Settings.js

/**
 * The copyright in this software is being made available under the BSD License,
 * included below. This software may be subject to other third party and contributor
 * rights, including patent rights, and no such rights are granted under this license.
 *
 * Copyright (c) 2013, Dash Industry Forum.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *  * Redistributions of source code must retain the above copyright notice, this
 *  list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright notice,
 *  this list of conditions and the following disclaimer in the documentation and/or
 *  other materials provided with the distribution.
 *  * Neither the name of Dash Industry Forum nor the names of its
 *  contributors may be used to endorse or promote products derived from this software
 *  without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY
 *  EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 *  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 *  IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
 *  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 *  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 */
import FactoryMaker from './FactoryMaker';
import Utils from './Utils.js';
import Debug from '../core/Debug';
import Constants from '../streaming/constants/Constants';
import {HTTPRequest} from '../streaming/vo/metrics/HTTPRequest';

/** @module Settings
 * @description Define the configuration parameters of Dash.js MediaPlayer.
 * @see {@link module:Settings~PlayerSettings PlayerSettings} for further information about the supported configuration properties
 */


/**
 * @typedef {Object} PlayerSettings
 * @property {module:Settings~DebugSettings} [debug] Debug related settings
 * @property {module:Settings~StreamingSettings} [streaming] Streaming related settings
 * @example
 *
 * // Full settings object
 * settings = {
 *      debug: {
 *          logLevel: Debug.LOG_LEVEL_WARNING
 *      },
 *      streaming: {
 *          metricsMaxListDepth: 1000,
 *          abandonLoadTimeout: 10000,
 *          liveDelayFragmentCount: NaN,
 *          liveDelay: null,
 *          scheduleWhilePaused: true,
 *          fastSwitchEnabled: false,
 *          bufferPruningInterval: 10,
 *          bufferToKeep: 20,
 *          bufferAheadToKeep: 80,
 *          jumpGaps: true,
 *          smallGapLimit: 1.5,
 *          stableBufferTime: 12,
 *          bufferTimeAtTopQuality: 30,
 *          bufferTimeAtTopQualityLongForm: 60,
 *          longFormContentDurationThreshold: 600,
 *          wallclockTimeUpdateInterval: 50,
 *          lowLatencyEnabled: false,
 *          keepProtectionMediaKeys: false,
 *          useManifestDateHeaderTimeSource: true,
 *          useSuggestedPresentationDelay: true,
 *          useAppendWindowEnd: true,
 *          manifestUpdateRetryInterval: 100,
 *          liveCatchUpMinDrift: 0.02,
 *          liveCatchUpMaxDrift: 0,
 *          liveCatchUpPlaybackRate: 0.5,
 *          lastBitrateCachingInfo: { enabled: true, ttl: 360000 },
 *          lastMediaSettingsCachingInfo: { enabled: true, ttl: 360000 },
 *          cacheLoadThresholds: { video: 50, audio: 5 },
 *          retryIntervals: {
 *              MPD: 500,
 *              XLinkExpansion: 500,
 *              InitializationSegment: 1000,
 *              IndexSegment: 1000,
 *              MediaSegment: 1000,
 *              BitstreamSwitchingSegment: 1000,
 *              other: 1000,
 *              lowLatencyReductionFactor: 10
 *          },
 *          retryAttempts: {
 *              MPD: 3,
 *              XLinkExpansion: 1,
 *              InitializationSegment: 3,
 *              IndexSegment: 3,
 *              MediaSegment: 3,
 *              BitstreamSwitchingSegment: 3,
 *              other: 3,
 *              lowLatencyMultiplyFactor: 5
 *          },
 *          abr: {
 *              movingAverageMethod: Constants.MOVING_AVERAGE_SLIDING_WINDOW,
 *              ABRStrategy: Constants.ABR_STRATEGY_DYNAMIC,
 *              bandwidthSafetyFactor: 0.9,
 *              useDefaultABRRules: true,
 *              useBufferOccupancyABR: false,
 *              useDeadTimeLatency: true,
 *              limitBitrateByPortal: false,
 *              usePixelRatioInLimitBitrateByPortal: false,
 *              maxBitrate: { audio: -1, video: -1 },
 *              minBitrate: { audio: -1, video: -1 },
 *              maxRepresentationRatio: { audio: 1, video: 1 },
 *              initialBitrate: { audio: -1, video: -1 },
 *              initialRepresentationRatio: { audio: -1, video: -1 },
 *              autoSwitchBitrate: { audio: true, video: true }
 *          },
 *          cmcd: {
 *              enabled: false,
 *              sid: null,
 *              cid: null,
 *              did: null
 *          }
 *      }
 * }
 */


/**
 * @typedef {Object} DebugSettings
 * @property {number} [logLevel=dashjs.Debug.LOG_LEVEL_WARNING]
 * Sets up the log level. The levels are cumulative. For example, if you set the log level
 * to dashjs.Debug.LOG_LEVEL_WARNING all warnings, errors and fatals will be logged. Possible values.
 *
 * <ul>
 * <li>dashjs.Debug.LOG_LEVEL_NONE<br/>
 * No message is written in the browser console.
 *
 * <li>dashjs.Debug.LOG_LEVEL_FATAL<br/>
 * Log fatal errors. An error is considered fatal when it causes playback to fail completely.
 *
 * <li>dashjs.Debug.LOG_LEVEL_ERROR<br/>
 * Log error messages.
 *
 * <li>dashjs.Debug.LOG_LEVEL_WARNING<br/>
 * Log warning messages.
 *
 * <li>dashjs.Debug.LOG_LEVEL_INFO<br/>
 * Log info messages.
 *
 * <li>dashjs.Debug.LOG_LEVEL_DEBUG<br/>
 * Log debug messages.
 * </ul>
 */

/**
 * @typedef {Object} AbrSettings
 * @property {string} [movingAverageMethod="slidingWindow"]
 * Sets the moving average method used for smoothing throughput estimates. Valid methods are
 * "slidingWindow" and "ewma". The call has no effect if an invalid method is passed.
 *
 * The sliding window moving average method computes the average throughput using the last four segments downloaded.
 * If the stream is live (as opposed to VOD), then only the last three segments are used.
 * If wide variations in throughput are detected, the number of segments can be dynamically increased to avoid oscillations.
 *
 * The exponentially weighted moving average (EWMA) method computes the average using exponential smoothing.
 * Two separate estimates are maintained, a fast one with a three-second half life and a slow one with an eight-second half life.
 * The throughput estimate at any time is the minimum of the fast and slow estimates.
 * This allows a fast reaction to a bandwidth drop and prevents oscillations on bandwidth spikes.
 * @property {string} [ABRStrategy="abrDynamic"] Returns the current ABR strategy being used: "abrDynamic", "abrBola" or "abrThroughput".
 * @property {number} [bandwidthSafetyFactor=0.9]
 * Standard ABR throughput rules multiply the throughput by this value. It should be between 0 and 1,
 * with lower values giving less rebuffering (but also lower quality).
 * @property {boolean} [useDefaultABRRules=true] Should the default ABR rules be used, or the custom ones added.
 * @property {boolean} [useBufferOccupancyABR=false] Whether to use the BOLA abr rule.
 * @property {boolean} [useDeadTimeLatency=true]
 * If true, only the download portion will be considered part of the download bitrate
 * and latency will be regarded as static. If false, the reciprocal of the whole
 * transfer time will be used.
 * @property {boolean} [limitBitrateByPortal=false] If true, the size of the video portal will limit the max chosen video resolution.
 * @property {boolean} [usePixelRatioInLimitBitrateByPortal=false]
 * Sets whether to take into account the device's pixel ratio when defining the portal dimensions.
 * Useful on, for example, retina displays.
 * @property {module:Settings~AudioVideoSettings} [maxBitrate={audio: -1, video: -1}] The maximum bitrate that the ABR algorithms will choose. Use NaN for no limit.
 * @property {module:Settings~AudioVideoSettings} [minBitrate={audio: -1, video: -1}] The minimum bitrate that the ABR algorithms will choose. Use NaN for no limit.
 * @property {module:Settings~AudioVideoSettings} [maxRepresentationRatio={audio: 1, video: 1}]
 * When switching multi-bitrate content (auto or manual mode) this property specifies the maximum representation allowed,
 * as a proportion of the size of the representation set.
 *
 * You can set or remove this cap at anytime before or during playback. To clear this setting you set the value to 1.
 *
 * If both this and maxAllowedBitrate are defined, maxAllowedBitrate is evaluated first, then maxAllowedRepresentation,
 * i.e. the lowest value from executing these rules is used.
 *
 * This feature is typically used to reserve higher representations for playback only when connected over a fast connection.
 * @property {module:Settings~AudioVideoSettings} [initialBitrate={audio: -1, video: -1}] Explicitly set the starting bitrate for audio or video
 * @property {module:Settings~AudioVideoSettings} [initialRepresentationRatio={audio: -1, video: -1}] Explicitly set the initial representation ratio. If initalBitrate is specified, this is ignored.
 * @property {module:Settings~AudioVideoSettings} [autoSwitchBitrate={audio: true, video: true}] Indicates whether the player should enable ABR algorithms to switch the bitrate.
 */

