Skip to content

Latest commit

 

History

History
297 lines (232 loc) · 12.3 KB

WORKING_GROUPS.md

File metadata and controls

297 lines (232 loc) · 12.3 KB

io.js Working Groups

io.js Working Groups are autonomous projects created by the Technical Committee (TC).

Working Groups can be formed at any time but must be ratified by the TC. Once formed the work defined in the Working Group charter is the responsibility of the WG rather than the TC.

It is important that Working Groups are not formed pre-maturely. Working Groups are not formed to begin a set of tasks but instead are formed once that work is already underway and the contributors think it would benefit from being done as an autonomous project.

If the work defined in a Working Group charter is completed the Working Group should be dissolved and the responsibility for governance absorbed back in to the TC.

Current Working Groups

Website

The website working group's purpose is to build and maintain a public website for the io.js project.

Its responsibilities are:

  • Develop and maintain a build and automation system for iojs.org.
  • Ensure the site is regularly updated with changes made to io.js like releases and features.
  • Foster and enable a community of translators.

The current members can be found in their README.

Streams

The Streams WG is dedicated to the support and improvement of the Streams API as used in io.js and the npm ecosystem. We seek to create a composable API that solves the problem of representing multiple occurrences of an event over time in a humane, low-overhead fashion. Improvements to the API will be driven by the needs of the ecosystem; interoperability and backwards compatibility with other solutions and prior versions are paramount in importance. Our responsibilities include:

  • Addressing stream issues on the io.js issue tracker.
  • Authoring and editing stream documentation within the io.js project.
  • Reviewing changes to stream subclasses within the io.js project.
  • Redirecting changes to streams from the io.js project to this project.
  • Assisting in the implementation of stream providers within io.js.
  • Recommending versions of readable-stream to be included in io.js.
  • Messaging about the future of streams to give the community advance notice of changes.

Initial members are:

  • @chrisdickinson
  • @isaacs
  • @rvagg
  • @Raynos
  • @calvinmetcalf
  • @sonewman
  • @mafintosh
  • @timgestson
  • @domenic

Build

The build working group's purpose is to create and maintain a distributed automation infrastructure.

Its responsibilities are:

  • Produce Packages for all target platforms.
  • Run tests.
  • Run performance testing and comparisons.
  • Creates and manages official docker images.
  • Creates and manages build-containers.

The current members can be found in their README.

Starting a WG

A Working Group is established by first defining a charter that can be ratified by the TC. A charter is a statement of purpose, a list of responsibilities and a list of initial membership.

A working group needs 3 initial members. These should be individuals already undertaking the work described in the charter.

The list of responsibilities should be specific. Once established these responsibilities are no longer governed by the TC and therefor should not be broad or subjective. The only recourse the TC has over the working group is to revoke the entire charter and take on the work previously done by the working group themselves.

If the responsibilities described in the charter are currently undertaken by another WG then the charter will additionally have to be ratified by that WG.

You can submit the WG charter for ratification by sending a Pull Request to this document which adds it to the list of current Working Groups. Once ratified the list of members should be maintained in the Working Group's README.

Bootstrap Governance

Once the TC ratifies a charter the WG inherits the following documentation for governance, contribution, conduct and an MIT LICENSE. The WG is free to change these documents through their own governance process, hence the term "bootstrap."

[insert WG name] Working Group

The io.js [insert WG name] is jointly governed by a Working Group (WG) which is responsible for high-level guidance of the project.

The WG has final authority over this project including:

  • Technical direction
  • Project governance and process (including this policy)
  • Contribution policy
  • GitHub repository hosting
  • Conduct guidelines
  • Maintaining the list of additional Collaborators

For the current list of WG members, see the project README.md.

Collaborators

The iojs/website GitHub repository is maintained by the WG and additional Collaborators who are added by the WG on an ongoing basis.

Individuals making significant and valuable contributions are made Collaborators and given commit-access to the project. These individuals are identified by the WG and their addition as Collaborators is discussed during the weekly WG meeting.

Note: If you make a significant contribution and are not considered for commit-access log an issue or contact a WG member directly and it will be brought up in the next WG meeting.

Modifications of the contents of the iojs/website repository are made on a collaborative basis. Anybody with a GitHub account may propose a modification via pull request and it will be considered by the project Collaborators. All pull requests must be reviewed and accepted by a Collaborator with sufficient expertise who is able to take full responsibility for the change. In the case of pull requests proposed by an existing Collaborator, an additional Collaborator is required for sign-off. Consensus should be sought if additional Collaborators participate and there is disagreement around a particular modification. See Consensus Seeking Process below for further detail on the consensus model used for governance.

