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b"V\xd7\x00\x00\xc2\xee4\x00(\xf4\x00\x00\xda\x00\xa8\x00\x00\x00\x00\x00\t\xf8\x02S\xf4O\x03\x00!\xf7\x03\x004\x00\x00\x00\x99\xf3\xce\x00V\x00\x00\x00i\x11\x9b\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xff\x00\x01\x00\x00\x00'\x04&\x01\x00\x00\xf2AC@\x00\x00\x00\x00\x88\x15\x8a\x0c\x00\x01\x00\x01\x00\x05\x00\x00\x82\xc2\xc6\x04\x00\x00\x00\x00$\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00")>}, []]
13:52:22 DEBUG [jikong] bms msg(128) (buf278): 56 d7 0 0 c2 ee 34 0 28 f4 0 0 da 0 a8 0 0 0 0 0 9 f8 2 53 f4 4f 3 0 21 f7 3 0 34 0 0 0 99 f3 ce 0 56 0 0 0 69 11 9b 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ff 0 1 0 0 0 27 4 26 1 0 0 f2 41 43 40 0 0 0 0 88 15 8a c 0 1 0 1 0 5 0 0 82 c2 c6 4 0 0 0 0 24 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_EC_56_E2/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfe\xff\x7f\xdc\x0f\x01\x00\x00\x00\x00\x00\x00\x8e')>}, []]
13:52:22 DEBUG [jikong] bms msg(22) (buf300): 0 0 0 0 0 0 0 0 0 fe ff 7f dc f 1 0 0 0 0 0 0 8e
13:52:22 DEBUG [jikong] got response 2 (len300)
13:52:22 DEBUG [client] received D-Bus signal: org.freedesktop.DBus.Properties.PropertiesChanged (/org/bluez/hci0/dev_C8_47_8C_10_13_B8/service000e/char0011): ['org.bluez.GattCharacteristic1', {'Value': <dbus_next.signature.Variant ('ay', b'U\xaa\xeb\x90\x02\xb6X\rY\rX\rY\r\\r]\rX\rO\rW\r\\r]\rQ\r_\rT\rV\rY\r\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\x00\x00X\r\x0f\x00\n\x079\x00:\x007\x007\x006\x006\x005\x006\x005\x005\x004\x005\x006\x006\x004\x004\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')>}, []]
13:52:22 DEBUG [jikong] header, clear buf bytearray(b'')
13:52:22 DEBUG [jikong] bms msg(128) (buf128): 55 aa eb 90 2 b6 58 d 59 d 58 d 59 d 5c d 5d d 58 d 4f d 57 d 5c d 5d d 51 d 5f d 54 d 56 d 59 d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ff ff 0 0 58 d f 0 a 7 39 0 3a 0 37 0 37 0 36 0 36 0 35 0 36 0 35 0 35 0 34 0 35 0 36 0 36 0 34 0 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
END
The text was updated successfully, but these errors were encountered: