grpc++ was not found when running make all #568

hrcHarry · 2024-03-26T10:25:01Z

hrcHarry
Mar 26, 2024

Hi
I followed the installation guide and got something wrong while make all. I have the following message

$ make all
[  2%] Creating directories for 'grpc_dependency'
[  2%] Built target googletest_dependency
[  4%] Creating directories for 'nlohmann_json_dependency'
[  7%] Creating directories for 'fmt_dependency'
[  9%] Performing download step (git clone) for 'grpc_dependency'
[ 12%] Performing download step (download, verify and extract) for 'nlohmann_json_dependency'
[ 14%] Performing download step (download, verify and extract) for 'fmt_dependency'
-- Downloading...
   dst='/home/harry/Bear/build/subprojects/Download/nlohmann_json_dependency/v3.11.2.tar.gz'
   timeout='none'
   inactivity timeout='none'
-- Using src='https://github.com/nlohmann/json/archive/v3.11.2.tar.gz'
Cloning into 'grpc_dependency'...
-- Downloading...
   dst='/home/harry/Bear/build/subprojects/Download/fmt_dependency/10.1.0.tar.gz'
   timeout='none'
   inactivity timeout='none'
-- Using src='https://github.com/fmtlib/fmt/archive/10.1.0.tar.gz'
-- verifying file...
       file='/home/harry/Bear/build/subprojects/Download/fmt_dependency/10.1.0.tar.gz'
-- Downloading... done
-- extracting...
     src='/home/harry/Bear/build/subprojects/Download/fmt_dependency/10.1.0.tar.gz'
     dst='/home/harry/Bear/build/subprojects/Source/fmt_dependency'
-- extracting... [tar xfz]
-- extracting... [analysis]
-- extracting... [rename]
-- extracting... [clean up]
-- extracting... done
[ 17%] No update step for 'fmt_dependency'
[ 19%] No patch step for 'fmt_dependency'
[ 21%] Performing configure step for 'fmt_dependency'
-- fmt_dependency configure command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/fmt_dependency/fmt_dependency-configure-*.log
[ 24%] Performing build step for 'fmt_dependency'
-- verifying file...
       file='/home/harry/Bear/build/subprojects/Download/nlohmann_json_dependency/v3.11.2.tar.gz'
-- Downloading... done
-- extracting...
     src='/home/harry/Bear/build/subprojects/Download/nlohmann_json_dependency/v3.11.2.tar.gz'
     dst='/home/harry/Bear/build/subprojects/Source/nlohmann_json_dependency'
-- extracting... [tar xfz]
-- extracting... [analysis]
-- extracting... [rename]
-- extracting... [clean up]
-- extracting... done
[ 26%] No update step for 'nlohmann_json_dependency'
[ 29%] No patch step for 'nlohmann_json_dependency'
[ 31%] Performing configure step for 'nlohmann_json_dependency'
-- nlohmann_json_dependency configure command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/nlohmann_json_dependency/nlohmann_json_dependency-configure-*.log
[ 34%] Performing build step for 'nlohmann_json_dependency'
-- nlohmann_json_dependency build command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/nlohmann_json_dependency/nlohmann_json_dependency-build-*.log
[ 36%] Performing install step for 'nlohmann_json_dependency'
-- nlohmann_json_dependency install command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/nlohmann_json_dependency/nlohmann_json_dependency-install-*.log
[ 39%] Completed 'nlohmann_json_dependency'
[ 39%] Built target nlohmann_json_dependency
-- fmt_dependency build command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/fmt_dependency/fmt_dependency-build-*.log
[ 41%] Performing install step for 'fmt_dependency'
-- fmt_dependency install command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/fmt_dependency/fmt_dependency-install-*.log
[ 43%] Completed 'fmt_dependency'
[ 43%] Built target fmt_dependency
[ 46%] Creating directories for 'spdlog_dependency'
[ 48%] Performing download step (download, verify and extract) for 'spdlog_dependency'
-- Downloading...
   dst='/home/harry/Bear/build/subprojects/Download/spdlog_dependency/v1.12.0.tar.gz'
   timeout='none'
   inactivity timeout='none'
-- Using src='https://github.com/gabime/spdlog/archive/v1.12.0.tar.gz'
-- verifying file...
       file='/home/harry/Bear/build/subprojects/Download/spdlog_dependency/v1.12.0.tar.gz'
-- Downloading... done
-- extracting...
     src='/home/harry/Bear/build/subprojects/Download/spdlog_dependency/v1.12.0.tar.gz'
     dst='/home/harry/Bear/build/subprojects/Source/spdlog_dependency'
-- extracting... [tar xfz]
-- extracting... [analysis]
-- extracting... [rename]
-- extracting... [clean up]
-- extracting... done
[ 51%] No update step for 'spdlog_dependency'
[ 53%] No patch step for 'spdlog_dependency'
[ 56%] Performing configure step for 'spdlog_dependency'
-- spdlog_dependency configure command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/spdlog_dependency/spdlog_dependency-configure-*.log
[ 58%] Performing build step for 'spdlog_dependency'
-- spdlog_dependency build command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/spdlog_dependency/spdlog_dependency-build-*.log
