Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

darp9: usb3 devices not detected on thunderbolt port #497

Open
karterfone opened this issue Oct 25, 2023 · 3 comments
Open

darp9: usb3 devices not detected on thunderbolt port #497

karterfone opened this issue Oct 25, 2023 · 3 comments

Comments

@karterfone
Copy link

  • Model: darp9
  • BIOS version: 2023-08-18_a8dd6c2
  • EC version: 2023-08-18_a8dd6c2
  • OS: Ubuntu 22.04
  • Kernel: 6.5.4-76060504-generic

USB3 devices are not detected by the Thunderbolt port, either through a dock, or directly connected to the TB4 port. The adjacent USB4 port is not affected. When a Thunderbolt dock is plugged in, external monitors and USB2 devices work normally, and boltctl shows a Thunderbolt dock connected and authenticated. Tested with two different TB4 docks and a separate Dell Latitude with TB4 as a control. The Latitude had no issues using any ports or devices on the docks.

Steps to reproduce

Plug a USB3 device into the darp9 Thunderbolt port.

Expected behavior

USB3 device is detected and visible to the OS.

Actual behavior

USB3 devices are never detected. No error messages regarding USB3 connections show up in the system logs.

Additional info

lsusb -t shows USB2 devices being attached to one bus. Nothing USB3 shows up there. When switching to the USB4 port, USB3 devices show up on a separate bus. Other OSes all had the same result in testing. The darp9 was sent in for warranty service, wherein the motherboard was reportedly replaced, but with no effect. The problem has persisted since initial purchase.

@ahoneybun
Copy link
Member

Is this when the device is connected at boot or if you connect the device after the system is booted? It could be connected to this issue:

#343

@karterfone
Copy link
Author

karterfone commented Oct 26, 2023

Possibly, but with a different issue. If the device is connected at boot, it is detected as a USB2 device. If plugged into the standard USB-C or -A port, it is detected as USB3. Otherwise, the behavior is unchanged.

It should be noted that after plugging and unplugging the TB4 dock a few times, the laptop no longer registers that the dock is unplugged. boltctl still shows the dock status as 'authorized', when it should read 'disconnected'. In this state, no devices are detected on the TB4 port at all. A suspend/resume is the only way to get it unstuck.

@crawfxrd
Copy link
Member

crawfxrd commented Nov 20, 2023

I cannot reproduce this with USB mass storage devices on 2023-09-08_42bf7a6. All of mine work in both USB-C ports.
I have no other USB3 devices to test with.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants