2 node ping-pong with GPU RDMA failed with local protection on IB in ib_mlx5_log.c

[commonknowhow]

Describe the bug

For two node ping-pong using “osu_bw D D” if UCX_NET_DEVIICES is set to a NDR device in close proximity, ie. mlx5_0:1, or mlx5_1:1,
Then the job would complain about a missing error callback and local protection on IB and die.

[ pairs: 1 ] [ window size: 64 ]

Size MB/s Messages/s

[1701292112.829711] [a670n1:162239:0] ucp_worker.c:1855 UCX INFO 0x100b240 inter-node cfg#3 tag(rc_mlx5/mlx5_0:1 rc_mlx5/mlx5_0:1)
[1701292112.836497] [a670n1:162239:0] ucp_ep.c:1508 UCX DIAG ep 0x7f1eac0b5108: error 'Input/output error' on rc_mlx5/mlx5_0:1 will not be handled since no error callback is installed
[a670n1:162239:0:162239] ib_mlx5_log.c:177 Local protection on mlx5_0:1/IB (synd 0x4 vend 0x51 hw_synd 0/2)
[a670n1:162239:0:162239] ib_mlx5_log.c:177 RC QP 0x169 wqe[3]: SEND s-- [inl len 10] [va 0x7f1c3c800000 len 1 lkey 0xb5d2] [rqpn 0x169 dlid=12 sl=0 port=1 src_path_bits=0]

Note that if UCX_NET_DEVICES is set to a non-local mlx5 IB port, eg mlx5_2:1, the GPU RDMA ping-pong test would run but the performance would be much lower than the NDR line speed.

Steps to Reproduce

• Command line

mpirun -hostfile $PBS_NODEFILE -np 2 --bind-to none -x UCX_IB_GPU_DIRECT_RDMA=1 ./runme

• UCX version used (from github branch XX or release YY) + UCX configure flags (can be checked by ucx_info -v)

[cliao@a670n1 pt2pt]$ ucx_info -v

Library version: 1.15.0

Library path: /home/users/cliao/ucx1.15_cuda12GDR/lib/libucs.so.0

API headers version: 1.15.0

Git branch 'v1.15.x', revision 348d14f

Configured with: --prefix=/home/users/cliao/ucx1.15_cuda12GDR --with-cuda=/home/users/cliao/cuda-12.0 --with-verbs --with-knem --with-rdmacm --enable-mt

• Any UCX environment variables used

UCX_IB_GPU_DIRECT_RDMA=1, UCX_NET_DEVICES=mlx5_0:1

Setup and versions

• OS version (e.g Linux distro) + CPU architecture (x86_64/aarch64/ppc64le/...)

[cliao@a670n1 pt2pt]$ head /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 143
model name : Intel(R) Xeon(R) Platinum 8468
stepping : 8
microcode : 0x2b000190
cpu MHz : 2101.000
cache size : 107520 KB
physical id : 0

• cat /etc/issue or cat /etc/redhat-release + uname -a

[cliao@a670n1 pt2pt]$ cat /etc/redhat-release
Red Hat Enterprise Linux release 8.7 (Ootpa)
[cliao@a670n1 pt2pt]$ uname -a
Linux a670n1 4.18.0-425.3.1.el8.x86_64 #1 SMP Fri Sep 30 11:45:06 EDT 2022 x86_64 x86_64 x86_64 GNU/Linux

• For Nvidia Bluefield SmartNIC include cat /etc/mlnx-release (the string identifies software and firmware setup)

N/A

• For RDMA/IB/RoCE related issues:
  • Driver version:
    • rpm -q rdma-core or rpm -q libibverbs

[cliao@a670n1 ~]$ rpm -q rdma-core
rdma-core-58mlnx43-1.58203.x86_64
[cliao@a670n1 ~]$ rpm -q libibverbs
libibverbs-58mlnx43-1.58203.x86_64
[cliao@a670n1 ~]$

    - or: MLNX_OFED version `ofed_info -s`

[cliao@a670n1 ~]$ ofed_info -s
MLNX_OFED_LINUX-5.8-2.0.3.0.202305301712:
[cliao@a670n1 ~]$

• HW information from ibstat or ibv_devinfo -vv command

[cliao@a670n1 ~]$ ibstat
CA 'mlx5_0'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392b82
System image GUID: 0xb83fd20300392b82
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 34
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392b82
Link layer: InfiniBand
CA 'mlx5_1'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392a54
System image GUID: 0xb83fd20300392a54
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 20
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392a54
Link layer: InfiniBand
CA 'mlx5_2'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392a80
System image GUID: 0xb83fd20300392a80
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 22
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392a80
Link layer: InfiniBand
CA 'mlx5_3'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392a86
System image GUID: 0xb83fd20300392a86
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 23
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392a86
Link layer: InfiniBand
CA 'mlx5_4'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392b2c
System image GUID: 0xb83fd20300392b2c
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 24
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392b2c
Link layer: InfiniBand
CA 'mlx5_5'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392a72
System image GUID: 0xb83fd20300392a72
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 25
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392a72
Link layer: InfiniBand
CA 'mlx5_6'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392a4a
System image GUID: 0xb83fd20300392a4a
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 26
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392a4a
Link layer: InfiniBand
CA 'mlx5_7'
CA type: MT4129
Number of ports: 1
Firmware version: 28.36.1010
Hardware version: 0
Node GUID: 0xb83fd20300392a3c
System image GUID: 0xb83fd20300392a3c
Port 1:
State: Active
Physical state: LinkUp
Rate: 400
Base lid: 27
LMC: 0
SM lid: 1
Capability mask: 0xa651e848
Port GUID: 0xb83fd20300392a3c
Link layer: InfiniBand
[cliao@a670n1 ~]$

• For GPU related issues:
  • GPU type

H100

• Cuda:
  • Drivers version

525.105.17

  - Check if peer-direct is loaded: `lsmod|grep nv_peer_mem` and/or gdrcopy: `lsmod|grep gdrdrv`

[cliao@a670n1 pt2pt]$ lsmod|grep nv_peer_mem
[cliao@a670n1 pt2pt]$ lsmod|grep gdrdrv
gdrdrv 24576 0
nvidia 56463360 147 nvidia_uvm,nvidia_peermem,gdrdrv,nvidia_modeset

Additional information (depending on the issue)

• OpenMPI version

openmpi-4.1.6

• Output of ucx_info -d to show transports and devices recognized by UCX

see attachment.

• Configure result - config.log
• Log file - configure UCX with "--enable-logging" - and run with "UCX_LOG_LEVEL=data"

see attachment.

ucx-d.output.txt

gpu_rdma_pingpong_logging.txt