Skip to content

Latest commit

 

History

History
322 lines (253 loc) · 14.5 KB

CHANGLELOG.md

File metadata and controls

322 lines (253 loc) · 14.5 KB
Raw

openHASP Changelog

v0.7.0

!!! THE PARTITION SCHEME OF THE INTERNAL FLASH HAS CHANGED, CHECK THE DOCS BEFORE UPGRADING !!!

Commands

  • Removed deprecated dim, brightness and light commands, use backlight instead

Objects

  • action and swipe can now be set to any command
  • Set default line_width of new line objects to 1
  • Allow line and block comments in pages.jsonl
  • Removed deprecated txt property, use text instead
  • Removed deprecated objid property, use obj instead
  • HASP theme: Toggle objects now use the secondary color when they are in the toggled state.

Fonts

  • Firmware files include the bitmapped font sizes 12, 16, 24 and 32pt
  • Use embedded TrueType font for other font sizes (PSram highly recommended)
  • Add glyphs from Cyrillic, Latin-2, Greek and Viernamese character sets to default fonts

Web UI

  • Update Web UI to petite-vue app
  • Redesigned the File Editor

Services

  • Change MQTT client from PubSubClient to asynchronic Espressif esp_mqtt client
  • Make the MQTT topics configurable
  • MQTT discovery now uses a subtopic of hasp/discovery. Discovery requires version 0.7.x of the Custom Component.
  • Add service start/stop mqtt
  • Add SimpleFTPServer to easily upload and download files to the plate (one simultanious connection only)
  • Add service start/stop ftp
  • Add configuration for NTP servers and timezone

Devices

  • Add GS-T3E Smart Panel
  • Add Lilygo Ttgo Lily Pi ESP32
  • Add Makerfabs ESP32-S3 SPI
  • Add Sunton ESP32-S3 TFT 4.3", 5.0" and 7.0"
  • Add Sunton ESP32-2432S028R ESP32-3248S035C ESP32-3248S035R
  • Add support for Wireless-Tag WT32-SC01 Plus and WT-86-32-3ZW1

Bug fixes

  • Fix for first touch not working properly
  • Add button GPIOs to input discovery message

Architecture

  • Moved to Tasmota Arduino 2.0.10 and ESP-IDF 4.4.5 (thanks @Jason2866)
  • Add Arduino-GFX display driver
  • Add support for ESP32-S3 devices
  • Deprication of support for ESP32-S2 devices due to lack of sRAM

Updated libraries to ArduinoJson 6.21.2, ArduinoStreamUtils 1.7.0, TFT_eSPI 2.5.0, LovyanGFX 1.1.7 and SimpleFTPServer 2.1.5

v0.6.3

Commands

  • Additional idle parameters now accept off, short and long
  • Add sensors command to trigger the sensors state message
  • Run L:/boot.cmd when the plate is (re)booted if the script exists
  • You can now use the pXbY.jsonl command to update multiple object properties at once (thanks @nagyrobi)

Objects

  • All objects have a custom tag property which can contain arbitrary JSON data (or numbers or text) (thanks @nagyrobi)
  • img.src now accepts both http and https urls (thanks @htvekov)
  • img.src now accepts png and binary image urls, PSram is highly recommended
  • img.src now accepts 16-bit BMP files stored in flash

Web UI

  • Updated to modern responsive design (requires JavaScript)
  • Add /api/info/ and /api/config/*/ endpoints
  • Allow for a customizible vars.css, style.css, script.js and edit.htm
  • Display a message when the configuration is changed and a reboot is needed
  • Add checkbox for backlight inversion to Display settings (thanks @wolffman122)
  • Add checkbox to toggle ANSI codes #261 (thanks @geiseri)
  • Allow firmware upgrade/downgrade in AP mode

GUI

  • antiburn displays random pixels aka. white noise
  • Hide cursor during antiburn and idle if the pointer is enabled

MQTT

  • Remember last page id of jsonl messages. Sending multiple messages now behaves like jsonl files (thanks @arovak)

Fonts

  • Use TrueType fonts from flash, PSram is highly recommended (thanks to @s-hadinger)
  • Custom LVGL binary fonts can be read from flash and loaded into memory, PSram is highly recommended
  • Font ID is replaced by namexx (where xx is the font size) but the previous Font IDs still work for backwards compatibility
  • Added build option for Vietnamese character set (thanks @kydang789)
  • ⚠️ Breaking: Removed defunct .zi font support!

Bug fixes

  • Fixed Lanbon L8 v1.17 PCB screen corruption #316 (thanks @DJBenson)- Fix for screenshots not showing properly in Safari on macOS/iOS (thanks @masto)
  • Fix bug that would not accept on state for setting output GPIOs #275 (thanks @freshnas and @cerietke)
  • Fix a bug in dropdownlist were close method performed open instead #299 (thanks @htvekov)
  • Fix src bug in img objects that could corrupt images sent over http (thanks @htvekov)
  • Fix screen dimensions in statusupdate message, taking into account current orientation #278 (thanks @kquinsland)
  • Fix for HTTP password that could be overwritten by 8 asterisks when it was not changed in the web UI
  • Fixed MQTT hostname limit again... #304 (thanks @fake-name)
  • Fixed firmware upgrade from URL #300 (thank @nagyrobi)
  • Fixed a bug that prevented Wifi from connecting to different BSSID #330 (thanks @Braehead)
  • Syslog message format fixes and improvements #285 (thanks @geiseri)

Custom component

  • Expose antiburn and page in the CC (thanks @dgomes)
  • Expose the device URL in discovery message and CC

Architecture

  • Moved to Tasmota Arduino 2.0.3 with native LittleFS library (thanks @Jason2866) and ESP-IDF 4.4.1 fixes for FragAttacks CVEs (thanks @nagyrobi)
  • Add support for ESP32-S2 devices
  • ⚠️ Breaking: Removed support for ESP8266!

Updated libraries to ArduinoJson 6.19.4, ArduinoStreamUtils 1.6.3, AceButton 1.9.2, TFT_eSPI 2.4.61, LovyanGFX 0.4.17 and Adafruit STMPE610 1.1.4

v0.6.2

Initial Setup

  • Add Captive Portal to first time setup (thanks @AndreTeixeira1998)
  • Create default pages.jsonl, online.cmd and offline.cmd files if they don't exist (thanks @nagyrobi)

Objects

  • Enable click by default on image object
  • Add type to spinner object
  • Add zoom, angle, pivot_x, pivot_y and antialias attributes to image object
  • Allow url as src of image object for raw webimages and from push image service from the CC (thanks @dgomes and @nagyrobi)
  • Use L:/file.png instead of /littlefs/file.png for image paths, /littlefs/ still works for backwards compatibility

Objects

  • Add antiburn command to prevent static parts of the screen to create a ghosting effect in some LCDs or conditions

Devices

  • Add Analog touch driver for Unoshield displays (thanks @wesleygas)
  • Add AZ-Touch MOD ESP32 with 2.4" or 2.8"
  • Add Lilygo®Ttgo Pi ESP32 with TFT 3.5"
  • Add Waveshare ESP32 One development board with Rpi MHS4001(B) or Waveshare RPi(C) LCD display
  • Add D1-R32 ESP32 development board with with Waveshare ILI9486 Touch Shield

Bug fixes

  • Fix bug that caused a crash when both btnmatrix and msgbox where used (thanks @AndreTeixeira1998)
  • Fix L8-HD dimmer brightness initialization after a reboot (thanks @Stupco)
  • Keep last dimmer value when toggling dimmer state on/off
  • Fix configurable mqttPort (thanks @Qargh)
  • Fix opaque background of spinner object in HASP theme (thanks @nagyrobi)

Updated libraries to AceButton 1.9.1 and ArduinoJson 6.18.5

v0.6.1

Commands

  • Add run command to execute script files (.cmd or .jsonl)
  • Add unzip command for no-compression zip files
  • Add service command to start/stop a service

Wifi

  • Don't reboot the plate anymore after prolonged wifi connection lost
  • Run /online.cmd or /offline.cmd script when the wifi status changed

Objects

Devices

Fonts

Compiling

  • Allow custom bootlogo
  • Selectively start http, telnet or console at boot
  • Updated AceButton to 1.9.0 and ArduinoJson to 6.18.3

v0.6.0

Commands:

  • Obsolete dim and light commands, use backlight command instead
  • Add discovery command to facilitate HA CC discovery
  • Add idle command to retreive idle state, replaces wakeup command
  • Updated moodlight command with brightness support
  • Rewrite outputX and add inputX command

Objects:

  • lmeter object renamed to linemeter
  • align values are now left, right, center instead of numbers (numbers can still be used)
  • Added ext_click_h and ext_click_v attributes to extend the clickable area
  • Added clear method to remove only the child objects from an object
  • New tabview, tab, calendar and msgbox objects
  • Add img object with png support (needs PSram for any sizable images)
  • Added missing properties of the spinner object

Web UI:

  • Updated GPIO configuration pages
  • Include a File Editor on ESP32: Create, Edit, Upload, Delete and Apply pages.jsonl (Thanks Cossie)
  • Cache css, favicon and edit.htm.gz in the browser
  • New Information page layout, including MQTT message counters for sent, received and failed

MCU:

  • Allow longer wifi ssid and password
  • Update partition boundaries to use all remaining space for lfs filesystem
  • Speed improvement: keep LVGL functions in fast memory & reduce overhead in main loop
  • Use ascii characterset for WT32-SC01 due to limited flash size

GPIO rewrite:

  • Better handling of gpios
  • Support for Lanbon L8-HD dimmer (EU and AU version, thanks to @Stupco)
  • Add moodlight brightness support

Broadcast and Discovery topic (HASP_USE_BROADCAST and HASP_USE_DISCOVERY)

  • Allow dynamic configuration of HA entities using the openHASP Custom Component (thanks @dgomes)
  • Add Manufacturer and Model to statusupdate

Updated libraries to lvgl 7.11.0, ArduinoJson 6.18.0 and TFT_eSPI 2.3.70

Internationalization:

  • Added French language
  • Added Portuguese language (thanks @AndreTeixeira1998 and @dgomes)
  • Added Spanish language (thanks @altersis)

v0.5.1

  • Restore broken config/submodule topics
  • Don't show warning on comment attribute
  • Patched a potential memory leak
  • Added an automatic lv_mem_defrag to free up lvgl memory
  • Allow selection of fonts via user_config_override
  • Allow for longer mqtt configuration strings in user_config_override
  • Allow default HASP_GPIO_TEMPLATE configuration in user_config_override
  • Add manufacturer and model to statusupdate
  • Fixed enabled attribute and added click attribute

v0.5.0

Name changed to openHASP - https://openhasp.haswitchplate.com/

When using HomeAssistant also update the openHASP Custom Component

  • Switch built-in icons from FontAwesome to MaterialDesign icons #139
  • Add built option for other character sets then latin1
  • Built-in Font sizes dependent on screen size
  • Add swipe property to switch pages
  • Add action property for local page navigation
  • Add back, prev, next attributes to pages #114
  • JSON Serialize text in payloads containing text attributes #140
  • Add az-touch-mod-esp32_ili9341 config and allow for TFT_BACKLIGHT_ON set to LOW #131
  • Add FreeTouchDeck and ESP32-Touchdown configs
  • Add roller mode infinite attribute
  • Add btnmatrix toggle and one_check attributes
  • Rework all event handlers to reduce update events and prevent race condition #119 (events have changed!)
  • Add ability to style the selected part of roller object
  • Add scan_method = WIFI_ALL_CHANNEL_SCAN for ESP32, improving multi-AP connection
  • Add warning objid property is obsolete, use obj instead
  • Add warning txt property is obsolete, use text instead
  • Add dark theme build option for web UI
  • Update lvgl and tft_espi library version
  • Update maximum backlight_level from 100 to 255
  • Set default HASP_LOG_LEVEL=LOG_LEVEL_TRACE

v0.4.0

Note: The partition scheme has changed and you will need to reflash the device over serial first.

All data will be erased, so make sure to backup your pages.jsonl, config.json and fonts.

Changes:

  • Provide all-in-one binary files for ESP32 to flash a device over serial using a single .bin file
  • Allow long wifi passwords (#71 thanks @nagyrobi)
  • Wakeup screen on first touch (#80)
  • Reduce slider events (#88)
  • Update events to accommodate the HA Custom Component (by @dgomes)
  • Remove HA auto-discovery in favor of the HA Custom Component
  • Add clearpage all command option
  • Add local page navigation and transitions
  • Add scale properties
  • Add config/gpio command
  • Allow for timezone setting in user_config_override.h (thanks @arovak)
  • Start localizations for NL, HU and RO (thanks @nagyrobi)
  • New prebuild devices:
    • esp32-touchdown (thanks @joelhaasnoot and @dustinwatts)
    • huzzah featherwing 2.4" and 3.5" (thanks @arovak)
    • m5stack-core2
  • Fix zi font crash bug
  • Update setting min/max attributes (#103 thanks @arovak)
  • Native builds for Windows, MacOS and Linux (thanks to @thouters and @dgomes)

v0.3.4

The webserver was not properly started at initial setup, when the device was in AP mode.

v0.3.3

  • Change txt to text. txt is now obsoleted.
  • Initial support for moodlight e.g. Lanbon L8

v0.3.2

  • Add Lanbon L8
  • Add WT32-SC01

v0.3.1

  • Fixes wifi connection issue in OOBE
  • Fixes memory leak in value_str

v0.3.0

First release of compiled .bin files