Skip to content

Latest commit

 

History

History
833 lines (636 loc) · 34.2 KB

how-to-run.adoc

File metadata and controls

833 lines (636 loc) · 34.2 KB
Raw

Running Omicron

Table of Contents

Omicron is the control plane for the Oxide system. There are a few different ways to run Omicron depending on what resources you have available and how much of the stack you want to run using real components vs. simulated ones. Generally speaking, it’s easier to get things going and automate testing with simulated components, but of course much of the system’s functionality is missing or faked up when using simulated components.

The most common development configurations are:

  1. Using one or more simulated Sled Agents. There are no real VMs. All components listen on localhost and talk to each other directly. The automated tests in this repo generally use this kind of deployment. This is the only mode that’s supported on non-illumos systems (i.e., Linux and MacOS).

  2. Using one or more real Sled Agents (on separate physical machines) using SoftNPU-based Boundary Services. You can provision real VMs this way. Intra-"rack" networking and boundary Services (i.e., external connectivity) are fully functional using SoftNPU, a software-based simulation of the Tofino device that’s normally responsible for these functions.

    Within this mode, you can run on real Oxide hardware ("Gimlets") or ordinary server PCs.

These are historically called "simulated" vs. "non-simulated", though they both involve simulation of some parts of a real Oxide system.

Here’s a summary of the tradeoffs:

"Simulated" deployment "Non-simulated" deployment

Works on

illumos, Linux, MacOS

illumos only

Nexus

Real implementation

Real implementation

CockroachDB

Real implementation, 1-node cluster

Real implementation, multi-node cluster

Internal/External DNS

Real implementation

Real implementation

Crucible Pantry

Real implementation

Real implementation

Sled Agent

Simulated, multiple okay

Real implementation, requires separate machines for each

Propolis

Missing (VMs are faked-up by simulated Sled Agent)

Real implementation

Dendrite

Stub implementation

Simulated implementation

Management Gateway Service (MGS)

Missing

Real implementation

Internal ("rack") networking

Localhost

Real implementation on-sled, simulated implementation across sleds (SoftNPU)

Boundary services (external connectivity)

Missing. Externally-facing Oxide services listen directly on localhost. The VMs are fake, so external connectivity is moot.

Simulated implementation (SoftNPU)

Wicket

Missing

Not used

Management network

Missing

Not used

To run the simulated control plane, refer to the guide on running simulated Omicron. The rest of this document describes how to run a single-Sled Omicron with a real Sled Agent and SoftNPU-based Boundary Services.

There are other configurations besides the ones mentioned here:

  • A real Oxide rack: real hardware with real implementations of all components.

  • A Gimlet in a real Oxide rack, deployed as a single system in isolation from the rest of the rack.

  • A Gimlet on a bench (i.e., not in a rack — requires separate hardware to connect power and networking) connected a Sidecar (the Oxide switch), also on a bench.

  • A Gimlet on a bench with no Sidecar.

This document doesn’t describe how to deploy these cases.

Prerequisites

Bare-metal operating system

This guide assumes that you have a system running Helios on a bare-metal system.[1]

External networking

Two modes of external networking are described here:

  1. You’ll be plugging your Omicron system into an existing IPv4 network (e.g., a home network or a lab network) from which you can allocate a few IP addresses that won’t be used elsewhere on the network. The existing network will be used as the "external" network for the system, meaning that externally-facing services (like the API and console) will use IPs on this network. If you want to be able to reach the the internet from Instances, there must be a gateway on this network that provides access to the internet.

    As an example, in this doc:

    • The network is 192.168.1.0/24.

    • The network’s gateway is 192.168.1.199.

    • You can carve off a range from 192.168.1.20 to 192.168.1.40 for use by the rack:

      • 192.168.1.20 - 192.168.1.29 for externally-facing services provided by the system,

      • 192.168.1.30 as the address used by SoftNPU on the external network, and

      • 192.168.1.31 - 192.168.1.40 as the addresses used for Instances that need some public IPs (even if just for NAT to the internet).

  2. Alternatively, you’ll set up an "external" network that only exists on your test machine. If you go this route, we’ll choose 192.168.1.0/24 and all the same other details as in the case above, just for convenience, and it happens to match what is in the non-gimlet.toml file. In this mode, you’ll need to create your made-up network, give the global zone an IP address on it, and set up IPv4 forwarding and address translation (NAT) so that the NTP zone and any instances can get out to the outside world. We’ll use 192.168.1.199 for the GZ interface.

