Turbo Native Modules

If you've worked with React Native, you may be familiar with the concept of Native Modules, which allow JavaScript and platform-native code to communicate over the React Native "bridge", which handles cross-platform serialization via JSON.

Turbo Native Modules are the next iteration on Native Modules that provide a few extra benefits:

Strongly typed interfaces that are consistent across platforms
The ability to write your code in C++, either exclusively or integrated with another native platform language, reducing the need to duplicate implementations across platforms
Lazy loading of modules, allowing for faster app startup
The use of JSI, a JavaScript interface for native code, allows for more efficient communication between native and JavaScript code than the bridge

At a high-level the steps for writing a Turbo Module are:

Define a JavaScript specification using Flow or TypeScript.
Configure the dependencies management system to generate code from the provided spec.
Implement the Native code.
Integrate the code in the app.

This guide will show you how to create a basic Turbo Native Module compatible with the latest version of React Native.

Note

You can also setup local library containing Turbo Native Module with one command. Read the guide to Local libraries setup for more details.

How to Create a Turbo Native Module

To create a Turbo Native Module, we need to:

Define the JavaScript specification.
Configure the module so that Codegen can generate the scaffolding.
Write the native code to finish implementing the module.

1. Folder Setup

In order to keep the module decoupled from the app, it's a good idea to define the module separately from the app and then add it as a dependency to your app later. This is also what you'll do for writing Turbo Native Modules that can be released as open-source libraries later.

Next to your application, create a folder called RTNCalculator. RTN stands for "React Native", and is a recommended prefix for React Native modules.

Within RTNCalculator, create three subfolders: js, ios, and android.

The final result should look like this:

TurboModulesGuide
├── MyApp
└── RTNCalculator
    ├── android
    ├── ios
    └── js

2. JavaScript Specification

The New Architecture requires interfaces specified in a typed dialect of JavaScript (either Flow or TypeScript). Codegen will use these specifications to generate code in strongly-typed languages, including C++, Objective-C++, and Java.

There are two requirements the file containing this specification must meet:

The file must be named Native<MODULE_NAME>, with a .js or .jsx extension when using Flow, or a .ts, or .tsx extension when using TypeScript. Codegen will only look for files matching this pattern.
The file must export a TurboModuleRegistrySpec object.

Flow

// @flow
import type {TurboModule} from 'react-native/Libraries/TurboModule/RCTExport';
import {TurboModuleRegistry} from 'react-native';

export interface Spec extends TurboModule {
  add(a: number, b: number): Promise<number>;
}
export default (TurboModuleRegistry.get<Spec>(
  'RTNCalculator'
): ?Spec);

TypeScript

import { TurboModule, TurboModuleRegistry } from "react-native";

export interface Spec extends TurboModule {
  add(a: number, b: number): Promise<number>;
}

export default TurboModuleRegistry.get<Spec>("RTNCalculator") as Spec | null;

At the beginning of the spec files are the imports:

The TurboModule type, which defines the base interface for all Turbo Native Modules
The TurboModuleRegistry JavaScript module, which contains functions for loading Turbo Native Modules

The second section of the file contains the interface specification for the Turbo Native Module. In this case, the interface defines the add function, which takes two numbers and returns a promise that resolves to a number. This interface type must be named Spec for a Turbo Native Module.

Finally, we invoke TurboModuleRegistry.get, passing the module's name, which will load the Turbo Native Module if it's available.

Warning

We are writing JavaScript files importing types from libraries, without setting up a proper node module and installing its dependencies. Your IDE will not be able to resolve the import statements and you may see errors and warnings. This is expected and will not cause problems when you add the module to your app.

3. Module Configuration

Next, you need to add some configuration for Codegen and auto-linking.

Some configuration files are shared between iOS and Android, while the others are platform-specific.

Shared

The shared configuration is a package.json file used by yarn when installing your module. Create the package.json file in the root of the RTNCalculator directory.