Collaborators may opt to elevate significant or controversial modifications, or modifications that have not found consensus to the WG for discussion by assigning the WG-agenda tag to a pull request or issue. The WG should serve as the final arbiter where required.

For the current list of Collaborators, see the project README.md.

WG Membership

WG seats are not time-limited. There is no fixed size of the WG. However, the expected target is between 6 and 12, to ensure adequate coverage of important areas of expertise, balanced with the ability to make decisions efficiently.

There is no specific set of requirements or qualifications for WG membership beyond these rules.

The WG may add additional members to the WG by unanimous consensus.

A WG member may be removed from the WG by voluntary resignation, or by unanimous consensus of all other WG members.

Changes to WG membership should be posted in the agenda, and may be suggested as any other agenda item (see "WG Meetings" below).

If an addition or removal is proposed during a meeting, and the full WG is not in attendance to participate, then the addition or removal is added to the agenda for the subsequent meeting. This is to ensure that all members are given the opportunity to participate in all membership decisions. If a WG member is unable to attend a meeting where a planned membership decision is being made, then their consent is assumed.

No more than 1/3 of the WG members may be affiliated with the same employer. If removal or resignation of a WG member, or a change of employment by a WG member, creates a situation where more than 1/3 of the WG membership shares an employer, then the situation must be immediately remedied by the resignation or removal of one or more WG members affiliated with the over-represented employer(s).

WG Meetings

The WG meets weekly on a Google Hangout On Air. The meeting is run by a designated moderator approved by the WG. Each meeting should be published to YouTube.

Items are added to the WG agenda which are considered contentious or are modifications of governance, contribution policy, WG membership, or release process.

The intention of the agenda is not to approve or review all patches, that should happen continuously on GitHub and be handled by the larger group of Collaborators.

Any community member or contributor can ask that something be added to the next meeting's agenda by logging a GitHub Issue. Any Collaborator, WG member or the moderator can add the item to the agenda by adding the WG-agenda tag to the issue.

Prior to each WG meeting the moderator will share the Agenda with members of the WG. WG members can add any items they like to the agenda at the beginning of each meeting. The moderator and the WG cannot veto or remove items.

The WG may invite persons or representatives from certain projects to participate in a non-voting capacity.

The moderator is responsible for summarizing the discussion of each agenda item and send it as a pull request after the meeting.

Consensus Seeking Process

The WG follows a Consensus Seeking decision making model.

When an agenda item has appeared to reach a consensus the moderator will ask "Does anyone object?" as a final call for dissent from the consensus.

If an agenda item cannot reach a consensus a WG member can call for either a closing vote or a vote to table the issue to the next meeting. The call for a vote must be seconded by a majority of the WG or else the discussion will continue. Simple majority wins.

Note that changes to WG membership require unanimous consensus. See "WG Membership" above.

Developer's Certificate of Origin 1.0

By making a contribution to this project, I certify that:

  • (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; or
  • (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; or
  • (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it.

Code of Conduct

This Code of Conduct is adapted from Rust's wonderful CoC.

  • We are committed to providing a friendly, safe and welcoming environment for all, regardless of gender, sexual orientation, disability, ethnicity, religion, or similar personal characteristic.
  • Please avoid using overtly sexual nicknames or other nicknames that might detract from a friendly, safe and welcoming environment for all.
  • Please be kind and courteous. There's no need to be mean or rude.
  • Respect that people have differences of opinion and that every design or implementation choice carries a trade-off and numerous costs. There is seldom a right answer.
  • Please keep unstructured critique to a minimum. If you have solid ideas you want to experiment with, make a fork and see how it works.
  • We will exclude you from interaction if you insult, demean or harass anyone. That is not welcome behaviour. We interpret the term "harassment" as including the definition in the Citizen Code of Conduct; if you have any lack of clarity about what might be included in that concept, please read their definition. In particular, we don't tolerate behavior that excludes people in socially marginalized groups.
  • Private harassment is also unacceptable. No matter who you are, if you feel you have been or are being harassed or made uncomfortable by a community member, please contact one of the channel ops or any of the TC members immediately with a capture (log, photo, email) of the harassment if possible. Whether you're a regular contributor or a newcomer, we care about making this community a safe place for you and we've got your back.
  • Likewise any spamming, trolling, flaming, baiting or other attention-stealing behaviour is not welcome.
  • Avoid the use of personal pronouns in code comments or documentation. There is no need to address persons when explaining code (e.g. "When the developer")