Skip to content

Latest commit

 

History

History
289 lines (217 loc) · 10.2 KB

index.md

File metadata and controls

289 lines (217 loc) · 10.2 KB

What is Deptrac?

Deptrac is a static code analysis tool for PHP that helps you communicate, visualize and enforce architectural decisions in your projects. You can freely define your architectural layers over classes and which rules should apply to them.

For example, you can use Deptrac to ensure that bundles/modules/extensions in your project are truly independent of each other to make them easier to reuse.

Deptrac can be used in a CI pipeline to make sure a pull request does not violate any of the architectural rules you defined. With the optional Graphviz formatter you can visualize your layers, rules and violations.

Example: Deptrac analyses Deptrac

Requirements

In order to run Deptrac you need at least PHP 8.1.

You can analyse projects that require an older PHP version as long as nikic/php-parser can parse it.

Installation

You can install Deptrac via Composer. We recommend using the deptrac-shim package for this. Alternatively, you can also use PHIVE or download the PHAR attached to each release on GitHub. This will ensure that Deptrac and its dependencies are bundled together and will not interfere with any of your project's dependencies.

Composer

We strongly advise against using the deptrac package directly as a composer dependency. We update dependencies regularly, which might cause disruptions in your project. Instead, please use the dedicated distribution repository https://github.com/qossmic/deptrac-shim.

When you install Deptrac using the qossmic/deptrac-shim package, you will get the benefit of using the phar installation, but you can use it like any other composer dependency, i.e. you run Deptrac like this:

$ composer require --dev qossmic/deptrac-shim
vendor/bin/deptrac analyse

PHAR

Download the latest deptrac.phar.

You can run the phar file using php:

$ php deptrac.phar analyse

All examples in this documentation, assume you have the deptrac.phar downloaded in your project's root directory as described above.

Feel free to add Deptrac to your PATH (i.e. /usr/local/bin/deptrac) to make it globally available.

$ curl -LS https://github.com/qossmic/deptrac/releases/download/1.0.2/deptrac.phar -o deptrac.phar

# optional
$ sudo chmod +x deptrac.phar
$ sudo mv deptrac.phar /usr/local/bin/deptrac

PHIVE

You can install Deptrac with Phive

phive install -g qossmic/deptrac

and accept the key with fingerprint 41DD E075 4745 9FAE CFA1 7813 B8F6 4013 4AB1 782E.

To upgrade Deptrac use the following command:

phive update -g qossmic/deptrac

Optional Dependency: Graphviz

If you want to create graphical diagrams with your class dependencies, you will also need the dot command provided by Graphviz.

Graphviz can be installed using common package managers:

# for macos + brew
$ brew install graphviz

# for ubuntu and debian
$ sudo apt-get install graphviz

Graphviz is also available for Windows. Install the current stable release and append the binary path on the environment variable Path (e.g. C:\Program Files (x86)\Graphviz2.38\bin).

Getting Started

In order to get started with Deptrac you will need a configuration file. This configuration file is written in YAML and, by default, is stored with the name deptrac.yaml in your project's root directory.

Deptrac can generate a template for you, using the init command.

$ php deptrac.phar init

The main purpose of this file is:

  1. Define in which directories Deptrac will search for classes and which files to exclude.
  2. Define your architectural layers using so-called collectors.
  3. Define a ruleset describing which layers can communicate with each other.

You can find out more about the Core Concepts in the docs.

Configuration

Let's have a look at the generated file:

# deptrac.yaml
deptrac:
  paths:
    - ./src
  exclude_files:
    - '#.*test.*#'
  layers:
    -
      name: Controller
      collectors:
        -
          type: classLike
          value: .*Controller.*
    -
      name: Repository
      collectors:
        -
          type: classLike
          value: .*Repository.*
    -
      name: Service
      collectors:
        -
          type: classLike
          value: .*Service.*
  ruleset:
    Controller:
      - Service
    Service:
      - Repository
    Repository: ~

By default, Deptrac will search your project's src/ directory for classes and will ignore any files and directory having test in it.