ℹ️
 In the two map lines, replace igb0 with the name of your machine’s physical interface that connects to the outside world. 
$ pfexec dladm create-etherstub -t fake_external_stub0
$ pfexec dladm create-vnic -t -l fake_external_stub0 fake_external0
$ pfexec ipadm create-if -t fake_external0
$ pfexec ipadm create-addr -t -T static --address 192.168.1.199 fake_external0/external
$ echo "map igb0 192.168.1.0/24 -> 0/32 portmap tcp/udp auto" > /tmp/ipnat.conf
$ echo "map igb0 192.168.1.0/24 -> 0/32" >> /tmp/ipnat.conf
$ pfexec cp /tmp/ipnat.conf /etc/ipf/ipnat.conf
$ pfexec routeadm -e ipv4-forwarding -u
$ svcadm enable ipfilter

Other network configurations are possible but beyond the scope of this doc.

When making this choice, note that in order to use the system once it’s set up, you will need to be able to access it from a web browser. If you go with option 2 here, you may need to use an SSH tunnel (see: Setting up an SSH tunnel for console access) or the like to do this.

Picking a "machine" type

Omicron packages (discussed in more detail below) are associated with a particular machine type, which is one of:

  • gimlet (real Oxide hardware deployed in a real Oxide rack with a bunch of other Gimlets that together form a multi-sled system)

  • gimlet-standalone (real Oxide server hardware deployed in a real Oxide rack, but running as a separate single-node system)

  • non-gimlet (some kind of PC running as a single-machine "rack"; can potentially also be used for Gimlet running on the bench?)

The main difference are the configuration files used for the Sled Agent and Rack Setup Service (RSS).

Prerequisite software

The steps below will install several executables that will need to be in your PATH. You can set that up first using:

$ source env.sh

(You’ll want to do this in the future in every shell where you work in this workspace.)

Then install prerequisite software with the following script:

$ pfexec ./tools/install_prerequisites.sh

You need to do this step once per workspace and potentially again each time you fetch new changes. If the script reports any PATH problems, you’ll need to correct those before proceeding.

This script expects that you are both attempting to compile code and execute it on the same machine. If you’d like to have a different machine for a "builder" and a "runner", you can use the two more fine-grained scripts:

# To be invoked on the machine building Omicron
$ ./tools/install_builder_prerequisites.sh
# To be invoked on the machine running Omicron
$ ./tools/install_runner_prerequisites.sh

Again, if these scripts report any PATH problems, you’ll need to correct those before proceeding.

The rest of these instructions assume that you’re building and running Omicron on the same machine.

Build and deploy Omicron

Set up virtual hardware

The Sled Agent supports operation on both:

  • a Gimlet (i.e., real Oxide hardware), and

  • an ordinary PC running illumos that’s been set up to look like a Gimlet using cargo xtask virtual-hardware create (described next).

This script also sets up a "softnpu" zone to implement Boundary Services. SoftNPU simulates the Tofino device that’s used in real systems. Just like Tofino, it can implement sled-to-sled networking, but that’s beyond the scope of this doc.

If you’re running on a PC and using either of the networking configurations mentioned above, you can usually just run this script with a few argumnets set. These arguments tell SoftNPU about your local network. You will need the gateway for your network as well as the whole range of IPs that you’ve carved out for the Oxide system (see [_external_networking] above):

cargo xtask virtual-hardware create
    --gateway-ip 192.168.1.199     # The gateway IP address for your local network (see above)
    --pxa-start 192.168.1.20       # The first IP address your Oxide cluster can use (see above)
    --pxa-end 192.168.1.40         # The last IP address your Oxide cluster can use (see above)

If you’re using the fake sled-local external network mentioned above, then you’ll need to set --physical-link:

    --physical-link fake_external_stub0    # The etherstub for the fake external network

If you’re using an existing external network, you likely don’t need to specify anything here because the script will choose one. You can specify a particular one if you want, though:

    --physical-link igb0           # The physical link for your external network.

If you’re running on a bench Gimlet, you may not need (or want) most of what cargo xtask virtual-hardware create does, but you do still need SoftNPU. You can tweak what resources are created with the --scope flag.