/**
 * @typedef {Object} StreamingSettings
 * @property {number} [metricsMaxListDepth=1000] Maximum list depth of metrics.
 * @property {number} [abandonLoadTimeout=10000]
 * A timeout value in seconds, which during the ABRController will block switch-up events.
 * This will only take effect after an abandoned fragment event occurs.
 * @property {number} [liveDelayFragmentCount=NaN]
 * Changing this value will lower or increase live stream latency.  The detected segment duration will be multiplied by this value
 * to define a time in seconds to delay a live stream from the live edge. Lowering this value will lower latency but may decrease
 * the player's ability to build a stable buffer.
 * @property {number} [liveDelay]
 * <p>Equivalent in seconds of setLiveDelayFragmentCount</p>
 * <p>Lowering this value will lower latency but may decrease the player's ability to build a stable buffer.</p>
 * <p>This value should be less than the manifest duration by a couple of segment durations to avoid playback issues</p>
 * <p>If set, this parameter will take precedence over setLiveDelayFragmentCount and manifest info</p>
 * @property {boolean} [scheduleWhilePaused=true]
 * Set to true if you would like dash.js to keep downloading fragments in the background
 * when the video element is paused.
 * @property {boolean} [fastSwitchEnabled=false]
 * When enabled, after an ABR up-switch in quality, instead of requesting and appending the next fragment
 * at the end of the current buffer range it is requested and appended closer to the current time
 * When enabled, The maximum time to render a higher quality is current time + (1.5 * fragment duration).
 *
 * Note, When ABR down-switch is detected, we appended the lower quality at the end of the buffer range to preserve the
 * higher quality media for as long as possible.
 *
 * If enabled, it should be noted there are a few cases when the client will not replace inside buffer range but rather
 * just append at the end.  1. When the buffer level is less than one fragment duration 2.  The client
 * is in an Abandonment State due to recent fragment abandonment event.
 *
 * Known issues:
 * 1. In IE11 with auto switching off, if a user switches to a quality they can not download in time the
 * fragment may be appended in the same range as the playhead or even in the past, in IE11 it may cause a stutter
 * or stall in playback.
 * @property {number} [bufferPruningInterval=10] The interval of pruning buffer in sconds.
 * @property {number} [bufferToKeep=20]
 * This value influences the buffer pruning logic.
 * Allows you to modify the buffer that is kept in source buffer in seconds.
 *  0|-----------bufferToPrune-----------|-----bufferToKeep-----|currentTime|
 * @property {number} [bufferAheadToKeep=80]
 * This value influences the buffer pruning logic.
 * Allows you to modify the buffer ahead of current time position that is kept in source buffer in seconds.
 * <pre>0|--------|currentTime|-----bufferAheadToKeep----|----bufferToPrune-----------|end|</pre>
 * @property {boolean} [jumpGaps=true] Sets whether player should jump small gaps (discontinuities) in the buffer.
 * @property {number} [smallGapLimit=1.8] Time in seconds for a gap to be considered small.
 * @property {number} [stableBufferTime=12]
 * The time that the internal buffer target will be set to post startup/seeks (NOT top quality).
 *
 * When the time is set higher than the default you will have to wait longer
 * to see automatic bitrate switches but will have a larger buffer which
 * will increase stability.
 * @property {number} [bufferTimeAtTopQuality=30]
 * The time that the internal buffer target will be set to once playing the top quality.
 * If there are multiple bitrates in your adaptation, and the media is playing at the highest
 * bitrate, then we try to build a larger buffer at the top quality to increase stability
 * and to maintain media quality.
 * @property {number} [bufferTimeAtTopQualityLongForm=60] The time that the internal buffer target will be set to once playing the top quality for long form content.
 * @property {number} [longFormContentDurationThreshold=600]
 * The threshold which defines if the media is considered long form content.
 * This will directly affect the buffer targets when playing back at the top quality.
 * @property {number} [wallclockTimeUpdateInterval=50] How frequently the wallclockTimeUpdated internal event is triggered (in milliseconds).
 * @property {boolean} [lowLatencyEnabled=false] Enable or disable low latency mode
 * @property {boolean} [keepProtectionMediaKeys=false]
 * Set the value for the ProtectionController and MediaKeys life cycle. If true, the
 * ProtectionController and then created MediaKeys and MediaKeySessions will be preserved during
