Skip to content
This repository has been archived by the owner on Feb 12, 2024. It is now read-only.

Latest commit

 

History

History
413 lines (308 loc) · 17.1 KB

HOWTO.md

File metadata and controls

413 lines (308 loc) · 17.1 KB
Raw

How To Add/Change Proposal

There are parts that usually change in a proposal:

  • A new Action variant.
  • A new proposal topic.
  • A new nnsFunction or changes in one.

The change is not always just in one section. Many times you need to fix two sections simultaneously. For example, a new topic comes with a new nnsFunction.

New Action

The Action is a type in the Governance candid interface and it's used in the Proposal type:

type Action = variant {
  RegisterKnownNeuron : KnownNeuron;
  ManageNeuron : ManageNeuron;
  ExecuteNnsFunction : ExecuteNnsFunction;
  RewardNodeProvider : RewardNodeProvider;
  OpenSnsTokenSwap : OpenSnsTokenSwap;
  SetSnsTokenSwapOpenTimeWindow : SetSnsTokenSwapOpenTimeWindow;
  SetDefaultFollowees : SetDefaultFollowees;
  RewardNodeProviders : RewardNodeProviders;
  ManageNetworkEconomics : NetworkEconomics;
  ApproveGenesisKyc : ApproveGenesisKyc;
  AddOrRemoveNodeProvider : AddOrRemoveNodeProvider;
  Motion : Motion;
};

type Proposal = record {
  url : text;
  title : opt text;
  action : opt Action;
  summary : text;
};

Backwards Compatibility

Adding a new Action variant breaks backwards compatibility.

This means that we need to upgrade the candid files and related, and synchronize the release with the Governance canister.

How To Update

  • Upgrade candid file.
  • Add the i18n label in en.governance.json.
  • Upgrade the IC dependencies in nns-dapp canister.

How To Upgrade IC Dependencies

The Internet Computer dependencies are in the Cargo.toml of the backend project. They are the ones that point to git = "https://github.com/dfinity/ic". For example:

ic-nns-governance = { git = "https://github.com/dfinity/ic", rev = "89129b8212791d7e05cab62ff08eece2888a86e0" }

Upgrading them means change the commit in rev = ....

Normally, upgrading the dependency of ic-nns-governance is enough. But sometimes this library depends on the others and you need to upgrade the others.

Which commit?

Ideally, you should update to the upcoming commit that the NNS team is planning on releasing. You need to ask the NNS Team about their upcoming release.

Otherwise, you need to find the commit that added the new Action. Check the blame of the file in the IC repo or ask the NNS Team.

New Proposal Topic

The topic is a property of the ProposalInfo and it's of type integer.

type ProposalInfo = record {
  id : opt NeuronId;
  status : int32;
  topic : int32;
  failure_reason : opt GovernanceError;
  ballots : vec record { nat64; Ballot };
  proposal_timestamp_seconds : nat64;
  reward_event_round : nat64;
  deadline_timestamp_seconds : opt nat64;
  failed_timestamp_seconds : nat64;
  reject_cost_e8s : nat64;
  latest_tally : opt Tally;
  reward_status : int32;
  decided_timestamp_seconds : nat64;
  proposal : opt Proposal;
  proposer : opt NeuronId;
  executed_timestamp_seconds : nat64;
};

Backwards Compatibility

A new topic does not break backwards compatibility. Therefore, there is no need to synchronize releases.

Yet, a proposal of that topic won't be rendered properly until the changes are made and release.

How To Update

Changes in nns-js:

  • Add to topic entry in the governance enum.
  • Add topic entry in the Topic for proto files. You can search for TOPIC_NEURON_MANAGEMENT to better see where to add them.

Changes in nns-dapp:

  • Add i18n labels in en.governance.json. "topics" and "topics_description".
  • Add i18n labels in en.json: "follow_neurons.topic_XX_title" and "follow_neurons.topic_XX_description"

The topic descriptions can be found in governance.proto in IC repo.

Upgrade dependencies: Ledger ICP App

One dependency for the topics is the Ledger App developed by Zondax.

When there is a new topic we need to open an issue in the Ledger ICP repo.

We need to specify the number of the new topic and the title that should be shown in the screen. The title should be the same as the label in en.governance.json from the point above.

New or changes in nnsFunction

There are several steps to adding a new NNS function. They are described in detail below but at a high level they are:

  1. Verify that the intended change is for a new NNS function
  2. Understand the impact of a new NNS function
  3. Install a new governance canister
  4. Create a proposal with a payload for the new NNS function
  5. Verify that it doesn't render correctly yet
  6. Make the code changes
  7. Verify that it does render correctly

1. Verify that the intended change is for a new NNS function

All the NNS functions are defined here under pub enum NnsFunction {. Check towards the bottom of the list of NNS functions to find the new type. Note down its name and number. For example BitcoinSetConfig = 39.

Note: If the above link is broken because the file has moved, here is an old version to track down what happened.

2. Understand the impact

A new nnsFunction does not break backwards compatibility. Therefore, there is no need to synchronize releases.

Yet, a proposal with that nnsFunction won't be rendered properly until the changes are made and released.

3. Install a new governance canister

Here we explain how to do it on dfx network local. It's possible to do the same on testnet but that's not described here.

First you need to determine from which commit you want to install the governance canister. This can be the commit that added the new proposal type or the latest commit which provides built artifacts. The latter you can get by running newest_sha_with_disk_image.sh in the ic repo.

  1. git clone git@github.com:dfinity/ic.git
  2. cd ic
  3. git pull # If you didn't clone it just now
  4. IC_COMMIT="$(./gitlab-ci/src/artifacts/newest_sha_with_disk_image.sh origin/master)"
  5. echo $IC_COMMIT

The governance canister is installed by dfx when you run dfx nns install. However, if there is a version of the canister in the dfx cache, that version is the one that will be used. So we first need to remove the canister from the cache and then run dfx nns install.

Note: If the last step below (dfx nns install) gives an error because it can't download some canister (for example lifeline.wasm.gz), you can copy that canister back from the backup directory into the cache directory and try again, as long as it isn't the governance canister itself.

  1. DFX_CACHE_DIR="$(dfx cache show)"
  2. echo $DFX_CACHE_DIR
  3. WASMS_BACKUP_DIR="$HOME/dfx-cache-wasms-backup-$(date +"%Y-%m-%d")"
  4. echo $WASMS_BACKUP_DIR
  5. mkdir -p "$WASMS_BACKUP_DIR"
  6. mv $DFX_CACHE_DIR/wasms/* "$WASMS_BACKUP_DIR"
  7. ls -l "$WASMS_BACKUP_DIR"
  8. dfx start --clean # This will continue running so continue from another terminal
  9. echo $IC_COMMIT
  10. DFX_IC_COMMIT=$IC_COMMIT dfx nns install

4. Create a proposal with a payload for the new NNS function

You'll need to use ic-admin to create the proposal. Because the payload type is new, your current version of ic-admin probably doesn't know about it. So you should get a new version of ic-admin:

Note: For Linux, use https://download.dfinity.systems/ic/$IC_COMMIT/binaries/x86_64-linux/ic-admin.gz instead of the Darwin URL.

  1. curl "https://download.dfinity.systems/ic/$IC_COMMIT/openssl-static-binaries/x86_64-darwin/ic-admin.gz" | gunzip > ic-admin
  2. chmod +x ./ic-admin
  3. ./ic-admin --help

Then you'll need the ic-admin command to create the new proposal. You might be able to figure out the command from ic-admin --help but it's probably easiest to ask someone on the NNS team or the person who asked you to add the new proposal type. But for the --nns-url flag you should be able to use the result of

NNS_URL="http://localhost:$(dfx info replica-port)"
echo $NNS_URL

5. Verify that it doesn't render correctly yet

In order to be able to see the difference later, it's a good idea to see how the proposal renders without the required changes. You'll be able to see that it doesn't cause errors but also doesn't render the payload correctly.

To be able to deploy nns-dapp locally, you need its canister ID in .dfx/local/canister_ids.json. If it isn't already, make sure that .dfx/local/canister_ids.json has at least the following:

{
  "nns-dapp": {
    "local": "qsgjb-riaaa-aaaaa-aaaga-cai"
  }
}

If the file/directory doesn't exist at all, create it with that content.

Then deploy nns-dapp:

  1. Build the Wasm. E.g.: DFX_NETWORK=local ./build.sh
  2. Deploy the Wasm. E.g.: dfx canister install nns-dapp --wasm nns-dapp.wasm.gz --upgrade-unchanged --mode reinstall -v --argument "$(cat nns-dapp-arg-local.did)"

Now you can visit http://qsgjb-riaaa-aaaaa-aaaga-cai.localhost:8080/ and check the proposal.

6. Make the code changes

Changes in ic-js

You'll need to make a 1-line change in the ic-js repository to add the new NNS function to the NnsFunction enum in packages/nns/src/enums/governance.enums.ts. Use the name and number that you noted down above in the section "Verify that the intended change is for a new NNS function".

Changes in nns-dapp

You'll need to change the following files:

  1. rs/backend/Cargo.toml
  2. frontend/src/lib/i18n/en.governance.json
  3. rs/backend/src/proposals.rs
Cargo.toml

For each dependency that has git = "https://github.com/dfinity/ic", change the value of rev = to the commit you decided to use above in the section "Install a new governance canister".

If the proposal type also depends on types in other packages and/or repos, you may have to update/add those dependencies as well. To find out what exactly to add do the following:

  1. Find the file that has the type you need to depend on. For example for SetConfigRequest from the bitcoin canister, this is https://github.com/dfinity/bitcoin-canister/blob/master/interface/src/lib.rs
  2. Then look for the Cargo.toml in the parent directory of the /src/ directory.
  3. In the Cargo.toml file you should find the package name. For example for this Cargo.toml file, it's ic-btc-interface.
  4. Use that name to add a line in rs/backend/Cargo.toml like this:
ic-btc-interface = { git = "https://github.com/dfinity/bitcoin-canister", rev="2c91aaae834dace5f1826ef41a910500d133d35e" }
  1. But replace ic-btc-interface with the package name you found in step 3, replace the git = value with the correct repo link, and replace the rev = value with a revision that contains the changes that you need.
  2. Once the changes to Cargo.toml have been made, run cargo update to generate the required changes in Cargo.lock.

Note: The updated dependencies might have breaking changes which need to be fixed when building nns-dapp later.

en.governance.json

In en.governance.json, you'll have to add entries to 2 different maps: nns_functions and nns_functions_description.

As the key in both maps, use the name that you noted down before and also used in the enum in the ic-js repo.

For nns_functions use a label that's more or less the enum value name but human readable. For example, for BitcoinSetConfig use "Set Bitcoin Config".

For nns_functions_description you might be able to find a good description as a comment on the enum value definition. If not, you'll just have to ask someone for a good description. This description will be displayed when someone clicks on the (i) icon on the proposal detail page.

proposals.rs

You will need to know the fully qualified name of the proposal type you are adding. If you have the name of the type and the file it is defined in, you find the fully qualified name as follows:

  1. Find the package name as described in the Cargo.toml section above.
  2. Take the directories under /src/ on the path to the file.
  3. If the filename is not lib.rs, take the filename as well.
  4. Join everything from (1), (2), and (3) together with :: and replace any hyphens with underscores.

For example for BitcoinSetConfigProposal, you would get ic_nns_governance::governance::BitcoinSetConfigProposal.

If you're lucky, the new type can be used as-is. But in some cases a transformation to the type is required to render it in a human readable way.

If no transformation is required:

  1. Add a new entry to match nns_function. Use the number you noted down above in the section "Verify that the intended change is for a new NNS function". And use the (non-fully qualified) name of the new proposal type. For example:
38 => identity::<UpdateElectedReplicaVersionsPayload>(payload_bytes),
  1. Add an entry at the bottom of the mod def section to define the type, pointing to the fully qualified type you looked up above. For example:
// NNS function 38 - UpdateElectedReplicaVersions
/// The payload of a proposal to update elected replica versions.
// https://gitlab.com/dfinity-lab/public/ic/-/blob/90d82ff6e51a66306f9ddba820fcad984f4d85a5/rs/registry/canister/src/mutations/do_update_elected_replica_versions.rs#L193
pub type UpdateElectedReplicaVersionsPayload =
    registry_canister::mutations::do_update_elected_replica_versions::UpdateElectedReplicaVersionsPayload;

If a transformation is required:

  1. Add a new entry to match nns_function. Use the number you noted down above in the section "Verify that the intended change is for a new NNS function". And use the (non-fully qualified) name of the new proposal type, and then repeat it with the HumanReadable suffix. For example:
39 => transform::<BitcoinSetConfigProposal, BitcoinSetConfigProposalHumanReadable>(payload_bytes),
  1. Add an entry at the bottom of the mod def section to define the type, pointing to the fully qualified type you looked up above. For example:
// NNS function 39 - BitcoinSetConfig
// https://github.com/dfinity/ic/blob/ae00aff1373e9f6db375ff7076250a20bbf3eea0/rs/nns/governance/src/governance.rs#L8930
pub type BitcoinSetConfigProposal = ic_nns_governance::governance::BitcoinSetConfigProposal;
  1. Define the corresponding HumanReadable type. For example:
#[derive(CandidType, Serialize, Deserialize)]
pub struct BitcoinSetConfigProposalHumanReadable {
    pub network: ic_nns_governance::governance::BitcoinNetwork,
    pub set_config_request: ic_btc_interface::SetConfigRequest,
}
  1. Implement From<ProposalType> for ProposalTypeHumanReadable. For example:
impl From<BitcoinSetConfigProposal> for BitcoinSetConfigProposalHumanReadable {
    fn from(proposal: BitcoinSetConfigProposal) -> Self {
        let set_config_request: ic_btc_interface::SetConfigRequest = candid::decode_one(&proposal.payload).unwrap();
        BitcoinSetConfigProposalHumanReadable {
            network: proposal.network,
            set_config_request,
        }
    }
}

7. Verify that it does render correctly

Follow the steps from "Verify that it doesn't render correctly yet" above to deploy the nns-dapp canister again and verify that now the proposal renders correctly.