We then define three layers by searching for class names in the files found by Deptrac. Any file containing a class with Controller will be grouped in a layer with the same name. The same happens for classes having Repository and Service in their name. It is important to note that the fully qualified class name is used for grouping classes. That means, the collector will take the full namespace with class name into account.

The default ruleset will then allow classes in the Controller-layer to communicate - i.e. use classes from - the Service layer. Classes grouped in the Service layer may not use classes from the Controller layer, but they can use classes from the Repository layer. Classes inside the Repository layer may not use any classes from the other two layers.

You can learn more about the file in the Configuration reference.

Run Deptrac

Once you have set up the config file you can run Deptrac to analyse your code and check for violations. If you use the default configuration file, you can type php deptrac.phar, otherwise you will need to specify which command and config file should be used.

$ php deptrac.phar

# which is equivalent to
$ php deptrac.phar analyse --config-file=deptrac.yaml

If you run php deptrac.phar -v you'll get a more verbose output.

The analyse command runs with a caching mechanism for parsed files by default. This can be disabled with the --no-cache option.

The generated output will roughly look like this:

 -------------------------- --------------------------------------------------------------------------------------------------------------------------------
  Reason                     Repository
 -------------------------- --------------------------------------------------------------------------------------------------------------------------------
  DependsOnDisallowedLayer   examples\MyNamespace\Repository\SomeRepository must not depend on examples\MyNamespace\Controllers\SomeController
                             You are depending on token that is a part of a layer that you are not allowed to depend on. (Controller)
                             /Users/dbr/workspace/qossmic/deptrac/examples/ControllerServiceRepository1/SomeRepository.php:5
 -------------------------- --------------------------------------------------------------------------------------------------------------------------------


 -------------------- -----
  Report
 -------------------- -----
  Violations           1
  Skipped violations   0
  Uncovered            0
  Allowed              4
  Warnings             0
  Errors               0
 -------------------- -----

This is a report generated by Deptrac. At the top you can see a list of violations, if there are any. A violation means, that a layer uses a layer that is prohibited by the configured ruleset. In this case, a class from the Repository layer uses a class from the Controller layer.

The table on the bottom gives you an overview over:

  • how many violations were found.
  • how many violations were skipped, meaning your config contains exceptions. which will not cause Deptrac to return with an error status code, e.g. in CI, when these violations are found.
  • how many classes were found in the directories, that were not assigned to a layer.
  • how many usages between layers were found that do not violate the ruleset.
  • how many warnings where encountered, e.g. because a class is grouped in multiple layers.
  • how many errors were encountered, e.g. when you exclude a violation in your config file but that violation is not encountered.

If the output does not match your expectations please take a look at the debugging commands available in Deptrac.

You can also change the output format itself by using one of the many provided Output Formatters.

Contribute

Deptrac is in active development. We are looking for your suggestions and help to make it better.

Feel free to open an issue if you encounter bugs, have suggestions or would like to add a new feature to Deptrac.

Please feel free to improve this documentation, fix bugs, or work on a suggested feature by making a pull request on GitHub. Don't hesitate to ask for support, if you need help at any point.

The Contribution Guide in the documentation contains some advice for making a pull request with code changes.

Code of Conduct

If you are professional and polite then everything will be alright.

Please don't be inconsiderate or mean, or anything in between.

Further Documentation

  • Backwards Compatibility - General info on how we approach backwards compatibility
  • Upgrade Guide - List of backwards breaking changes that need to be addressed when upgrading Deptrac to a new version and how to do it.
  • Core Concepts - Explains layers, rules and violations in more details.
  • Configuration - Reference for all available settings in a config file
  • Collectors - Reference for which collectors are available in Deptrac to define your layers.
  • Formatters - Lists the different output formats supported by Deptrac
  • Debugging - Overview of the debug commands
  • Code Of Conduct - Our community standards
  • Contribute - Advice for contributing code changes, e.g. how to run tests or how to build a phar file with your changes that you can use to analyse your projects
  • Security Guide - How to report security vulnerabilities