Skip to content
This repository has been archived by the owner on Nov 6, 2023. It is now read-only.

Latest commit

 

History

History
86 lines (62 loc) · 1.5 KB

README.md

File metadata and controls

86 lines (62 loc) · 1.5 KB
Raw

Canairi - Air Quaility Monitoring

Project utilizing the Raspberry PI Zero W to retrieve sensor data from BME680 and calculate an air quality index to retrieve information about the pollution of indoor rooms. All set up in a dockerized environment.

Setup

Setup

Prerequisite

  • Raspberry Pi Zero W
  • BME 680
  • SD Card

Get Started

  1. Flash the official Raspberry Pi Lite Image on SD Card
  2. Edit SD Card Boot Folder to boot Raspberry Pi0W into headless mode
  3. Install dependencies on PI0W
  4. Clone Repository
  5. Build and Start Docker Compose

Edit SD Card

# create empty wifi config file
touch wpa_supplicant.conf

# enter the following into file
country=DE
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
  ssid="NETWORK_NAME"
  psk="NETWORK_PASSWORD"
  key_mgmt=WPA-PSK
}

# create empty ssh file
touch ssh

Install Dependencies on PI0W

# update system
sudo apt-get update
sudo apt-get upgrade

# enter raspberry config and enable i2c interface
sudo raspi-config

# install git
sudo apt-get install git

# install docker and docker-compose
curl -sSL https://get.docker.com | sh
sudo usermod -aG docker pi
sudo systemctl enable docker
sudo apt-get install python3-pip
sudo pip3 install docker-compose

# restart system
sudo reboot

Setup Software

git clone https://github.com/lmarschall/canairi.git
cd ~/canairi
docker-compose build
docker-compose up