[ 60%] Performing install step for 'spdlog_dependency'
-- spdlog_dependency install command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/spdlog_dependency/spdlog_dependency-install-*.log
[ 63%] Completed 'spdlog_dependency'
[ 63%] Built target spdlog_dependency
HEAD is now at 0e34ec339 fix PHP distribtest on monterey (#31567) (#31702)
Submodule 'third_party/abseil-cpp' (https://github.com/abseil/abseil-cpp.git) registered for path 'third_party/abseil-cpp'
Submodule 'third_party/benchmark' (https://github.com/google/benchmark) registered for path 'third_party/benchmark'
Submodule 'third_party/bloaty' (https://github.com/google/bloaty.git) registered for path 'third_party/bloaty'
Submodule 'third_party/boringssl-with-bazel' (https://github.com/google/boringssl.git) registered for path 'third_party/boringssl-with-bazel'
Submodule 'third_party/cares/cares' (https://github.com/c-ares/c-ares.git) registered for path 'third_party/cares/cares'
Submodule 'third_party/envoy-api' (https://github.com/envoyproxy/data-plane-api.git) registered for path 'third_party/envoy-api'
Submodule 'third_party/googleapis' (https://github.com/googleapis/googleapis.git) registered for path 'third_party/googleapis'
Submodule 'third_party/googletest' (https://github.com/google/googletest.git) registered for path 'third_party/googletest'
Submodule 'third_party/libuv' (https://github.com/libuv/libuv.git) registered for path 'third_party/libuv'
Submodule 'third_party/opencensus-proto' (https://github.com/census-instrumentation/opencensus-proto.git) registered for path 'third_party/opencensus-proto'
Submodule 'third_party/opentelemetry' (https://github.com/open-telemetry/opentelemetry-proto.git) registered for path 'third_party/opentelemetry'
Submodule 'third_party/protobuf' (https://github.com/protocolbuffers/protobuf.git) registered for path 'third_party/protobuf'
Submodule 'third_party/re2' (https://github.com/google/re2.git) registered for path 'third_party/re2'
Submodule 'third_party/xds' (https://github.com/cncf/xds.git) registered for path 'third_party/xds'
Submodule 'third_party/zlib' (https://github.com/madler/zlib) registered for path 'third_party/zlib'
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/abseil-cpp'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/benchmark'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/boringssl-with-bazel'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/cares/cares'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/envoy-api'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/googleapis'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/googletest'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/libuv'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/opencensus-proto'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/opentelemetry'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/protobuf'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/re2'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/xds'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/zlib'...
Submodule path 'third_party/abseil-cpp': checked out '273292d1cfc0a94a65082ee350509af1d113344d'
Submodule path 'third_party/benchmark': checked out '0baacde3618ca617da95375e0af13ce1baadea47'
Submodule path 'third_party/bloaty': checked out '60209eb1ccc34d5deefb002d1b7f37545204f7f2'
Submodule 'third_party/abseil-cpp' (https://github.com/abseil/abseil-cpp.git) registered for path 'third_party/bloaty/third_party/abseil-cpp'
Submodule 'third_party/capstone' (https://github.com/aquynh/capstone.git) registered for path 'third_party/bloaty/third_party/capstone'
Submodule 'third_party/demumble' (https://github.com/nico/demumble.git) registered for path 'third_party/bloaty/third_party/demumble'
Submodule 'third_party/googletest' (https://github.com/google/googletest.git) registered for path 'third_party/bloaty/third_party/googletest'
Submodule 'third_party/protobuf' (https://github.com/protocolbuffers/protobuf.git) registered for path 'third_party/bloaty/third_party/protobuf'
Submodule 'third_party/re2' (https://github.com/google/re2) registered for path 'third_party/bloaty/third_party/re2'
Submodule 'third_party/zlib' (https://github.com/madler/zlib) registered for path 'third_party/bloaty/third_party/zlib'
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/abseil-cpp'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/capstone'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/demumble'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/googletest'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/protobuf'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/re2'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/zlib'...
Submodule path 'third_party/bloaty/third_party/abseil-cpp': checked out '5dd240724366295970c613ed23d0092bcf392f18'
Submodule path 'third_party/bloaty/third_party/capstone': checked out '852f46a467cb37559a1f3a18bd45d5ca8c6fc5e7'
