Skip to content

Latest commit

 

History

History
11 lines (8 loc) · 473 Bytes

building-dpdk.md

File metadata and controls

11 lines (8 loc) · 473 Bytes

Building with a DPDK network backend

  1. Setup host to compile DPDK:
    • Ubuntu sudo apt-get install -y build-essential linux-image-extra-$(uname -r$)
  2. Configure the project with DPDK enabled: ./configure.py --mode=release --enable-dpdk
  3. Run ninja-build build/release.

To run with the DPDK backend for a native stack give the seastar application --dpdk-pmd 1 parameter.

You can also configure DPDK as an external package.