Skip to content

Latest commit

 

History

History
551 lines (458 loc) · 26.3 KB

CHANGELOG.md

File metadata and controls

551 lines (458 loc) · 26.3 KB
Raw

Changelog

Older changelog entries (v1...v7)

8.9.0-beta.3 (2021-12-16)

Features

  • Add support for Door Lock Logging CC

Bugfixes

  • Make sure that encodePartial returns an unsigned int
  • Send nodes to sleep again after successful response
  • Reuse S0 nonce for the lifetime of a CC instance
  • Do not send Supervision Reports when another transaction is active
  • Use the last 10 sequence numbers to check for duplicate S2 messages
  • Fix computation of neighbor discovery timeout
  • Skip CC interview step for the controller node
  • Correct error message when SmartStart isn't supported
  • Send battery nodes to sleep after all message types targeting them, not only SendData which expect a response
  • Disallow Node.js releases that are dev previews or don't support subpath export patterns
  • Fixed a crash that happened when an in-flight message expired
  • Don't query all security classes if the highest one is known, e.g. directly after the inclusion
  • Errors during Serial API command execution are now properly forwarded and no longer stall the communication
  • Security S0 nonce handling was improved to avoid nonces timing out before first use
  • When waiting for a reply from a node, nonce requests from other nodes are queued instead of handled immediately. Especially with the current 700 series issues, this should avoid some iterruptions in the communication.

Config file changes

  • Added metadata for HS-WX300
  • Several units and re-trigger parameter 5 default on ZP3111-5
  • Additional Product ID for HS-WX300
  • Update Keemple Smart Radiator
  • Add metadata to POPP Smart Radiator
  • Add product ID 0x0164 to SimonTech Roller Blind
  • Deprecate firmware version file splits, prefer conditionals
  • Fix typo in param labels
  • Clean up configuration and correct param ranges for Steinel XLED Home 2
  • Clean up and consolidate ARZ Roller Shutters
  • Add double tap support to GE/Jasco 45609
  • Fixed a typo in master_template and correct MP21ZD options
  • Correct params for Fibaro FGWP102 FW 3.2
  • Clarify dim level parameter label for GE/Jasco 26932 / 26933 / ZW3008
  • Add fingerprint for AU/NZ model of Aeotec ZW141
  • Add fingerprint 0x0100:0x400a to Fibargroup FGD211

Changes under the hood

  • Restored the changes to the outgoing message handling. Related bugfixes are mentioned above.

8.8.3 (2021-12-03)

Bugfixes

  • Temporarily revert the changes to the outgoing message handling, which fails on some edge cases

8.8.2 (2021-11-26)

Bugfixes

  • Fixed an issue where the driver could get stuck in a loop sending a node to sleep

8.8.1 (2021-11-25)

Bugfixes

  • Don't cancel scheduled verification polls for "value updated" events caused by the emitValueUpdateAfterSetValue option

8.8.0 (2021-11-25)

Features

  • The state machine handling outgoing messages has been rewritten from scratch, eliminating hard-coded message specific logic and adding the ability to handle sequenced messages. Things like requesting Security S0/S2 nonces and waiting for responses to GET requests now happens outside the state machine.
  • When a Z-Wave controller supports emitting transmit status reports for sent commands, these are now parsed, enabling further evaluation in future releases.
  • Implemented methods to check the health of routes between a node and the controller or other nodes.
  • Added an option to refreshInfo that allows resetting the cached info about granted security classes.
  • Added a driver option to emit "value update" events after setValue

Bugfixes

  • Before destroying the driver, remember that soft reset is not supported when a stick fails to re-connect
  • Don't handle SIGINT in the driver, let applications take care of it
  • Correctly reset inclusion state after soft reset
  • Assert that node exists before checking security class
  • Store controllerNodeId after configuring it during the interview
  • Add Vision Gen5 USB Stick to soft reset blacklist
  • Fixed the JSDoc comments for the grantSecurityClasses user callback
  • The commandsDroppedTX node statistics are now updated when an outgoing command could not be sent to a node

Config file changes

  • Disable Basic CC mapping for HeatIt TF016
  • Add REHAU AG RE.GUARD
  • Add device Inteset WR01Z
  • Update Zooz ZEN15 Config to FW 1.6+
  • Add manufacturer Inteset (0x039a)
  • Add fingerprint 0x0303:0x4000 for Fibaro FRG223
  • Add parameter 17 to Zooz ZEN73 (FW 10.0+)
  • Add Ecolink TBZ500 Z-Wave Smart Thermostat
  • Change some parameter units to seconds for Minoston MP20Z
  • Update Spectrum Brands 892 to match style guide / 893 file format
  • Add Spectrum Brands 893 deadbolt
  • Treat Basic Set as event for Merten single switch

Changes under the hood

  • Upgraded yarn to v3.1 and switched from PnP to the new pnpm linker
  • Migrate from project-snippets extension to VSCode-native snippets
  • Upgrade to TypeScript 4.5
  • Added documentation for serial-over-tcp connections

8.7.7 (2021-11-18)

Bugfixes

  • Add driver emitValueUpdateAfterSetValue option to emit "value updated" events after setValue

8.7.6 (2021-11-15)

Bugfixes

  • Update thermostat setpoint metadata when unit changes between reports
  • Avoid exiting the process while waiting for the Serial API to start up if the event loop is otherwise empty

Config file changes

  • Swap param 9 partials, add missing option for ZW100/FT100
  • Force-add missing CCs to ZMNHAA
  • Update ZEN23 config file with conditional parameters
  • Add missing units to Fibaro FGBS-222
  • Change firmware range for Aeotec a├½rQ v1
  • Add fingerprint 0x0300:0xa10d to Sunricher SR-ZV9001T4-DIM
  • Correct LED Indicator Control parameter for ZEN27
  • Map reports from root to endpoint 1 on Fibaro Single Switches
  • Fix spelling in label for Honeywell 39349

Changes under the hood

  • Remove revision property from import script

8.7.5 (2021-11-05)

Bugfixes

  • When a 500-series USB stick reconnects during startup, the process doesn't exit anymore if the event loop is otherwise empty
  • Increase delay before verifying thermostat values after set

Config file changes

  • Add Ring 4AR1SZ-0EN0 Alarm Extender Gen2

8.7.4 (2021-11-03)

Bugfixes

  • Fixed a crash that happened when determining the SDK version for certain protocol versions

8.7.3 (2021-11-03)

Bugfixes

  • The node ID of an existing node is no longer unnecessarily stored when serializing the provisioning list
  • Fixed assignment of lifeline associations that only support node associations, even though multi channel associations are supported by the node
  • The SmartStart feature is now limited to Z-Wave SDK 6.81+. Support needs to be tested before using the feature.

Config file changes

  • Add HomeSeer HS-WX300 Switch
  • Add missing parameters for Telldus TZWP-102
  • Add fingerprint to NAS-WR01ZE

8.7.2 (2021-11-02)

Bugfixes

  • When provisioning an already-included node, the provisioning entry now gets assigned the node ID immediately

8.7.1 (2021-11-02)

Bugfixes

  • Fix auto-enabling SmartStart listening mode after an inclusion or exclusion

8.7.0 (2021-11-01)

Features

  • Add support for SmartStart and S2-only inclusion through pre-provisioned security information
  • Expose a helper function to parse QR code strings into provisioning information

Bugfixes

  • During S2 bootstrapping, send the controller's public key immediately to keep the included node from timing out
  • Allow removing associations with invalid node IDs
  • When the controller reports its own ID as 0 on startup, repeat the controller identification after soft-reset or restart
  • Fix polling of Fibaro CC

Config file changes

  • Add Aeotec aërQ Humidity Sensor v2
  • Add support for Heltun HE-FT01, small fixes for HE-HT01
  • Delay manual refresh for Leviton DZS15
  • Treat Basic Set as event for Merten FunkTaster CONNECT
  • Fix reporting for Fibaro FGT001
  • Fix reporting for Fibaro FGS-223

8.6.1 (2021-10-26)

Bugfixes

  • Try to detect if a Z-Wave stick is incompatible with soft-reset and automatically disable the functionality

8.6.0 (2021-10-25)

Features

  • Implemented and use soft reset command. If this causes problems, you can opt-out.
  • Implemented 700-series variant of NVM backup/restore
  • Add driver option to change where lockfiles are created
  • Implement waitForMessage to await unsolicited Serial API messages
  • Add context object to log messages

Bugfixes

  • Avoid force-adding Supervision support, remove encapsulation CCs from list of mandatory CCs
  • Check correct transaction for pauseSendThread flag
  • Remove listeners before closing serial port
  • Emit Driver_Failed error when serial port errors
  • Better error when creating a multicast group with missing nodes
  • Security S2 bootstrapping is now aborted when an incorrect PIN is entered
  • Avoid queuing duplicate firmware fragments
  • Add additional 1s delay before verifying a value that has been set through the setValue API with a transition duration

