examples

Examples

This directory contains a range of example ESP-IDF projects. These examples are intended to demonstrate parts of the ESP-IDF functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into subdirectories by category. Each category directory contains one or more example projects:

• bluetooth/bluedroid Classic BT, BLE and coex examples using default Bluedroid host stack.
• bluetooth/nimble BLE examples using NimBLE host stack.
• bluetooth/esp_ble_mesh ESP BLE Mesh examples.
• bluetooth/hci HCI transport (VHCI and HCI UART) examples.
• build_system Examples of build system features.
• cxx C++ language utilization examples and experimental components.
• ethernet Ethernet network examples.
• get-started Simple examples with minimal functionality. Good start point for beginners.
• mesh Wi-Fi Mesh examples.
• openthread OpenThread examples.
• peripherals Examples showing driver functionality for the various onboard ESP32 peripherals.
• protocols Examples showing network protocol interactions.
• provisioning Wi-Fi provisioning examples.
• security Examples about security features.
• storage Examples showing data storage methods using SPI flash, external storage like the SD/MMC interface and flash partitioning.
• system Demonstrates some internal chip features, or debugging & development tools.
• wifi Advanced Wi-Fi features (For network protocol examples, see protocols instead.)

In addition to these examples, commmon_components directory contains code shared by several examples.

Using Examples

Before building an example, be sure to follow the ESP-IDF Getting Started Guide to ensure you have the required development environment.

Building an example is the same as building any other project:

• Change into the directory of the new example you'd like to build.
• Run idf.py set-target TARGET to select the correct chip target to build before opening the project configuration menu. By default the target is esp32. For all options see idf.py set-target --help
• Run idf.py menuconfig to open the project configuration menu. Most examples have a project-specific "Example Configuration" section here (for example, to set the WiFi SSID & password to use).
• idf.py build to build the example.
• Follow the printed instructions to flash, or run idf.py -p PORT flash.

Copying Examples

Each example is a standalone project. The examples do not have to be inside the esp-idf directory. You can copy an example directory to anywhere on your computer in order to make a copy that you can modify and work with.

The IDF_PATH environment variable is the only thing that connects the example to the rest of ESP-IDF.

If you're looking for a more bare-bones project to start from, try esp-idf-template.

Contributing Examples

If you have a new example you think we'd like, please consider sending it to us as a Pull Request.

In the ESP-IDF documentation, you can find a "Creating Examples" page which lays out the steps to creating a top quality example.