rush.json

/**
 * This is the main configuration file for Rush.
 * For full documentation, please see https://rushjs.io
 */
{
  "$schema": "https://developer.microsoft.com/json-schemas/rush/v5/rush.schema.json",

  /**
   * NOTE: If you upgrade to a new major version of Rush, you should replace the "v5"
   * path segment in the "$schema" field for all your Rush config files.  This will ensure
   * correct error-underlining and tab-completion for editors such as VS Code.
   */
  "rushVersion": "5.120.2",
  "pnpmVersion": "8.15.7",

  /**
   * Older releases of the Node.js engine may be missing features required by your system.
   * Other releases may have bugs.  In particular, the "latest" version will not be a
   * Long Term Support (LTS) version and is likely to have regressions.
   *
   * Specify a SemVer range to ensure developers use a Node.js version that is appropriate
   * for your repo.
   */
  "nodeSupportedVersionRange": ">=16",

  /**
   * Odd-numbered major versions of Node.js are experimental.  Even-numbered releases
   * spend six months in a stabilization period before the first Long Term Support (LTS) version.
   * For example, 8.9.0 was the first LTS version of Node.js 8.  Pre-LTS versions are not recommended
   * for production usage because they frequently have bugs.  They may cause Rush itself
   * to malfunction.
   *
   * Rush normally prints a warning if it detects a pre-LTS Node.js version.  If you are testing
   * pre-LTS versions in preparation for supporting the first LTS version, you can use this setting
   * to disable Rush's warning.
   */
  // "suppressNodeLtsWarning": false,

  /**
   * If you would like the version specifiers for your dependencies to be consistent, then
   * uncomment this line. This is effectively similar to running "rush check" before any
   * of the following commands:
   *
   *   rush install, rush update, rush link, rush version, rush publish
   *
   * In some cases you may want this turned on, but need to allow certain packages to use a different
   * version. In those cases, you will need to add an entry to the "allowedAlternativeVersions"
   * section of the common-versions.json.
   */
  // "ensureConsistentVersions": true,

  /**
   * Large monorepos can become intimidating for newcomers if project folder paths don't follow
   * a consistent and recognizable pattern.  When the system allows nested folder trees,
   * we've found that teams will often use subfolders to create islands that isolate
   * their work from others ("shipping the org").  This hinders collaboration and code sharing.
   *
   * The Rush developers recommend a "category folder" model, where buildable project folders
   * must always be exactly two levels below the repo root.  The parent folder acts as the category.
   * This provides a basic facility for grouping related projects (e.g. "apps", "libaries",
   * "tools", "prototypes") while still encouraging teams to organize their projects into
   * a unified taxonomy.  Limiting to 2 levels seems very restrictive at first, but if you have
   * 20 categories and 20 projects in each category, this scheme can easily accommodate hundreds
   * of projects.  In practice, you will find that the folder hierarchy needs to be rebalanced
   * occasionally, but if that's painful, it's a warning sign that your development style may
   * discourage refactoring.  Reorganizing the categories should be an enlightening discussion
   * that brings people together, and maybe also identifies poor coding practices (e.g. file
   * references that reach into other project's folders without using Node.js module resolution).
   *
   * The defaults are projectFolderMinDepth=1 and projectFolderMaxDepth=2.
   *
   * To remove these restrictions, you could set projectFolderMinDepth=1
   * and set projectFolderMaxDepth to a large number.
   */
  // "projectFolderMinDepth": 2,
  // "projectFolderMaxDepth": 2,

  /**
   * Today the npmjs.com registry enforces fairly strict naming rules for packages, but in the early
   * days there was no standard and hardly any enforcement.  A few large legacy projects are still using
   * nonstandard package names, and private registries sometimes allow it.  Set "allowMostlyStandardPackageNames"
   * to true to relax Rush's enforcement of package names.  This allows upper case letters and in the future may
   * relax other rules, however we want to minimize these exceptions.  Many popular tools use certain punctuation
   * characters as delimiters, based on the assumption that they will never appear in a package name; thus if we relax
   * the rules too much it is likely to cause very confusing malfunctions.
   *
   * The default value is false.
   */
  // "allowMostlyStandardPackageNames": true,

  /**
   * This feature helps you to review and approve new packages before they are introduced
   * to your monorepo.  For example, you may be concerned about licensing, code quality,
   * performance, or simply accumulating too many libraries with overlapping functionality.
   * The approvals are tracked in two config files "browser-approved-packages.json"
   * and "nonbrowser-approved-packages.json".  See the Rush documentation for details.
   */
  // "approvedPackagesPolicy": {
  //   /**
  //    * The review categories allow you to say for example "This library is approved for usage
  //    * in prototypes, but not in production code."
  //    *
  //    * Each project can be associated with one review category, by assigning the "reviewCategory" field
  //    * in the "projects" section of rush.json.  The approval is then recorded in the files
  //    * "common/config/rush/browser-approved-packages.json" and "nonbrowser-approved-packages.json"
  //    * which are automatically generated during "rush update".
  //    *
  //    * Designate categories with whatever granularity is appropriate for your review process,
  //    * or you could just have a single category called "default".
  //    */
  //   "reviewCategories": [
  //     // Some example categories:
  //     "production", // projects that ship to production
  //     "tools",      // non-shipping projects that are part of the developer toolchain
  //     "prototypes"  // experiments that should mostly be ignored by the review process
  //   ],
  //
  //   /**
  //    * A list of NPM package scopes that will be excluded from review.
  //    * We recommend to exclude TypeScript typings (the "@types" scope), because
  //    * if the underlying package was already approved, this would imply that the typings
  //    * are also approved.
  //    */
  //   // "ignoredNpmScopes": ["@types"]
  // },

  /**
   * If you use Git as your version control system, this section has some additional
   * optional features you can use.
   */
  "gitPolicy": {
    /**
     * Work at a big company?  Tired of finding Git commits at work with unprofessional Git
     * emails such as "beer-lover@my-college.edu"?  Rush can validate people's Git email address
     * before they get started.
     *
     * Define a list of regular expressions describing allowable e-mail patterns for Git commits.
     * They are case-insensitive anchored JavaScript RegExps.  Example: ".*@example\.com"
     *
     * IMPORTANT: Because these are regular expressions encoded as JSON string literals,
     * RegExp escapes need two backspashes, and ordinary periods should be "\\.".
     */
    // "allowedEmailRegExps": [
    //   "[^@]+@users\\.noreply\\.github\\.com",
    //   "travis@example\\.org"
    // ],
    /**
     * When Rush reports that the address is malformed, the notice can include an example
     * of a recommended email.  Make sure it conforms to one of the allowedEmailRegExps
     * expressions.
     */
    // "sampleEmail": "mrexample@users.noreply.github.com",
    /**
     * The commit message to use when committing changes during 'rush publish'.
     *
     * For example, if you want to prevent these commits from triggering a CI build,
     * you might configure your system's trigger to look for a special string such as "[skip-ci]"
     * in the commit message, and then customize Rush's message to contain that string.
     */
    // "versionBumpCommitMessage": "Applying package updates. [skip-ci]"
  },

  "repository": {
    /**
     * The URL of this Git repository, used by "rush change" to determine the base branch for your PR.
     *
     * The "rush change" command needs to determine which files are affected by your PR diff.
     * If you merged or cherry-picked commits from the main branch into your PR branch, those commits
     * should be excluded from this diff (since they belong to some other PR).  In order to do that,
     * Rush needs to know where to find the base branch for your PR.  This information cannot be
     * determined from Git alone, since the "pull request" feature is not a Git concept.  Ideally
     * Rush would use a vendor-specific protocol to query the information from GitHub, Azure DevOps, etc.
     * But to keep things simple, "rush change" simply assumes that your PR is against the "main" branch
     * of the Git remote indicated by the repository.url setting in rush.json.  If you are working in
     * a GitHub "fork" of the real repo, this setting will be different from the repository URL of your
     * your PR branch, and in this situation "rush change" will also automatically invoke "git fetch"
     * to retrieve the latest activity for the remote main branch.
     */
    "url": "https://github.com/priceline/design-system",
    /**
     * The default branch name. This tells "rush change" which remote branch to compare against.
     * The default value is "main"
     */
    "defaultBranch": "main"
    /**
     * The default remote. This tells "rush change" which remote to compare against if the remote URL is
     * not set or if a remote matching the provided remote URL is not found.
     */
    // "defaultRemote": "origin"
  },

