This project was developed during my first year of industrial engineering at the Liberal University of Brussel (VUB). The objective was to create an alarm clock and program it using the Arduino UNO. I decided to enhance the functionality by integrating a Bluetooth speaker system and designing it with a modern twist on an old-school BoomBox.

Manage Custom Display Led

This repository contains all of the information you need to start wire up and code the 7-segment display.

Micropython driver for 7 segment LCD indicator PDC-6X1.

The coolSAA1064 arduino library handles the 7 segment Philips / NXP SAA1064 driver for easily displaying and scrolling numbers and words on up to four displays.

Ravenna Ultra-Low-Altitude Operating System: An embedded OS for AVR and ARM CPUs

Arduino library to display numbers and text on a 4 and 6 digit 7-segment TM1637 display modules.

Labwork on Logic Design implementation in Verilog on a Basys3 FPGA Module

Developing a system that controls the stop-watch time and displays it on 7-segments.

falstad - seven segments with branch currents common resistor vs individual branch resistors

Basics with arduino uno r3 and c++

It's simple library for arduino, which allow to controll 7 segment display, which driver is 74hc595d. You can print on it numbers, letters and special chars.

uSevenSegmentLib documentation and extras

Arduino, ESP8266 and STM32 7-segment multiplexed displays library - uSevenSegmentLib

Simple library for controlling up to 4 7-segment-displays using Arduino-UNO or similar

frequency counter with display and analog scheme

Logic gates, simplification of Boolean functions, design and testing of combinational and sequential circuits including code converters, multiplexers, adders, and synchronous counters. For non-electrical and non-computer engineering majors only.

Read and Display Temperature data using Arduino while parallelly generating 1sec clock without any delay

Digital Timer Relay | 數碼時間繼電器

Displaying local time (with NTPD option) and weather from OpenWeatherMap APIs on a Raspberry Pi with the 7-segment Adafruit Backpack