{
  "name": "rtn-calculator",
  "version": "0.0.1",
  "description": "Add numbers with Turbo Native Modules",
  "react-native": "js/index",
  "source": "js/index",
  "files": [
    "js",
    "android",
    "ios",
    "rtn-calculator.podspec",
    "!android/build",
    "!ios/build",
    "!**/__tests__",
    "!**/__fixtures__",
    "!**/__mocks__"
  ],
  "keywords": ["react-native", "ios", "android"],
  "repository": "https://github.com/<your_github_handle>/rtn-calculator",
  "author": "<Your Name> <your_email@your_provider.com> (https://github.com/<your_github_handle>)",
  "license": "MIT",
  "bugs": {
    "url": "https://github.com/<your_github_handle>/rtn-calculator/issues"
  },
  "homepage": "https://github.com/<your_github_handle>/rtn-calculator#readme",
  "devDependencies": {},
  "peerDependencies": {
    "react": "*",
    "react-native": "*"
  },
  "codegenConfig": {
    "name": "RTNCalculatorSpec",
    "type": "modules",
    "jsSrcsDir": "js",
    "android": {
      "javaPackageName": "com.rtncalculator"
    }
  }
}

The upper part of the file contains some descriptive information like the name of the component, its version, and its source files. Make sure to update the various placeholders which are wrapped in <>: replace all the occurrences of the <your_github_handle>, <Your Name>, and <your_email@your_provider.com> tokens.

Then there are the dependencies for this package. For this guide, you need react and react-native.

Finally, the Codegen configuration is specified by the codegenConfig field. It contains an object that defines the module through four fields:

name: The name of the library. By convention, you should add the Spec suffix.
type: The type of module contained by this package. In this case, it is a Turbo Native Module; thus, the value to use is modules.
jsSrcsDir: the relative path to access the js specification that is parsed by Codegen.
android.javaPackageName: the package to use in the Java files generated by Codegen.

iOS: Create the `podspec` file

For iOS, you'll need to create a rtn-calculator.podspec file, which will define the module as a dependency for your app. It will stay in the root of RTNCalculator, alongside the ios folder.

The file will look like this:

require "json"

package = JSON.parse(File.read(File.join(__dir__, "package.json")))

Pod::Spec.new do |s|
  s.name            = "rtn-calculator"
  s.version         = package["version"]
  s.summary         = package["description"]
  s.description     = package["description"]
  s.homepage        = package["homepage"]
  s.license         = package["license"]
  s.platforms       = { :ios => "11.0" }
  s.author          = package["author"]
  s.source          = { :git => package["repository"], :tag => "#{s.version}" }

  s.source_files    = "ios/**/*.{h,m,mm,swift}"

  install_modules_dependencies(s)
end

The .podspec file has to be a sibling of the package.json file, and its name is the one we set in the package.json's name property: rtn-calculator.

The first part of the file prepares some variables that we use throughout the file. Then, there is a section that contains some information used to configure the pod, like its name, version, and description.

All the requirements for the New Architecture have been encapsulated in the install_modules_dependencies. It takes care of installing the proper dependencies based on which architecture is currently enabled. It also automatically installs the React-Core dependency in the old architecture.

Android: `build.gradle` and `ReactPackage` class

To prepare Android to run Codegen you have to:

Update the build.gradle file.
A Java/Kotlin class that implements the ReactPackage interface

At the end of these steps, the android folder should look like this:

android
├── build.gradle
└── src
    └── main
        └── java
            └── com
                └── rtncalculator
                    └── CalculatorPackage.java

The `build.gradle` file

First, create a build.gradle file in the android folder, with the following contents:

Java

buildscript {
  ext.safeExtGet = {prop, fallback ->
    rootProject.ext.has(prop) ? rootProject.ext.get(prop) : fallback
  }
  repositories {
    google()
    gradlePluginPortal()
  }
  dependencies {
    classpath("com.android.tools.build:gradle:7.3.1")
  }
}

apply plugin: 'com.android.library'
apply plugin: 'com.facebook.react'

android {
  compileSdkVersion safeExtGet('compileSdkVersion', 33)
  namespace "com.rtncalculator"
}

repositories {
  mavenCentral()
  google()
}

dependencies {
  implementation 'com.facebook.react:react-native'
}

Kotlin

buildscript {
  ext.safeExtGet = {prop, fallback ->
    rootProject.ext.has(prop) ? rootProject.ext.get(prop) : fallback
  }
  repositories {
    google()
    gradlePluginPortal()
  }
  dependencies {
    classpath("com.android.tools.build:gradle:7.3.1")
    classpath("org.jetbrains.kotlin:kotlin-gradle-plugin:1.7.22")
  }
}

apply plugin: 'com.android.library'
apply plugin: 'com.facebook.react'
apply plugin: 'org.jetbrains.kotlin.android'

android {
  compileSdkVersion safeExtGet('compileSdkVersion', 33)
  namespace "com.rtncalculator"
}

repositories {
  mavenCentral()
  google()
}

dependencies {
  implementation 'com.facebook.react:react-native'
}

The `ReactPackage` class

Then, you need a class that extends the TurboReactPackage interface. To run the Codegen process, you don't have to completely implement the package class: an empty implementation is enough for the app to pick up the module as a proper React Native dependency and to try and generate the scaffolding code.

