Low profile PCIe x1 version doesn't work on Proxmox v8.2

[jackj120]

Hi i've tried to install the needed drivers following this guide: https://forum.proxmox.com/threads/coral-tpu-pcie-on-proxmox.140128/ , https://forum.proxmox.com/threads/coral-tpu-pcie-on-proxmox.140128/ and the coral websites but nothing...
When i type
lspci -nn | grep 089a nothing is showed . I saw that sometimes i have problems with dkms .
Also with no guides software installed when i run lspci i don't see nothing , i think that something must be showed .
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
02:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
Idk what it's the problem, hope in some help.

[magic-blue-smoke]

Hi @jackj120

• is this lspci for host or vm?
• did you set up PCIe passthrough for TPUs?

[jackj120]

Its lspci from the host(then i've to do this for my frigate vm) . I saw that i've problem with gasket-dkms idk if it's related :
Deprecated feature: REMAKE_INITRD (/var/lib/dkms/gasket/1.0/source/dkms.conf)
Error! Bad return status for module build on kernel: 6.5.13-5-pve (x86_64)
Consult /var/lib/dkms/gasket/1.0/build/make.log for more information.
dpkg: error processing package gasket-dkms (--configure):
installed gasket-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
gasket-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)

with nano /var/lib/dkms/gasket/1.0/build/make.log return this
DKMS make.log for gasket-1.0 for kernel 6.5.13-5-pve (x86_64)
Sun May 5 08:54:29 PM CEST 2024
make: Entering directory '/usr/src/linux-headers-6.5.13-5-pve'
CC [M] /var/lib/dkms/gasket/1.0/build/gasket_core.o
CC [M] /var/lib/dkms/gasket/1.0/build/gasket_ioctl.o
CC [M] /var/lib/dkms/gasket/1.0/build/gasket_interrupt.o
CC [M] /var/lib/dkms/gasket/1.0/build/gasket_page_table.o
CC [M] /var/lib/dkms/gasket/1.0/build/gasket_sysfs.o
CC [M] /var/lib/dkms/gasket/1.0/build/apex_driver.o
/var/lib/dkms/gasket/1.0/build/gasket_core.c: In function ‘gasket_register_device’:
/var/lib/dkms/gasket/1.0/build/gasket_core.c:1841:41: error: passing argument 1 of ‘class_create’ from incompatible p>
1841 | class_create(driver_desc->module, driver_desc->name);
| ~~~~~~~~~~~^~~~~~~~
| |
| struct module *
In file included from ./include/linux/device.h:31,
from ./include/linux/cdev.h:8,
from /var/lib/dkms/gasket/1.0/build/gasket_core.h:11,
from /var/lib/dkms/gasket/1.0/build/gasket_core.c:12:
./include/linux/device/class.h:230:54: note: expected ‘const char *’ but argument is of type ‘struct module *’
230 | struct class * __must_check class_create(const char *name);
^~~~~~~~~~~~
cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:251: /var/lib/dkms/gasket/1.0/build/gasket_core.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/usr/src/linux-headers-6.5.13-5-pve/Makefile:2039: /var/lib/dkms/gasket/1.0/build] Error 2
make: *** [Makefile:234: __sub-make] Error 2
make: Leaving directory '/usr/src/linux-headers-6.5.13-5-pve'

[Calimerorulez]

@jackj120

google-coral/edgetpu#695

Maybe?

[jackj120]

@Calimerorulez Yeah i think it's the same problem, i saw it... So i need only to wait the fix?

[Calimerorulez]

@jackj120

I think a solution is that you build the driver by yourself, but that is fairly complicated.

This is a comment about which commands to use:

google-coral/edgetpu#808 (comment)

[jackj120]

@Calimerorulez
I'll try this comment . Thank for the help .