Later, you can clean up the resources created by cargo xtask virtual-hardware create with:

$ cargo xtask virtual-hardware destroy

If you’ve done all this before and Omicron is still running, these resources will be in use and this script will fail. Uninstall Omicron (see below) before running this script.

Create a TLS certificate for the external API

You can skip this step. In that case, the externally-facing services (API and console) will run on insecure HTTP.

You can generate a self-signed TLS certificate chain with:

$ cargo run --bin=omicron-dev -- cert-create ./smf/sled-agent/$MACHINE/initial-tls- '*.sys.oxide.test'

Rack setup configuration

The relevant configuration files are in ./smf/sled-agent/$MACHINE. Start with config-rss.toml in one of those directories. There are only a few parts you need to review:

[[internal_services_ip_pool_ranges]]
first = "192.168.1.20"
last = "192.168.1.29"

This is a range of IP addresses on your external network that Omicron can assign to externally-facing services (like DNS and the API). You’ll need to change these if you’ve picked different addresses for your external network. See [_external_networking] above for more on this.

You will also need to update route information if your $GATEWAY_IP differs from the default. The below example demonstrates a single static gateway route; in-depth explanations for testing with BGP can be found in the Network Preparations guide and the Configuring BGP guide:

# Configuration to bring up boundary services and make Nexus reachable from the
# outside.  This block assumes that you're following option (2) above: putting
# your Oxide system on an existing network that you control.
[rack_network_config]
# An internal-only IPv6 address block which contains AZ-wide services.
# This does not need to be changed.
rack_subnet = "fd00:1122:3344:0100::/56"
# A range of IP addresses used by Boundary Services on the network.  In a real
# system, these would be addresses of the uplink ports on the Sidecar.  With
# softnpu, only one address is used.
infra_ip_first = "192.168.1.30"
infra_ip_last = "192.168.1.30"

# Configurations for BGP routers to run on the scrimlets.
# This array can typically be safely left empty for home/local use,
# otherwise this is a list of { asn: u32, originate: ["<v4 network>"] }
# structs which will be be inserted when Nexus is started by sled-agent.
# See the 'Network Preparations' guide linked above.
bgp = []

[[rack_network_config.ports]]
# Routes associated with this port.
# NOTE: The below `nexthop` should be set to $GATEWAY_IP for your configuration
routes = [{nexthop = "192.168.1.199", destination = "0.0.0.0/0"}]
# Addresses associated with this port.
# For softnpu, an address within the "infra" block above that will be used for
# the softnpu uplink port.  You can just pick the first address in that pool.
addresses = ["192.168.1.30/24"]
# Name of the uplink port.  This should always be "qsfp0" when using softnpu.
port = "qsfp0"
# The speed of this port.
uplink_port_speed = "40G"
# The forward error correction mode for this port.
uplink_port_fec="none"
# Switch to use for the uplink. For single-rack deployments this can be
# "switch0" (upper slot) or "switch1" (lower slot). For single-node softnpu
# and dendrite stub environments, use "switch0"
switch = "switch0"
# Neighbors we expect to peer with over BGP on this port.
# see: common/src/api/internal/shared.rs – BgpPeerConfig
bgp_peers = []

In some configurations (not the one described here), it may be necessary to update smf/sled-agent/$MACHINE/config.toml:

# An optional data link from which we extract a MAC address.
# This is used as a unique identifier for the bootstrap address.
#
# If empty, this will be equivalent to the first result from:
# $ dladm show-phys -p -o LINK
# data_link = "igb0"

# On a multi-sled system, transit-mode Maghemite runs in the `oxz_switch` zone
# to configure routes between sleds.  This runs over the Sidecar's rear ports
# (whether simulated with SoftNPU or not).  On a Gimlet deployed in a rack,
# tfportd will create the necessary links and Maghemite will be configured to
# use those.  But on non-Gimlet systems, you need to specify physical links to
# be passed into the `oxz_switch` zone for this purpose.  You can skip this if
# you're deploying a single-sled system.
# switch_zone_maghemite_links = ["ixgbe0", "ixgbe1"]

Build Omicron packages

The omicron-package tool builds Omicron and bundles all required files into packages that can be copied to another system (if necessary) and installed there. This tool acts on package-manifest.toml, which describes the contents of the packages.

Packages have a notion of "build targets", which are used to select between different variants of certain components. A build target is composed of an image type, a machine type, and a switch type:

$ cargo run --release --bin omicron-package -- target create -h
    Finished release [optimized] target(s) in 0.70s
     Running `target/release/omicron-package target create -h`
Error: Creates a new build target, and sets it as "active"

Usage: omicron-package target create [OPTIONS]

Options:
  -i, --image <IMAGE>
          [default: standard]

          Possible values:
          - standard:   A typical host OS image
          - trampoline: A recovery host OS image, intended to bootstrap a Standard image

  -m, --machine <MACHINE>
          Possible values:
          - gimlet:            Use sled agent configuration for a Gimlet
          - gimlet-standalone: Use sled agent configuration for a Gimlet running in isolation
          - non-gimlet:        Use sled agent configuration for a device emulating a Gimlet

  -s, --switch <SWITCH>
          Possible values:
          - asic:    Use the "real" Dendrite, that attempts to interact with the Tofino
          - stub:    Use a "stub" Dendrite that does not require any real hardware
          - softnpu: Use a "softnpu" Dendrite that uses the SoftNPU asic emulator

  -r, --rack-topology <RACK_TOPOLOGY>
          Possible values:
          - multi-sled:  Use configurations suitable for a multi-sled deployment, such as dogfood and production racks
          - single-sled: Use configurations suitable for a single-sled deployment, such as CI and dev machines

  -h, --help
          Print help (see a summary with '-h')

To set up a build target for a non-Gimlet machine with simulated (but fully functional) external networking, you would run:

$ cargo run --release --bin omicron-package -- -t default target create -i standard -m non-gimlet -s softnpu -r single-sled
    Finished release [optimized] target(s) in 0.66s
     Running `target/release/omicron-package -t default target create -i standard -m non-gimlet -s softnpu -r single-sled`
Created new build target 'default' and set it as active
ℹ️
 The target create command will set the new target as active and thus let you omit the -t flag in subsequent commands.

To kick off the build and package everything up, you can run:

$ cargo run --release --bin omicron-package -- package

This will package up all the packages defined in the manifest that are selected by the active build target. Packing involves building software from this repo, downloading prebuilt pieces from elsewhere, and assembling the results into tarballs. The final artifacts will be placed in a target directory of your choice (by default, out/) ready to be unpacked as services.

ℹ️
 Running in release mode isn’t strictly required, but improves the performance of the packaging tools significantly.
ℹ️
 Instead of package you can also use the check subcommand to essentially run cargo check without building or creating packages.

Installing

To install the services on a target machine:

$ cargo build --release --bin omicron-package
$ pfexec ./target/release/omicron-package install
⚠️

Do not use pfexec cargo run directly; it will cause files in ~/.cargo and target/ to be owned by root, which will cause problems down the road.

If you’ve done this already, and you wish to recover, run from the root of this repository pfexec chown -R $USER:$(id -ng $USER) target ${CARGO_HOME:-~/.cargo}.

This command installs an SMF service called svc:/oxide/sled-agent:default, which itself starts the other required services. This will take a few minutes. You can watch the progress by looking at the Sled Agent log:

$ tail -F $(svcs -L sled-agent)

(You may want to pipe that to looker for better readability.)

You can also list the zones that have been created so far:

# View zones managed by Omicron (prefixed with "oxz_"):
$ zoneadm list -cnv

# View logs for a service:
$ pfexec tail -f $(pfexec svcs -z oxz_nexus_<UUID> -L nexus)

Using Omicron

At this point, the system should be up and running! You should be able to reach the external API and web console from your external network. But how? The URL for the API and console will be:

  • http:// / https:// (depending on whether you provided TLS certificates in the steps above)

  • recovery (assuming you did not change the default recovery Silo name)

  • .sys.

  • oxide.test (assuming you did not change the delegated DNS domain).

This won’t be in public DNS, though. You’d need to be using the deployed system’s external DNS servers as your DNS server for things to "just work".[2] You can query them directly:

$ dig recovery.sys.oxide.test @192.168.1.20 +short
192.168.1.21

Where did 192.168.1.20 come from? That’s the external address of the external DNS server. We knew that because it’s listed in the external_dns_ips entry of the config-rss.toml file we’re using.

Having looked this up, the easiest thing will be to use http://192.168.1.21 for your URL (replacing with https if you used a certificate, and replacing that IP if needed). If you’ve set up networking right, you should be able to reach this from your web browser. You may have to instruct the browser to accept a self-signed TLS certificate. See also Connecting securely with TLS using the CLI.

Setting up an SSH tunnel for console access

If you set up a fake external network (method 2 in External networking), one way to be able to access the console of your deployment is by setting up an SSH tunnel. Console access is required to use the CLI for device authentication. The following is an example of how to access the console with an SSH tunnel.

Nexus serves the console, so first get a nexus IP from the instructions above.

In this example, Omicron is running on the lab machine dunkin. Usually, you’ll want to set up the tunnel from the machine where you run a browser, to the machine running Omicron. In this example, one would run this on the machine running the browser:

$ ssh -L 1234:192.168.1.22:80 dunkin.eng.oxide.computer

The above command configures ssh to bind to the TCP port 1234 on the machine running the browser, forward packets through the ssh connection, and redirect them to 192.168.1.22 port 80 as seen from the other side of the connection.

Now you should be able to access the console from the browser on this machine, via something like: 127.0.0.1:1234, using the port from the ssh command.

Using the CLI

Follow the instructions to set up the Oxide CLI. See the previous section to find the URL for the API. Then you can log in with:

oxide auth login --host http://192.168.1.21

Configure quotas for your silo

Setting resource quotas is required before you can begin uploading images, provisioning instances, etc. In this example we’ll update the recovery silo so we can provision instances directly from it:

$ oxide api /v1/system/silos/recovery/quotas --method PUT --input - <<EOF
{
  "cpus": 9999999999,
  "memory": 999999999999999999,
  "storage": 999999999999999999
}
EOF

# example response
{
  "cpus": 9999999999,
  "memory": 999999999999999999,
  "silo_id": "fa12b74d-30f8-4d5a-bc0e-4d229f13c6e5",
  "storage": 999999999999999999
}

Create an IP pool

An IP pool is needed to provide external connectivity to Instances. The addresses you use here should be addresses you’ve reserved from the external network (see [_external_networking]).

Here we will first create an ip pool for the recovery silo:

---
$ oxide api /v1/system/ip-pools --method POST --input - <<EOF
{
  "name": "default",
  "description": "default ip-pool"
}
EOF

example response

{ "description": "default ip-pool", "id": "1c3dfa5c-7b00-46ff-987a-4e59e512b250", "name": "default", "time_created": "2024-01-16T22:51:54.679751Z", "time_modified": "2024-01-16T22:51:54.679751Z" } ---

Now we will associate the pool with the recovery silo.

---
$ oxide api /v1/system/ip-pools/default/silos --method POST --input - <<EOF
{
  "silo": "recovery",
  "is_default": true
}
EOF

example response

{ "ip_pool_id": "1c3dfa5c-7b00-46ff-987a-4e59e512b250", "is_default": true, "silo_id": "5c0aca09-d7ee-4be6-b7b1-060655659f74" } ---

Now we will add an address range to the recovery silo:

oxide api /v1/system/ip-pools/default/ranges/add --method POST --input - <<EOF
{
  "first": "$IP_POOL_START",
  "last": "$IP_POOL_END"
}
EOF

# example response
{
  "id": "6209516e-2b38-4cbd-bff4-688ffa39d50b",
  "ip_pool_id": "1c3dfa5c-7b00-46ff-987a-4e59e512b250",
  "range": {
    "first": "192.168.1.35",
    "last": "192.168.1.40"
  },
  "time_created": "2024-01-16T22:53:43.179726Z"
}

Create a Project and Image

First, create a Project:

$ oxide project create --name=myproj --description demo

Create a Project Image that will be used as initial disk contents.

This can be the alpine.iso image that ships with propolis:

$ oxide api /v1/images?project=myproj --method POST --input - <<EOF
{
  "name": "alpine",
  "description": "boot from propolis zone blob!",
  "os": "linux",
  "version": "1",
  "source": {
    "type": "you_can_boot_anything_as_long_as_its_alpine"
  }
}
EOF

Or an ISO / raw disk image / etc hosted at a URL:

$ oxide api /v1/images --method POST --input - <<EOF
{
  "name": "crucible-tester-sparse",
  "description": "boot from a url!",
  "os": "debian",
  "version": "9",
  "source": {
    "type": "url",
    "url": "http://[fd00:1122:3344:101::15]/crucible-tester-sparse.img",
    "block_size": 512
  }
}
EOF

Provision an instance using the CLI

You’ll need the id $IMAGE_ID of the image you just created. You can fetch that with oxide image view --image $IMAGE_NAME.