 * the MediaPlayer lifetime.
 * @property {boolean} [useManifestDateHeaderTimeSource=true]
 * <p>Allows you to enable the use of the Date Header, if exposed with CORS, as a timing source for live edge detection. The
 * use of the date header will happen only after the other timing source that take precedence fail or are omitted as described.
 * @property {boolean} [useSuggestedPresentationDelay=true]
 * <p>Set to true if you would like to override the default live delay and honor the SuggestedPresentationDelay attribute in by the manifest.</p>
 * @property {boolean} [useAppendWindowEnd=true]
 * Specifies if the appendWindowEnd attribute of the MSE SourceBuffers should be set according to content duration from manifest.
 * @property {number} [manifestUpdateRetryInterval=100]
 * For live streams, set the interval-frequency in milliseconds at which
 * dash.js will check if the current manifest is still processed before
 * downloading the next manifest once the minimumUpdatePeriod time has
 * @property {number} [liveCatchUpMinDrift=0.02]
 * Use this method to set the minimum latency deviation allowed before activating catch-up mechanism. In low latency mode,
 * when the difference between the measured latency and the target one,
 * as an absolute number, is higher than the one sets with this method, then dash.js increases/decreases
 * playback rate until target latency is reached.
 *
 * LowLatencyMinDrift should be provided in seconds, and it uses values between 0.0 and 0.5.
 *
 * Note: Catch-up mechanism is only applied when playing low latency live streams.
 * @property {number} [liveCatchUpMaxDrift=0]
 * Use this method to set the maximum latency deviation allowed before dash.js to do a seeking to live position. In low latency mode,
 * when the difference between the measured latency and the target one,
 * as an absolute number, is higher than the one sets with this method, then dash.js does a seek to live edge position minus
 * the target live delay.
 *
 * LowLatencyMaxDriftBeforeSeeking should be provided in seconds. If 0, then seeking operations won't be used for
 * fixing latency deviations.
 *
 * Note: Catch-up mechanism is only applied when playing low latency live streams.
 * @property {number} [liveCatchUpPlaybackRate=0.5]
 * Use this method to set the maximum catch up rate, as a percentage, for low latency live streams. In low latency mode,
 * when measured latency is higher/lower than the target one,
 * dash.js increases/decreases playback rate respectively up to (+/-) the percentage defined with this method until target is reached.
 *
 * Valid values for catch up rate are in range 0-0.5 (0-50%). Set it to 0 to turn off live catch up feature.
 *
 * Note: Catch-up mechanism is only applied when playing low latency live streams.
 * @property {module:Settings~CachingInfoSettings} [lastBitrateCachingInfo={enabled: true, ttl: 360000}]
 * Set to false if you would like to disable the last known bit rate from being stored during playback and used
 * to set the initial bit rate for subsequent playback within the expiration window.
 *
 * The default expiration is one hour, defined in milliseconds. If expired, the default initial bit rate (closest to 1000 kbps) will be used
 * for that session and a new bit rate will be stored during that session.
 * @property {module:Settings~CachingInfoSettings} [lastMediaSettingsCachingInfo={enabled: true, ttl: 360000}]
 * Set to false if you would like to disable the last known lang for audio (or camera angle for video) from being stored during playback and used
 * to set the initial settings for subsequent playback within the expiration window.
 *
 * The default expiration is one hour, defined in milliseconds. If expired, the default settings will be used
 * for that session and a new settings will be stored during that session.
 * @property {module:Settings~AudioVideoSettings} [cacheLoadThresholds={video: 50, audio: 5}]
 * For a given media type, the threshold which defines if the response to a fragment
 * request is coming from browser cache or not.
 * @property {module:Settings~RequestTypeSettings} [retryIntervals] Time in milliseconds of which to reload a failed file load attempt. For low latency mode these values are divided by lowLatencyReductionFactor.
 * @property {module:Settings~RequestTypeSettings} [retryAttempts] Total number of retry attempts that will occur on a file load before it fails. For low latency mode these values are multiplied by lowLatencyMultiplyFactor.
 * @property {module:Settings~AbrSettings} abr Adaptive Bitrate algorithm related settings.
 * @property {module:Settings~CmcdSettings} cmcd  Settings related to Common Media Client Data reporting.
 */