  /**
   * Event hooks are customized script actions that Rush executes when specific events occur
   */
  "eventHooks": {
    /**
     * The list of shell commands to run before the Rush installation starts
     */
    "preRushInstall": [
      // "common/scripts/pre-rush-install.js"
    ],

    /**
     * The list of shell commands to run after the Rush installation finishes
     */
    "postRushInstall": [],

    /**
     * The list of shell commands to run before the Rush build command starts
     */
    "preRushBuild": [],

    /**
     * The list of shell commands to run after the Rush build command finishes
     */
    "postRushBuild": []
  },

  /**
   * Rush can collect anonymous telemetry about everyday developer activity such as
   * success/failure of installs, builds, and other operations.  You can use this to identify
   * problems with your toolchain or Rush itself.  THIS TELEMETRY IS NOT SHARED WITH MICROSOFT.
   * It is written into JSON files in the common/temp folder.  It's up to you to write scripts
   * that read these JSON files and do something with them.  These scripts are typically registered
   * in the "eventHooks" section.
   */
  // "telemetryEnabled": false,

  /**
   * Allows creation of hotfix changes. This feature is experimental so it is disabled by default.
   * If this is set, 'rush change' only allows a 'hotfix' change type to be specified. This change type
   * will be used when publishing subsequent changes from the monorepo.
   */
  // "hotfixChangeEnabled": false,

  "projects": [
    {
      "packageName": "pcln-codemods",
      "projectFolder": "packages/codemods",
      "reviewCategory": "packages",
      "shouldPublish": true
    },

    {
      "packageName": "pcln-menu",
      "projectFolder": "packages/menu",
      "reviewCategory": "packages",
      "shouldPublish": true
    },

    // Published Design System packages
    {
      "packageName": "pcln-design-system",
      "projectFolder": "packages/core",
      "shouldPublish": true,
      "cyclicDependencyProjects": ["pcln-icons"]
    },
    {
      "packageName": "pcln-autocomplete",
      "projectFolder": "packages/autocomplete",
      "shouldPublish": true
    },
    {
      "packageName": "pcln-icons",
      "projectFolder": "packages/icons",
      "shouldPublish": true,
      "cyclicDependencyProjects": ["pcln-design-system"]
    },
    {
      "packageName": "pcln-modal",
      "projectFolder": "packages/modal",
      "shouldPublish": true
    },
    {
      "packageName": "pcln-popover",
      "projectFolder": "packages/popover",
      "shouldPublish": true,
      "cyclicDependencyProjects": ["pcln-slider"]
    },
    {
      "packageName": "pcln-slider",
      "projectFolder": "packages/slider",
      "shouldPublish": true
    },
    {
      "packageName": "pcln-carousel",
      "projectFolder": "packages/carousel",
      "shouldPublish": true
    },

    // Applications
    {
      "packageName": "@priceline/storybook",
      "projectFolder": "apps/storybook",
      "shouldPublish": false
    },
    // {
    //   "packageName": "@priceline/docs",
    //   "projectFolder": "apps/docs",
    //   "shouldPublish": false
    // },

    // Internal Tools
    {
      "packageName": "@priceline/babel-preset",
      "projectFolder": "tools/babel-preset",
      "shouldPublish": false
    },
    {
      "packageName": "@priceline/eslint-config",
      "projectFolder": "tools/eslint-config",
      "shouldPublish": false
    },
    {
      "packageName": "@priceline/create-release-notes",
      "projectFolder": "tools/create-release-notes",
      "shouldPublish": false
    },
    {
      "packageName": "@priceline/project-change-analyzer",
      "projectFolder": "tools/project-change-analyzer",
      "shouldPublish": false
    },

    // Heft Rigs
    {
      "packageName": "@priceline/heft-component-rig",
      "projectFolder": "rigs/component",
      "shouldPublish": false
    },

    // Heft plugins
    {
      "packageName": "heft-styled-components-plugin",
      "projectFolder": "heft-plugins/heft-styled-components-plugin",
      "shouldPublish": true
    }
  ]
}