Submodule path 'third_party/bloaty/third_party/demumble': checked out '01098eab821b33bd31b9778aea38565cd796aa85'
Submodule path 'third_party/bloaty/third_party/googletest': checked out '565f1b848215b77c3732bca345fe76a0431d8b34'
Submodule path 'third_party/bloaty/third_party/protobuf': checked out 'bc1773c42c9c3c522145a3119e989e0dff2a8d54'
Submodule 'third_party/benchmark' (https://github.com/google/benchmark.git) registered for path 'third_party/bloaty/third_party/protobuf/third_party/benchmark'
Submodule 'third_party/googletest' (https://github.com/google/googletest.git) registered for path 'third_party/bloaty/third_party/protobuf/third_party/googletest'
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/protobuf/third_party/benchmark'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/bloaty/third_party/protobuf/third_party/googletest'...
Submodule path 'third_party/bloaty/third_party/protobuf/third_party/benchmark': checked out '5b7683f49e1e9223cf9927b24f6fd3d6bd82e3f8'
Submodule path 'third_party/bloaty/third_party/protobuf/third_party/googletest': checked out '5ec7f0c4a113e2f18ac2c6cc7df51ad6afc24081'
Submodule path 'third_party/bloaty/third_party/re2': checked out '5bd613749fd530b576b890283bfb6bc6ea6246cb'
Submodule path 'third_party/bloaty/third_party/zlib': checked out 'cacf7f1d4e3d44d871b605da3b647f07d718623f'
Submodule path 'third_party/boringssl-with-bazel': checked out 'b9232f9e27e5668bc0414879dcdedb2a59ea75f2'
Submodule path 'third_party/cares/cares': checked out '6654436a307a5a686b008c1d4c93b0085da6e6d8'
Submodule path 'third_party/envoy-api': checked out 'bf6154e482bbd5e6f64032993206e66b6116f2bd'
Submodule path 'third_party/googleapis': checked out '2f9af297c84c55c8b871ba4495e01ade42476c92'
Submodule path 'third_party/googletest': checked out '0e402173c97aea7a00749e825b194bfede4f2e45'
Submodule path 'third_party/libuv': checked out '02a9e1be252b623ee032a3137c0b0c94afbe6809'
Submodule path 'third_party/opencensus-proto': checked out '4aa53e15cbf1a47bc9087e6cfdca214c1eea4e89'
Submodule path 'third_party/opentelemetry': checked out '60fa8754d890b5c55949a8c68dcfd7ab5c2395df'
Submodule path 'third_party/protobuf': checked out '24487dd1045c7f3d64a21f38a3f0c06cc4cf2edb'
Submodule 'third_party/benchmark' (https://github.com/google/benchmark.git) registered for path 'third_party/protobuf/third_party/benchmark'
Submodule 'third_party/googletest' (https://github.com/google/googletest.git) registered for path 'third_party/protobuf/third_party/googletest'
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/protobuf/third_party/benchmark'...
Cloning into '/home/harry/Bear/build/subprojects/Source/grpc_dependency/third_party/protobuf/third_party/googletest'...
Submodule path 'third_party/protobuf/third_party/benchmark': checked out '5b7683f49e1e9223cf9927b24f6fd3d6bd82e3f8'
Submodule path 'third_party/protobuf/third_party/googletest': checked out '5ec7f0c4a113e2f18ac2c6cc7df51ad6afc24081'
Submodule path 'third_party/re2': checked out '8e08f47b11b413302749c0d8b17a1c94777495d5'
Submodule path 'third_party/xds': checked out 'cb28da3451f158a947dfc45090fe92b07b243bc1'
Submodule path 'third_party/zlib': checked out '04f42ceca40f73e2978b50e93806c2a18c1281fc'
[ 65%] No update step for 'grpc_dependency'
[ 68%] No patch step for 'grpc_dependency'
[ 70%] Performing configure step for 'grpc_dependency'
-- grpc_dependency configure command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/grpc_dependency/grpc_dependency-configure-*.log
[ 73%] Performing build step for 'grpc_dependency'
-- grpc_dependency build command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/grpc_dependency/grpc_dependency-build-*.log
[ 75%] Performing install step for 'grpc_dependency'
-- grpc_dependency install command succeeded.  See also /home/harry/Bear/build/subprojects/Stamp/grpc_dependency/grpc_dependency-install-*.log
[ 78%] Completed 'grpc_dependency'
[ 78%] Built target grpc_dependency
[ 80%] Creating directories for 'BearSource'
[ 82%] No download step for 'BearSource'
[ 85%] No update step for 'BearSource'
[ 87%] No patch step for 'BearSource'
[ 90%] Performing configure step for 'BearSource'
loading initial cache file /home/harry/Bear/build/subprojects/tmp/BearSource/BearSource-cache-Release.cmake
-- The C compiler identification is GNU 11.4.0
-- The CXX compiler identification is GNU 11.4.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found nlohmann_json: /home/harry/Bear/build/subprojects/Install/nlohmann_json_dependency/share/cmake/nlohmann_json/nlohmann_jsonConfig.cmake (found version "3.11.2")
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2")
-- Checking for modules 'protobuf;grpc++'
--   Package 'openssl', required by 'grpc', not found
CMake Error at /snap/cmake/1378/share/cmake-3.29/Modules/FindPkgConfig.cmake:619 (message):
  The following required packages were not found:

   - grpc++

Call Stack (most recent call first):
  /snap/cmake/1378/share/cmake-3.29/Modules/FindPkgConfig.cmake:847 (_pkg_check_modules_internal)
  CMakeLists.txt:30 (pkg_check_modules)


-- Configuring incomplete, errors occurred!
make[2]: *** [CMakeFiles/BearSource.dir/build.make:98: subprojects/Stamp/BearSource/BearSource-configure] Error 1
make[1]: *** [CMakeFiles/Makefile2:174: CMakeFiles/BearSource.dir/all] Error 2
make: *** [Makefile:156: all] Error 2

Not sure whether there is something I missed. Could someone help? Thanks!

Additional info:

OS: Ubuntu 22.04
echo $PATH shows /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin:/home/harry/.fzf/bin
gcc --version shows gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0
openssl version shows OpenSSL 3.0.2 15 Mar 2022 (Library: OpenSSL 3.0.2 15 Mar 2022)
- which openssl gives /usr/bin/openssl
- Info in apt list --installed: openssl/now 3.0.2-0ubuntu1.14 amd64 [installed,upgradable to: 3.0.2-0ubuntu1.15]

If there is another info needed for troubleshooting, please let me know.

rizsotto · 2024-03-26T12:31:22Z

rizsotto
Mar 26, 2024
Maintainer

Package 'openssl', required by 'grpc', not found

I think this will be the problem.

2 replies

hrcHarry Mar 26, 2024
Author

Thanks for replying.
After checking openssl version, it gives OpenSSL 3.0.2 15 Mar 2022 (Library: OpenSSL 3.0.2 15 Mar 2022).
I think openssl is installed. Is its version out-of-date or something else?

By the way, I update more additional info in the post. Hope that helps.

hrcHarry Mar 26, 2024
Author

Hi. It seems that make all succeeded after installing libssl-dev. (See here) Then bear --version gives bear 3.1.3.

By the way, I cannot find the information about libssl-dev in the make all log. Do I miss checking some other log?

Also, I have concern for the message:

$ make all
[  9%] Built target googletest_dependency
[ 19%] Built target grpc_dependency
... (skip)
[ 85%] Performing test step for 'BearSource'
*********************************
No test configuration file found!
*********************************
Usage

  ctest [options]

[ 87%] Performing install step for 'BearSource'
... (skip)
[100%] Built target BearSource

Should I worry about the message No test configuration file found!?

Thanks!

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

grpc++ was not found when running make all #568

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 1 comment 2 replies

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Select a reply

grpc++ was not found when running make all #568

hrcHarry Mar 26, 2024

Replies: 1 comment · 2 replies

rizsotto Mar 26, 2024 Maintainer

hrcHarry Mar 26, 2024 Author

hrcHarry Mar 26, 2024 Author

hrcHarry
Mar 26, 2024

Replies: 1 comment 2 replies

rizsotto
Mar 26, 2024
Maintainer

hrcHarry Mar 26, 2024
Author

hrcHarry Mar 26, 2024
Author