/**
 * @typedef {Object} CachingInfoSettings
 * @property {boolean} [enable] Enable or disable the caching feature.
 * @property {number} [ttl] Time to live. A value defined in milliseconds representing how log to cache the settings for.
 */

/**
 * @typedef {Object} module:Settings~AudioVideoSettings
 * @property {number|boolean} [audio] Configuration for audio media type of tracks.
 * @property {number|boolean} [video] Configuration for video media type of tracks.
 */

/**
 * @typedef {Object} RequestTypeSettings
 * @property {number} [MPD] Manifest type of requests
 * @property {number} [XLinkExpansion] XLink expansion type of requests
 * @property {number} [InitializationSegment] Request to retrieve an initialization segment
 * @property {number} [IndexSegment] Request to retrieve an index segment (SegmentBase)
 * @property {number} [MediaSegment] Request to retrieve a media segment (video/audio/image/text chunk)
 * @property {number} [BitstreamSwitchingSegment] Bitrate stream switching type of request
 * @property {number} [other] Other type of request
 *
 */

/**
 * @typedef {Object} module:Settings~CmcdSettings
 * @property {boolean} [enable=false] Enable or disable the CMCD reporting.
 * @property {string} [sid] GUID identifying the current playback session. Should be in UUID format. If not specified a UUID will be automatically generated.
 * @property {string} [cid] A unique string to identify the current content. If not specified it will be a hash of the MPD url.
 * @property {string} [did=dash.js-cmcd-default-id] A unique string identifying the current device.
 */


/**
 * @class
 * @ignore
 */
function Settings() {
    let instance;