Create an android/src/main/java/com/rtncalculator folder and, inside that folder, create a CalculatorPackage.java file.

Java

package com.rtncalculator;

import androidx.annotation.Nullable;
import com.facebook.react.bridge.NativeModule;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.module.model.ReactModuleInfoProvider;
import com.facebook.react.TurboReactPackage;

import java.util.Collections;
import java.util.List;

public class CalculatorPackage extends TurboReactPackage {

  @Nullable
  @Override
  public NativeModule getModule(String name, ReactApplicationContext reactContext) {
          return null;
  }

  @Override
  public ReactModuleInfoProvider getReactModuleInfoProvider() {
      return null;
  }
}

Kotlin

package com.rtncalculator;

import com.facebook.react.TurboReactPackage
import com.facebook.react.bridge.NativeModule
import com.facebook.react.bridge.ReactApplicationContext
import com.facebook.react.module.model.ReactModuleInfoProvider

class CalculatorPackage : TurboReactPackage() {
  override fun getModule(name: String?, reactContext: ReactApplicationContext): NativeModule? = null

  override fun getReactModuleInfoProvider(): ReactModuleInfoProvider? = null
}

React Native uses the ReactPackage interface to understand what native classes the app has to use for the ViewManager and Native Modules exported by the library.

4. Native Code

For the final step in getting your Turbo Native Module ready to go, you'll need to write some native code to connect the JavaScript side to the native platforms. This process requires two main steps:

Run Codegen to see what it generates.
Write your native code, implementing the generated interfaces.

When developing a React Native app that uses a Turbo Native Module, it is the responsibility of the app to actually generate the code using Codegen. However, when developing a TurboModule as a library, we need to reference the generated code, and it is therefore, useful to see what the app will generate.

As the first step for both iOS and Android, this guide shows how to execute manually the scripts used by Codegen to generate the required code. Further information on Codegen can be found here.

Warning

The code generated by Codegen in this step should not be committed to the versioning system. React Native apps are able to generate the code when the app is built. This allows an app to ensure that all libraries have code generated for the correct version of React Native.

iOS

Generate the code - iOS

To run Codegen for the iOS platform, we need to open a terminal and run the following command:

cd MyApp
yarn add ../RTNCalculator
cd ..
node MyApp/node_modules/react-native/scripts/generate-codegen-artifacts.js \
  --path MyApp/ \
  --outputPath RTNCalculator/generated/

This script first adds the RTNCalculator module to the app with yarn add. Then, it invokes Codegen via the generate-codegen-artifacts.js script.

The --path option specifies the path to the app, while the --outputPath option tells Codegen where to output the generated code.

The output of this process is the following folder structure:

generated
└── build
    └── generated
        └── ios
            ├── FBReactNativeSpec
            │   ├── FBReactNativeSpec-generated.mm
            │   └── FBReactNativeSpec.h
            ├── RCTThirdPartyFabricComponentsProvider.h
            ├── RCTThirdPartyFabricComponentsProvider.mm
            ├── RTNCalculatorSpec
            │   ├── RTNCalculatorSpec-generated.mm
            │   └── RTNCalculatorSpec.h
            └── react
                └── renderer
                    └── components
                        └── rncore
                            ├── ComponentDescriptors.h
                            ├── EventEmitters.cpp
                            ├── EventEmitters.h
                            ├── Props.cpp
                            ├── Props.h
                            ├── RCTComponentViewHelpers.h
                            ├── ShadowNodes.cpp
                            └── ShadowNodes.h

The relevant path for the Turbo Native Module interface is generated/build/generated/ios/RTNCalculatorSpec.

See the Codegen section for further details on the generated files.

Note

When generating the scaffolding code using Codegen, iOS does not clean the build folder automatically. If you changed the Spec name, for example, and then run Codegen again, the old files would be retained. If that happens, remember to remove the build folder before running the Codegen again.

cd MyApp/ios
rm -rf build

Write the Native iOS Code

Now add the Native code for your Turbo Native Module. Create two files in the RTNCalculator/ios folder:

The RTNCalculator.h, a header file for the module.
The RTNCalculator.mm, the implementation of the module.

RTNCalculator.h

#import <RTNCalculatorSpec/RTNCalculatorSpec.h>

NS_ASSUME_NONNULL_BEGIN

@interface RTNCalculator : NSObject <NativeCalculatorSpec>

@end

NS_ASSUME_NONNULL_END

This file defines the interface for the RTNCalculator module. Here, we can add any native method we may want to invoke on the view. For this guide, we don't need anything, therefore the interface is empty.

RTNCalculator.mm

#import "RTNCalculator.h"

@implementation RTNCalculator

RCT_EXPORT_MODULE()

- (void)add:(double)a b:(double)b resolve:(RCTPromiseResolveBlock)resolve reject:(RCTPromiseRejectBlock)reject {
    NSNumber *result = [[NSNumber alloc] initWithInteger:a+b];
    resolve(result);
}

- (std::shared_ptr<facebook::react::TurboModule>)getTurboModule:
    (const facebook::react::ObjCTurboModule::InitParams &)params
{
    return std::make_shared<facebook::react::NativeCalculatorSpecJSI>(params);
}

@end

The most important call is to the RCT_EXPORT_MODULE, which is required to export the module so that React Native can load the Turbo Native Module.

Then the add method, whose signature must match the one specified by the Codegen in the RTNCalculatorSpec.h.

Finally, the getTurboModule method gets an instance of the Turbo Native Module so that the JavaScript side can invoke its methods. The function is defined in (and requested by) the RTNCalculatorSpec.h file that was generated earlier by Codegen.

Tip

There are other macros that can be used to export modules and methods. You view the code that specifies them here.

Android

Android follows similar steps to iOS. We have to generate the code for Android, and then we have to write some native code to make it work.

Generate the Code - Android

To generate the code for Android, we need to manually invoke Codegen. This is done similarly to what we did for iOS: first, we need to add the package to the app, and then we need to invoke a script.

cd MyApp
yarn add ../RTNCalculator
cd android
./gradlew generateCodegenArtifactsFromSchema

This script first adds the package to the app, in the same way iOS does. Then, after moving to the android folder, it invokes a Gradle task to create the generated code.

Tip

To run Codegen, you need to enable the New Architecture in the Android app. This can be done by opening the gradle.properties files and by switching the newArchEnabled property from false to true.

The generated code is stored in the MyApp/node_modules/rtn-calculator/android/build/generated/source/codegen folder and it has this structure:

codegen
├── java
│   └── com
│       └── rtncalculator
│           └── NativeCalculatorSpec.java
├── jni
│   ├── Android.mk
│   ├── CMakeLists.txt
│   ├── RTNCalculator-generated.cpp
│   ├── RTNCalculator.h
│   └── react
│       └── renderer
│           └── components
│               └── RTNCalculator
│                   ├── ComponentDescriptors.h
│                   ├── EventEmitters.cpp
│                   ├── EventEmitters.h
│                   ├── Props.cpp
│                   ├── Props.h
│                   ├── ShadowNodes.cpp
│                   └── ShadowNodes.h
└── schema.json

Write the Native Android Code

The native code for the Android side of a Turbo Native Module requires:

to create a CalculatorModule.java that implements the module.
to update the CalculatorPackage.java created in the previous step.

The final structure within the Android library should look like this:

android
├── build.gradle
└── src
    └── main
        └── java
            └── com
                └── rtncalculator
                    ├── CalculatorModule.java
                    └── CalculatorPackage.java

Creating the `CalculatorModule.java`

Java

package com.rtncalculator;

import androidx.annotation.NonNull;
import com.facebook.react.bridge.NativeModule;
import com.facebook.react.bridge.Promise;
import com.facebook.react.bridge.ReactApplicationContext;
import com.facebook.react.bridge.ReactContext;
import com.facebook.react.bridge.ReactContextBaseJavaModule;
import com.facebook.react.bridge.ReactMethod;
import java.util.Map;
import java.util.HashMap;
import com.rtncalculator.NativeCalculatorSpec;

public class CalculatorModule extends NativeCalculatorSpec {

    public static String NAME = "RTNCalculator";

    CalculatorModule(ReactApplicationContext context) {
        super(context);
    }

    @Override
    @NonNull
    public String getName() {
        return NAME;
    }

    @Override
    public void add(double a, double b, Promise promise) {
        promise.resolve(a + b);
    }
}

