title | short-title | slug | page-type | browser-compat |
---|---|---|---|---|
MutationObserver: observe() method |
observe() |
Web/API/MutationObserver/observe |
web-api-instance-method |
api.MutationObserver.observe |
{{APIRef("DOM WHATWG")}}
The {{domxref("MutationObserver")}} method observe()
configures the MutationObserver
callback to begin receiving notifications of changes to the DOM that match the given options.
Depending on the configuration, the observer may watch a single {{domxref("Node")}} in the DOM tree, or that node and some or all of its descendant nodes.
To stop the MutationObserver
(so that none of its callbacks will be triggered any longer), call {{domxref("MutationObserver.disconnect()")}}.
observe(target, options)
-
target
- : A DOM {{domxref("Node")}} (which may be an {{domxref("Element")}}) within the DOM tree to watch for changes, or to be the root of a subtree of nodes to be watched.
-
options
-
: An object providing options that describe which DOM mutations should be reported to
mutationObserver
'scallback
. At a minimum, one ofchildList
,attributes
, and/orcharacterData
must betrue
when you call {{domxref("MutationObserver.observe", "observe()")}}. Otherwise, aTypeError
exception will be thrown.Options are as follows:
subtree
{{optional_inline}}- : Set to
true
to extend monitoring to the entire subtree of nodes rooted attarget
. All of the other properties are then extended to all of the nodes in the subtree instead of applying solely to thetarget
node. The default value isfalse
.
- : Set to
childList
{{optional_inline}}- : Set to
true
to monitor the target node (and, ifsubtree
istrue
, its descendants) for the addition of new child nodes or removal of existing child nodes. The default value isfalse
.
- : Set to
attributes
{{optional_inline}}- : Set to
true
to watch for changes to the value of attributes on the node or nodes being monitored. The default value istrue
if either ofattributeFilter
orattributeOldValue
is specified, otherwise the default value isfalse
.
- : Set to
attributeFilter
{{optional_inline}}- : An array of specific attribute names to be monitored. If this property isn't included, changes to all attributes cause mutation notifications.
attributeOldValue
{{optional_inline}}- : Set to
true
to record the previous value of any attribute that changes when monitoring the node or nodes for attribute changes; See Monitoring attribute values for an example of watching for attribute changes and recording values. The default value isfalse
.
- : Set to
characterData
{{optional_inline}}- : Set to
true
to monitor the specified target node (and, ifsubtree
istrue
, its descendants) for changes to the character data contained within the node or nodes. The default value istrue
ifcharacterDataOldValue
is specified, otherwise the default value isfalse
.
- : Set to
characterDataOldValue
{{optional_inline}}- : Set to
true
to record the previous value of a node's text whenever the text changes on nodes being monitored. The default value isfalse
.
- : Set to
-
None ({{jsxref("undefined")}}).
-
{{jsxref('TypeError')}}
-
: Thrown in any of the following circumstances:
- The
options
are configured such that nothing will actually be monitored. (For example, ifchildList
,attributes
, andcharacterData
are allfalse
.) - The value of
options.attributes
isfalse
(indicating that attribute changes are not to be monitored), butattributeOldValue
istrue
and/orattributeFilter
is present. - The
characterDataOldValue
option istrue
butcharacterData
isfalse
(indicating that character changes are not to be monitored).
- The
-
You can call observe()
multiple times on the same
MutationObserver
to watch for changes to different parts of the DOM tree
and/or different types of changes. There are some caveats to note:
- If you call
observe()
on a node that's already being observed by the sameMutationObserver
, all existing observers are automatically removed from all targets being observed before the new observer is activated. - If the same
MutationObserver
is not already in use on the target, then the existing observers are left alone and the new one is added.
Mutation observers are intended to let you be able to watch the desired set of nodes over time, even if the direct connections between those nodes are severed. If you begin watching a subtree of nodes, and a portion of that subtree is detached and moved elsewhere in the DOM, you continue to watch the detached segment of nodes, receiving the same callbacks as before the nodes were detached from the original subtree.
In other words, until you've been notified that nodes are being split off from your monitored subtree, you'll get notifications of changes to that split-off subtree and its nodes. This prevents you from missing changes that occur after the connection is severed and before you have a chance to specifically begin monitoring the moved node or subtree for changes.
Theoretically, this means that if you keep track of the {{domxref("MutationRecord")}} objects describing the changes that occur, you should be able to "undo" the changes, rewinding the DOM back to its initial state.
In this example, we demonstrate how to call the method observe()
on an instance of {{domxref("MutationObserver")}}, once it has been set up, passing it a target element
and an options
object.
// create a new instance of `MutationObserver` named `observer`,
// passing it a callback function
const observer = new MutationObserver(() => {
console.log("callback that runs when observer is triggered");
});
// call `observe()`, passing it the element to observe, and the options object
observer.observe(document.querySelector("#element-to-observe"), {
subtree: true,
childList: true,
});
In this example, a Mutation Observer is set up to watch for changes to the
status
and username
attributes in any elements contained
within a subtree that displays the names of users in a chat room. This lets the code,
for example, reflect changes to users' nicknames, or to mark them as away from keyboard
(AFK) or offline.
function callback(mutationList) {
mutationList.forEach((mutation) => {
const { attributeName, oldValue, target } = mutation;
const newValue = target.getAttribute(attributeName);
console.log(`${attributeName}: ${oldValue} -> ${newValue}`);
});
}
const userListElement = document.querySelector("#userlist");
const observer = new MutationObserver(callback);
observer.observe(userListElement, {
attributeFilter: ["status", "username"],
attributeOldValue: true,
subtree: true,
});
In this example we observe an element for attribute value changes, and add a button which toggles the element's dir
attribute between "ltr"
and "rtl"
. Inside the observer's callback, we log the old value of the attribute.
<button id="toggle">Toggle direction</button><br />
<div id="container">
<input type="text" id="rhubarb" dir="ltr" value="Tofu" />
</div>
<pre id="output"></pre>
body {
background-color: paleturquoise;
}
button,
input,
pre {
margin: 0.5rem;
}
const toggle = document.querySelector("#toggle");
const rhubarb = document.querySelector("#rhubarb");
const observerTarget = document.querySelector("#container");
const output = document.querySelector("#output");
toggle.addEventListener("click", () => {
rhubarb.dir = rhubarb.dir === "ltr" ? "rtl" : "ltr";
});
const config = {
subtree: true,
attributeOldValue: true,
};
const callback = (mutationList) => {
for (const mutation of mutationList) {
if (mutation.type === "attributes") {
output.textContent = `The ${mutation.attributeName} attribute was modified from "${mutation.oldValue}".`;
}
}
};
const observer = new MutationObserver(callback);
observer.observe(observerTarget, config);
{{EmbedLiveSample("Monitoring attribute values")}}
{{Specifications}}
{{Compat}}