[jackj120]

@Calimerorulez
Ok i've followed the instruction and the installation worked fine but i don't see the coral with lspci

i've tried also this lspci -nn | grep 089a but nothing it's returned

lspci -v
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge
Flags: fast devsel, NUMA node 0, IOMMU group 0
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-

00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
Flags: fast devsel, IRQ 26, NUMA node 0
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
Flags: bus master, fast devsel, latency 0, IRQ 27, NUMA node 0, IOMMU group 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: fd000000-fe0fffff [size=17M] [32-bit]
Prefetchable memory behind bridge: c0000000-d1ffffff [size=288M] [32-bit]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport

00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
Flags: bus master, fast devsel, latency 0, IRQ 28, NUMA node 0, IOMMU group 2
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: fe200000-fe2fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport

00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4) (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0, IOMMU group 3
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: fe100000-fe1fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: d2100000-d21fffff [size=1M] [32-bit]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4)
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19, NUMA node 0, IOMMU group 4
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f070 [size=8]
I/O ports at f060 [size=4]
I/O ports at f050 [size=16]
Memory at fe30b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18, NUMA node 0, IOMMU group 5
Memory at fe30a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17, NUMA node 0, IOMMU group 5
Memory at fe309000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18, NUMA node 0, IOMMU group 6
Memory at fe308000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17, NUMA node 0, IOMMU group 6
Memory at fe307000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
Flags: 66MHz, medium devsel, NUMA node 0, IOMMU group 7
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
Subsystem: Gigabyte Technology Co., Ltd GA-MA78GM-S2H motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17, NUMA node 0, IOMMU group 8
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at f000 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, pata_acpi

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd SBx00 Azalia (Intel HDA)
Flags: bus master, slow devsel, latency 32, IRQ 16, NUMA node 0, IOMMU group 9
Memory at fe300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Flags: bus master, 66MHz, medium devsel, latency 0, NUMA node 0, IOMMU group 10

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64, NUMA node 0, IOMMU group 11
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [32-bit]

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18, NUMA node 0, IOMMU group 12
Memory at fe306000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci

00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18, NUMA node 0, IOMMU group 13
Memory at fe305000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci

00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-78/880-series motherboard
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17, NUMA node 0, IOMMU group 13
Memory at fe304000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
Flags: fast devsel, NUMA node 0
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
Flags: fast devsel, NUMA node 0

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
Flags: fast devsel, NUMA node 0

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
Flags: fast devsel, NUMA node 0
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
Flags: fast devsel, NUMA node 0
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
Flags: fast devsel, NUMA node 0

01:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. GM204 [GeForce GTX 970]
Flags: bus master, fast devsel, latency 0, IRQ 34, NUMA node 0, IOMMU group 14
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at e000 [size=128]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [258] L1 PM Substates
Capabilities: [128] Power Budgeting Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia

01:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. GM204 High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 35, NUMA node 0, IOMMU group 14
Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

02:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd VL805/806 xHCI USB 3.0 Controller
Flags: fast devsel, IRQ 33, NUMA node 0, IOMMU group 15
Memory at fe200000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [c4] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel modules: xhci_pci

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
Flags: bus master, fast devsel, latency 0, IRQ 31, NUMA node 0, IOMMU group 16
I/O ports at d000 [size=256]
Memory at fe100000 (64-bit, non-prefetchable) [size=4K]
Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
Capabilities: [170] Latency Tolerance Reporting
Kernel driver in use: r8169
Kernel modules: r8169

[Calimerorulez]

What is the output of

lsmod | grep apex

[jackj120]

@Calimerorulez Nothing

[Calimerorulez]

@jackj120

Then the driver you just compiled and installed isn't loaded.

Did you reboot?

[jackj120]

@Calimerorulez rebooted for the second time and nothing.

[Calimerorulez]

@jackj120

Then I currently out of options too I'm afraid...

Maybe I'll think up something later

[jackj120]

@Calimerorulez Thank you anyway... much appreciated . Hope isn't some problem or with the coral or the support

[magic-blue-smoke]

@jackj120 adapter board has PCIe switch and Coral TPUs are behind it, ie we should see it first. With lspci output provided, I can't see ASMedia device.
On a host machine, could you please show output of lspci -nn | grep 1182?
If nothing, check if adapter is properly seated in PCIe slot and not reversed (sometimes this happens)
If it won't work, please contact me using form at the bottom of the page for adapter replacement

[jackj120]

@magic-blue-smoke
Just tried lspci -nn | grep 1182 but nothing and yes the adapter is properly seated . I've tried multiple times reboot ,connect and disconnect . I 've sent the contact in your form.

[rice1204]

same issue here on a PCIe card I received last week.
Will send an email.

EDIT: excuse the alarm. Got it working by adding a salvaged PCI bracket from another card. Don't know if that just caused the card to seat properly or what, but either way, good news.