Kotlin

package com.rtncalculator

import com.facebook.react.bridge.Promise
import com.facebook.react.bridge.ReactApplicationContext
import com.rtncalculator.NativeCalculatorSpec

class CalculatorModule(reactContext: ReactApplicationContext) : NativeCalculatorSpec(reactContext) {

  override fun getName() = NAME

  override fun add(a: Double, b: Double, promise: Promise) {
    promise.resolve(a + b)
  }

  companion object {
    const val NAME = "RTNCalculator"
  }
}

This class implements the module itself, which extends the NativeCalculatorSpec that was generated from the NativeCalculator JavaScript specification file.

Updating the `CalculatorPackage.java`

Java

package com.rtncalculator;

import androidx.annotation.Nullable;
import com.facebook.react.bridge.NativeModule;
import com.facebook.react.bridge.ReactApplicationContext;
+ import com.facebook.react.module.model.ReactModuleInfo;
import com.facebook.react.module.model.ReactModuleInfoProvider;
import com.facebook.react.TurboReactPackage;

import java.util.Collections;
import java.util.List;
+ import java.util.HashMap;
+ import java.util.Map;

public class CalculatorPackage extends TurboReactPackage {

  @Nullable
  @Override
  public NativeModule getModule(String name, ReactApplicationContext reactContext) {
+      if (name.equals(CalculatorModule.NAME)) {
+          return new CalculatorModule(reactContext);
+      } else {
          return null;
+      }
  }


  @Override
  public ReactModuleInfoProvider getReactModuleInfoProvider() {
-      return null;
+      return () -> {
+          final Map<String, ReactModuleInfo> moduleInfos = new HashMap<>();
+          moduleInfos.put(
+                  CalculatorModule.NAME,
+                  new ReactModuleInfo(
+                          CalculatorModule.NAME,
+                          CalculatorModule.NAME,
+                          false, // canOverrideExistingModule
+                          false, // needsEagerInit
+                          true, // hasConstants
+                          false, // isCxxModule
+                          true // isTurboModule
+          ));
+          return moduleInfos;
+      };
  }
}

Kotlin

package com.rtncalculator;

import com.facebook.react.TurboReactPackage
import com.facebook.react.bridge.NativeModule
import com.facebook.react.bridge.ReactApplicationContext
+import com.facebook.react.module.model.ReactModuleInfo
import com.facebook.react.module.model.ReactModuleInfoProvider

class CalculatorPackage : TurboReactPackage() {
- override fun getModule(name: String?, reactContext: ReactApplicationContext): NativeModule? = null
+ override fun getModule(name: String, reactContext: ReactApplicationContext): NativeModule? =
+   if (name == CalculatorModule.NAME) {
+     CalculatorModule(reactContext)
+   } else {
+     null
+   }

- override fun getReactModuleInfoProvider() = ReactModuleInfoProvider? = null
+ override fun getReactModuleInfoProvider() = ReactModuleInfoProvider {
+   mapOf(
+     CalculatorModule.NAME to ReactModuleInfo(
+       CalculatorModule.NAME,
+       CalculatorModule.NAME,
+       false, // canOverrideExistingModule
+       false, // needsEagerInit
+       true, // hasConstants
+       false, // isCxxModule
+       true // isTurboModule
+     )
+   )
+ }
}

This is the last piece of Native Code for Android. It defines the TurboReactPackage object that will be used by the app to load the module.

Final structure

The final structure should look like this:

TurboModulesGuide
├── MyApp
└── RTNCalculator
    ├── android
    │   ├── build.gradle
    │   └── src
    │       └── main
    │           └── java
    │               └── com
    │                   └── rtncalculator
    │                       ├── CalculatorPackage.java
    │                       └── CalculatorModule.java
    ├── generated
    ├── ios
    │   ├── RTNCalculator.h
    │   └── RTNCalculator.mm
    ├── js
    │   └── NativeCalculator.ts
    ├── package.json
    └── rtn-calculator.podspec

5. Adding the Turbo Native Module to your App

Now you can install and use the Turbo Native Module in your app.

Shared

First of all, we need to add the NPM package which contains the Component to the app. This can be done with the following command:

cd MyApp
yarn add ../RTNCalculator

This command will add the RTNCalculator module to the node_modules of your app.

iOS

Then, you need to install the new dependencies in your iOS project. To do so, run these commands:

cd ios
RCT_NEW_ARCH_ENABLED=1 bundle exec pod install

This command will look for all the dependencies of the project and it will install the iOS ones. The RCT_NEW_ARCH_ENABLED=1 instruct CocoaPods that it has to run some additional operations to run Codegen.

