Replies: 1 comment 2 replies
-
Hello everyone, I also had the same question that David has. It seems that the newest lldpd version does not support configuring 802.3bt support through lldpcli commands. I checked the manual and do not see bt poe supported listed under the lldpcli configure dot3 power command. I took a look through the code and never see the set function used for the various 802.3bt parameters such as "lldpctl_k_dot3_power_type_ext." Is there a command that I am missing for enabling 802.3bt dot3 POE-MDI TLV power parameters? Is support for the configuring 802.3bt through lldpcli commands planned in a future version? I appreciate your time to help answer my question. Thank you! |
Beta Was this translation helpful? Give feedback.
-
Hello LLDP folks,
I use 1.0.15 lldp stable version. From the source code, I built/run the image on Ubuntu LTS 14.04.
Changenote of 1.0.5 says it supports 802.3 BT mode.
With the lldpcli, I can generate LLDPDU including "Ieee 802.3 - Power Via MDI" TLV, whose TLV type=127.
This TLV includes TLV header, basic field, DLL classification extention but not type 3 and type 4 extension with the command below:
lldpcli configure dot3 power pd supported enabled powerpairs spare class class-3 type 1 source pse priority low requested 10000 allocated 15000
I am wondering how I can generate LLDPDU including the type 3 and type 4 extention.
Additionally, if LLDPDU does not include the type 3 and type 4 extention" for type 3 or 4, do we violate the standard?
Any help will be highly appreciated.
Regards,
David Choi
Beta Was this translation helpful? Give feedback.
All reactions