Now, create a Disk from that Image. The disk size must be a multiple of 1 GiB and at least as large as the image size. The example below creates a disk using the image made from the alpine ISO that ships with propolis, and sets the size to the next 1GiB multiple of the original alpine source:

$ oxide api /v1/disks?project=myproj --method POST --input - <<EOF
{
  "name": "alpine",
  "description": "alpine.iso blob",
  "block_size": 512,
  "size": 1073741824,
  "disk_source": {
      "type": "image",
      "image_id": "$IMAGE_ID"
  }
}
EOF

Now we’re ready to create an Instance, attaching the alpine disk created above:

$ oxide api /v1/instances?project=myproj --method POST --input - <<EOF
{
  "name": "myinst",
  "description": "my inst",
  "hostname": "myinst",
  "memory": 1073741824,
  "ncpus": 2,
  "disks": [
    {
      "type": "attach",
      "name": "alpine"
    }
  ],
  "external_ips": [{"type": "ephemeral"}]
}
EOF

Attach to the serial console

You can attach to the proxied propolis server serial console. You’ll need the id returned from the previous command, which we’ll call $INSTANCE_ID:

$ oxide instance serial console --instance $INSTANCE_ID

Cleaning up

To uninstall all Omicron services from a machine:

$ cargo build --release --bin omicron-package
$ pfexec ./target/release/omicron-package uninstall

Once all the Omicron services are uninstalled, you can also remove the previously created virtual hardware as mentioned above:

$ cargo xtask virtual-hardware destroy

More information

Connecting securely with TLS using the CLI

If you provided TLS certificates during setup, you can connect securely to the API. But you’ll need to be accessing it via its DNS name. That’s usually hard because in development, you’re not using a real top-level domain that’s in public DNS. Both curl(1) and the Oxide CLI provide (identical) flags that can help here:

$ curl -i --resolve recovery.sys.oxide.test:443:192.168.1.21 --cacert ./smf/sled-agent/$MACHINE/initial-tls-key.pem https://recovery.sys.oxide.test
$ oxide --resolve recovery.sys.oxide.test:443:192.168.1.21 --cacert ./smf/sled-agent/$MACHINE/initial-tls-key.pem auth login --host https://recovery.sys.oxide.test

Switch Zone

In a real rack, two of the Gimlets (referred to as Scrimlets) will be connected directly to the switch (Sidecar). Those sleds will thus be configured with a switch zone (oxz_switch) used to manage the switch. The sled_mode option in Sled Agent’s config will indicate whether the sled its running on is potentially a Scrimlet or Gimlet.

The relevant config will be in smf/sled-agent/$MACHINE/config.toml.

# Identifies whether sled agent treats itself as a scrimlet or a gimlet.
#
# If this is set to "scrimlet", the sled agent treats itself as a scrimlet.
# If this is set to "gimlet", the sled agent treats itself as a gimlet.
# If this is set to "auto":
# - On illumos, the sled automatically detects whether or not it is a scrimlet.
# - On all other platforms, the sled assumes it is a gimlet.
sled_mode = "scrimlet"

Once Sled Agent has been configured to run as a Scrimlet (whether explicitly or implicitly), it will attempt to create and start the switch zone. This will depend on the switch type that was specified in the build target:

  1. asic implies we’re running on a real Gimlet and are directly attached to the Tofino ASIC.

  2. stub provides a stubbed out switch implementation that doesn’t require any hardware.

  3. softnpu provides a simulated switch implementation that runs the same P4 program as the ASIC, but in software.

For the purposes of local development, the softnpu switch is used. Unfortunately, Omicron does not currently automatically configure the switch with respect to external networking, so you’ll need to manually do so.

Test Environment

The components of Omicron are deployed into separate zones that act as separate hosts on the network, each with their own address. Since this network is private to the deployment, we can use the same IPv6 prefix in all development deployments and even hardcode the IPv6 addresses of each component. If you’d like to modify these values to suit your local network, you can modify them within the smf/ subdirectory.

Service Endpoint

Sled Agent: Bootstrap

Derived from MAC address of physical data link.

