Strange interaction on UI between Enabled switch and PIN active status

[kingswindsor]

What happened?

I have 5 filled slots. let's call them Slots A, B, C D & E.
They are all enabled, but PIN active status for Slot B is Off. All other slots show PIN active as On.

If I disable Slot C it makes the Slot B's PIN active status go from Off to On.

If I re-enable Slot C, it turns Slot C's PIN active to Off

This is an example, it's consistent across all slots. One slot is always inactive unless I disable it, then they are all active. When I enable any slot, it becomes inactive and makes the previously inactive slot active.

Lock function fails when a slot's PIN is inactive, and the PIN drops out of the Code Slot Sensor field. So to get all 5 slots to function, I need to disable the slot with the inactive PIN in order to make the PIN active.

Steps to reproduce the issue

As described in What happened?

Home Assistant Version

2024.5.2

What version of Lock Code Manager are you running?

0.4.6

Lock make and model

Yale Keyless Connected with z-wave module

Relevant log output

None

Screenshots

No response

Anything else?

No response