    /**
     * @const {PlayerSettings} defaultSettings
     * @ignore
     */
    const defaultSettings = {
        debug: {
            logLevel: Debug.LOG_LEVEL_WARNING
        },
        streaming: {
            metricsMaxListDepth: 1000,
            abandonLoadTimeout: 10000,
            liveDelayFragmentCount: NaN,
            liveDelay: null,
            scheduleWhilePaused: true,
            fastSwitchEnabled: false,
            bufferPruningInterval: 10,
            bufferToKeep: 20,
            bufferAheadToKeep: 80,
            jumpGaps: true,
            smallGapLimit: 1.5,
            stableBufferTime: 12,
            bufferTimeAtTopQuality: 30,
            bufferTimeAtTopQualityLongForm: 60,
            longFormContentDurationThreshold: 600,
            wallclockTimeUpdateInterval: 50,
            lowLatencyEnabled: false,
            keepProtectionMediaKeys: false,
            useManifestDateHeaderTimeSource: true,
            useSuggestedPresentationDelay: true,
            useAppendWindowEnd: true,
            manifestUpdateRetryInterval: 100,
            liveCatchUpMinDrift: 0.02,
            liveCatchUpMaxDrift: 0,
            liveCatchUpPlaybackRate: 0.5,
            lastBitrateCachingInfo: {enabled: true, ttl: 360000},
            lastMediaSettingsCachingInfo: {enabled: true, ttl: 360000},
            cacheLoadThresholds: {video: 50, audio: 5},
            retryIntervals: {
                [HTTPRequest.MPD_TYPE]: 500,
                [HTTPRequest.XLINK_EXPANSION_TYPE]: 500,
                [HTTPRequest.MEDIA_SEGMENT_TYPE]: 1000,
                [HTTPRequest.INIT_SEGMENT_TYPE]: 1000,
                [HTTPRequest.BITSTREAM_SWITCHING_SEGMENT_TYPE]: 1000,
                [HTTPRequest.INDEX_SEGMENT_TYPE]: 1000,
                [HTTPRequest.OTHER_TYPE]: 1000,
                lowLatencyReductionFactor: 10
            },
            retryAttempts: {
                [HTTPRequest.MPD_TYPE]: 3,
                [HTTPRequest.XLINK_EXPANSION_TYPE]: 1,
                [HTTPRequest.MEDIA_SEGMENT_TYPE]: 3,
                [HTTPRequest.INIT_SEGMENT_TYPE]: 3,
                [HTTPRequest.BITSTREAM_SWITCHING_SEGMENT_TYPE]: 3,
                [HTTPRequest.INDEX_SEGMENT_TYPE]: 3,
                [HTTPRequest.OTHER_TYPE]: 3,
                lowLatencyMultiplyFactor: 5
            },
            abr: {
                movingAverageMethod: Constants.MOVING_AVERAGE_SLIDING_WINDOW,
                ABRStrategy: Constants.ABR_STRATEGY_DYNAMIC,
                bandwidthSafetyFactor: 0.9,
                useDefaultABRRules: true,
                useBufferOccupancyABR: false,
                useDeadTimeLatency: true,
                limitBitrateByPortal: false,
                usePixelRatioInLimitBitrateByPortal: false,
                maxBitrate: {audio: -1, video: -1},
                minBitrate: {audio: -1, video: -1},
                maxRepresentationRatio: {audio: 1, video: 1},
                initialBitrate: {audio: -1, video: -1},
                initialRepresentationRatio: {audio: -1, video: -1},
                autoSwitchBitrate: {audio: true, video: true}
            },
            cmcd: {
                enabled: false,
                sid: null,
                cid: null,
                did: null
            }
        }
    };

    let settings = Utils.clone(defaultSettings);

    //Merge in the settings. If something exists in the new config that doesn't match the schema of the default config,
    //regard it as an error and log it.
    function mixinSettings(source, dest, path) {
        for (let n in source) {
            if (source.hasOwnProperty(n)) {
                if (dest.hasOwnProperty(n)) {
                    if (typeof source[n] === 'object' && source[n] !== null) {
                        mixinSettings(source[n], dest[n], path.slice() + n + '.');
                    } else {
                        dest[n] = Utils.clone(source[n]);
                    }
                }
            }
        }
    }

    /**
     * Return the settings object. Don't copy/store this object, you won't get updates.
     * @func
     * @instance
     */
    function get() {
        return settings;
    }

    /**
     * @func
     * @instance
     * @param {object} settingsObj - This should be a partial object of the Settings.Schema type. That is, fields defined should match the path (e.g.
     * settingsObj.streaming.abr.autoSwitchBitrate.audio -> defaultSettings.streaming.abr.autoSwitchBitrate.audio). Where an element's path does
     * not match it is ignored, and a warning is logged.
     *
     * Use to change the settings object. Any new values defined will overwrite the settings and anything undefined will not change.
     * Implementers of new settings should add it in an approriate namespace to the defaultSettings object and give it a default value (that is not undefined).
     *
     */
    function update(settingsObj) {
        if (typeof settingsObj === 'object') {
            mixinSettings(settingsObj, settings, '');
        }
    }

    /**
     * Resets the settings object. Everything is set to its default value.
     * @func
     * @instance
     *
     */
    function reset() {
        settings = Utils.clone(defaultSettings);
    }

    instance = {
        get: get,
        update: update,
        reset: reset
    };

    return instance;
}


Settings.__dashjs_factory_name = 'Settings';
let factory = FactoryMaker.getSingletonFactory(Settings);
export default factory;