Sled Agent: Dropshot API

[fd00:1122:3344:0101::1]:12345

Switch Zone

[fd00:1122:3344:0101::2]

Cockroach DB

[fd00:1122:3344:0101::3]:32221

Nexus: Internal API

[fd00:1122:3344:0101::4]:12221

Oximeter

[fd00:1122:3344:0101::5]:12223

Clickhouse

[fd00:1122:3344:0101::6]:8123

Crucible Downstairs 1

[fd00:1122:3344:0101::7]:32345

Crucible Downstairs 2

[fd00:1122:3344:0101::8]:32345

Crucible Downstairs 3

[fd00:1122:3344:0101::9]:32345

Internal DNS Service

[fd00:1122:3344:0001::1]:5353

External DNS

192.168.1.20:53

Nexus: External API

192.168.1.21:80

Note that Sled Agent runs in the global zone and is the one responsible for bringing up all the other other services and allocating them with VNICs and IPv6 addresses.

Building host images

Host images for both the standard Omicron install and the trampoline/recovery install are built as a part of CI. To build them locally, first run the CI script:

$ ./.github/buildomat/jobs/package.sh

This will create a /work directory with a few tarballs in it. Building a host image requires a checkout of helios; the instructions below use $HELIOS_PATH for the path to this repository.

To build a standard host image:

$ ./tools/build-host-image.sh -B $HELIOS_PATH /work/global-zone-packages.tar.gz

To build a recovery host image:

$ ./tools/build-host-image.sh -R $HELIOS_PATH /work/trampoline-global-zone-packages.tar.gz

Running oximeter in standalone mode

oximeter is the program used to collect metrics from producers in the control plane. Normally, the producers register themselves with nexus, which creates a durable assignment between the producer and an oximeter collector in the database. That allows components to survive restarts, while still producing metrics.

To ease development, oximeter can be run in "standalone" mode. In this case, a mock nexus server is started, with only the minimal subset of the internal API needed to register producers and collectors. Neither CockroachDB nor ClickHouse is required, although ClickHouse can be used, if one wants to see how data is inserted into the database.

To run oximeter in standalone, use:

$ cargo run --bin oximeter -- standalone

The producer should still register with nexus as normal, which is usually done with an explicit IP address and port. This defaults to [::1]:12221.

When run this way, oximeter will print the samples it collects from the producers to its logs, like so:

Sep 26 17:48:56.006 INFO sample: Sample { measurement: Measurement { timestamp: 2023-09-26T17:48:56.004565890Z, datum: CumulativeF64(Cumulative { start_time: 2023-09-26T17:48:45.997404777Z, value: 10.007154703 }) }, timeseries_name: "virtual_machine:cpu_busy", target: FieldSet { name: "virtual_machine", fields: {"instance_id": Field { name: "instance_id", value: Uuid(564ef6df-d5f6-4204-88f7-5c615859cfa7) }, "project_id": Field { name: "project_id", value: Uuid(2dc7e1c9-f8ac-49d7-8292-46e9e2b1a61d) }} }, metric: FieldSet { name: "cpu_busy", fields: {"cpu_id": Field { name: "cpu_id", value: I64(0) }} } }, component: results-sink, collector_id: 78c7c9a5-1569-460a-8899-aada9ad5db6c, component: oximeter-standalone, component: nexus-standalone, file: oximeter/collector/src/lib.rs:280
Sep 26 17:48:56.006 INFO sample: Sample { measurement: Measurement { timestamp: 2023-09-26T17:48:56.004700841Z, datum: CumulativeF64(Cumulative { start_time: 2023-09-26T17:48:45.997405187Z, value: 10.007154703 }) }, timeseries_name: "virtual_machine:cpu_busy", target: FieldSet { name: "virtual_machine", fields: {"instance_id": Field { name: "instance_id", value: Uuid(564ef6df-d5f6-4204-88f7-5c615859cfa7) }, "project_id": Field { name: "project_id", value: Uuid(2dc7e1c9-f8ac-49d7-8292-46e9e2b1a61d) }} }, metric: FieldSet { name: "cpu_busy", fields: {"cpu_id": Field { name: "cpu_id", value: I64(1) }} } }, component: results-sink, collector_id: 78c7c9a5-1569-460a-8899-aada9ad5db6c, component: oximeter-standalone, component: nexus-standalone, file: oximeter/collector/src/lib.rs:280
1. You can in principle use a VM, but you wouldn’t be able to provision Instances because nested virtualization is not supported.
2. If you did this, everything else would be broken because the Omicron-provided DNS servers do not serve any domains except the ones operated by Omicron.