Note

You may have to run bundle install once before you can use RCT_NEW_ARCH_ENABLED=1 bundle exec pod install. You won't need to run bundle install anymore, unless you need to change the Ruby dependencies.

Android

Android configuration requires to enable the New Architecture:

Open the android/gradle.properties file
Scroll down to the end of the file and switch the newArchEnabled property from false to true.

JavaScript

Now you can use your Turbo Native Module calculator in your app!

Here's an example App.js file using the add method:

Flow

/**
 * Sample React Native App
 * https://github.com/facebook/react-native
 *
 * @format
 * @flow strict-local
 */
import React from "react";
import { useState } from "react";
import type { Node } from "react";
import { SafeAreaView, StatusBar, Text, Button } from "react-native";
import RTNCalculator from "rtn-calculator/js/NativeCalculator";

const App: () => Node = () => {
  const [result, setResult] = useState<number | null>(null);
  return (
    <SafeAreaView>
      <StatusBar barStyle={"dark-content"} />
      <Text style={{ marginLeft: 20, marginTop: 20 }}>
        3+7={result ?? "??"}
      </Text>
      <Button
        title="Compute"
        onPress={async () => {
          const value = await RTNCalculator.add(3, 7);
          setResult(value);
        }}
      />
    </SafeAreaView>
  );
};
export default App;

TypeScript

/**
 * Sample React Native App
 * https://github.com/facebook/react-native
 *
 * @format
 */
import React from "react";
import { useState } from "react";
import { SafeAreaView, StatusBar, Text, Button } from "react-native";
import RTNCalculator from "rtn-calculator/js/NativeCalculator";

const App: () => JSX.Element = () => {
  const [result, setResult] = useState<number | null>(null);
  return (
    <SafeAreaView>
      <StatusBar barStyle={"dark-content"} />
      <Text style={{ marginLeft: 20, marginTop: 20 }}>
        3+7={result ?? "??"}
      </Text>
      <Button
        title="Compute"
        onPress={async () => {
          const value = await RTNCalculator?.add(3, 7);
          setResult(value ?? null);
        }}
      />
    </SafeAreaView>
  );
};
export default App;

Try this out to see your Turbo Native Module in action!

Important

This documentation is still experimental and details are subject to changes as we iterate. Feel free to share your feedback on this discussion.

Moreover, it contains several manual steps. Please note that this won't be representative of the final developer experience once the New Architecture is stable. We're working on tools, templates and libraries to help you get started fast on the New Architecture, without having to go through the whole setup.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

turbo-modules.md

turbo-modules.md

Turbo Native Modules

How to Create a Turbo Native Module

1. Folder Setup

2. JavaScript Specification

3. Module Configuration

Shared

iOS: Create the `podspec` file

Android: `build.gradle` and `ReactPackage` class

The `build.gradle` file

The `ReactPackage` class

4. Native Code

iOS

Generate the code - iOS

Write the Native iOS Code

RTNCalculator.h

RTNCalculator.mm

Android

Generate the Code - Android

Write the Native Android Code

Creating the `CalculatorModule.java`

Updating the `CalculatorPackage.java`

Final structure

5. Adding the Turbo Native Module to your App

Shared

iOS

Android

JavaScript

Files

turbo-modules.md

Latest commit

History

turbo-modules.md

File metadata and controls

Turbo Native Modules

How to Create a Turbo Native Module

1. Folder Setup

2. JavaScript Specification

3. Module Configuration

Shared

iOS: Create the podspec file

Android: build.gradle and ReactPackage class

The build.gradle file

The ReactPackage class

4. Native Code

iOS

Generate the code - iOS

Write the Native iOS Code

RTNCalculator.h

RTNCalculator.mm

Android

Generate the Code - Android

Write the Native Android Code

Creating the CalculatorModule.java

Updating the CalculatorPackage.java

Final structure

5. Adding the Turbo Native Module to your App

Shared

iOS

Android

JavaScript

iOS: Create the `podspec` file

Android: `build.gradle` and `ReactPackage` class

The `build.gradle` file

The `ReactPackage` class

Creating the `CalculatorModule.java`

Updating the `CalculatorPackage.java`