Config file changes

  • Add support for Heltun panels
  • Auto-assign Binary Sensor Report association group for FortrezZ MIMOLite
  • Add LRM-1000 Wall Mounted Dimmer
  • Merge MH9-CO2 variants, add Z-Wave+ variant with firmware 2.4
  • Add fingerprint 0x0331:0x010b to "FortrezZ LLC SSA3"
  • Add Heatit Z-Push Button 4
  • Update NAS-AB01Z to match manual
  • Clean up Zooz Zen 7x configs
  • Correct manufactuerID for Zooz ZAC36
  • Correct param 100 and preserve endpoints for ZMNHTD
  • Force notification idle reset for Vision Security ZP3103
  • Update lifeline config and parameters for Philio PAN06 v1
  • Add fingerprint 0x0200:0x1022 to Shenzhen Neo NAS-DS01Z
  • Add Fakro FVS Solar Powered Skylight
  • Tidy up Vitrum devices
  • Correct identification of Vision ZP3111-5
  • Remove endpoints from FGS-212

Changes under the hood

  • supportsZWavePlus property was removed from config files and documentation
  • The paramInformation property in config files was converted to an array in order to preserve ordered parameters
  • Environment variables on Gitpod should now be set correctly

8.5.0 (2021-10-11)

Features

  • Export getAPI through zwave-js/CommandClass
  • Add getDefinedValueIDs for virtual nodes

Bugfixes

  • Avoid including undefined properties in configuration metadata
  • Add debug logging to configureLifelineAssociations, always query normal association groups
  • Remove Security S0/S2 from mandatory CCs in Device Classes configuration
  • Refresh associations after removing invalid destinations
  • Don't wait for node ACK after Security 2 CC::TransferEnd
  • Increase tolerance for wakeup interval to 5 minutes without auto-refreshing the interval
  • Remove securityClasses property from SecurityClassOwner interface to fix TypeScript error
  • Filter out corrupted Meter CC Reports and Multilevel Sensor CC Reports
  • Added a fallback for NVM backup when the initial response contains an empty buffer

Config file changes

  • Change NAS-PD07Z parameters to match actual device configuration
  • Delete duplicate config file for Fakro ZWS230
  • Update ZCOMBO-G units/metadata
  • Add fingerprint to BeNext Energy switch
  • Add support for Sensative AB Strips Drip 700
  • Spelling mistake in manufacturer name
  • Add Sunricher RGBW and CCT wall controllers
  • Add firmware version 1.6 to Zooz ZEN22
  • Force scene count of VRCS4 and VRCZ4 to 8
  • Add Aeotec illumino switches

Changes under the hood

  • Add support for prebuilt Gitpod instances to simplify contributing without installing VSCode locally
  • Dependency updates

8.4.1 (2021-09-27)

Bugfixes

  • Responses to secure Supervision CC::Get commands are now correctly sent with security encapsulation if required
  • Errors in application-provided callbacks for Security S2 bootstrapping are now caught

Config file changes

  • Auto-idle notifications for Ecolink DWZWAVE25

Changes under the hood

  • Fixed the workflow for creating test releases from PRs

8.4.0 (2021-09-26)

Features

  • Added a compat flag to override the number of scenes accessible to Scene Controller Configuration CC
  • Experimental support for Wake Up on demand
  • The values of Scene Actuator Configuration CC are now pre-created during the node interview

Bugfixes

  • CCs that are removed via a configuration files now stay removed after the Security S0/S2 interview
  • Implemented a workaround for the incorrect Serial API Setup Sub Command bitmask encoding in 700 series sticks with a firmware of 7.15 or higher
  • Rename consumed/produced in meter labels to consumption/production

Config file changes

  • Add fingerprint 0xa803:0x1352 to McoHome A8-9
  • Add Neo Coolcam NAS-PD07Z Motion Sensor 5in1
  • Add NIE Tech / Eva Logik ZW96
  • Add Aibase A19 LED Bulb
  • Add Aibase Water Leak Sensor
  • Add templating and remove unnecessary parameters
  • Add device identifier for MCOHome MH10-PM2.5
  • Add missing parameters to Zooz ZEN15
  • Add fingerprint 0x1301:0x4001 to "Fibargroup FGT001"
  • Add Nortek WO15EMZ5
  • Correct units for Fibaro FGS-224 and FGS-214 params 154 and 155
  • Update Philio PSM02 Configuration
  • Use unsigned for config parameters setting Basic Set levels
  • Add fingerprint to Fakro ZWS230
  • Add fingerprint to OOMI Color Strip
  • Disable Basic CC mapping for Eaton/Aspire RFWC5
  • Add fingerprint to Popp & Co POPE700342
  • Update Philio PST02A and PST02B to use partial config parameters (5, 6, 7)

Changes under the hood

  • Fixed a bug in ConfigManager tests that led to a folder with name undefined being created

8.3.1 (2021-09-14)

Config file changes

  • Add fingerprint 0xaa00:0xaa02 to NIE Technology Co., Ltd. ZW31
  • Preserve root endpoint values for Everspring ST814

Changes under the hood

  • Add Node.js 16.9.1+ to the range of supported versions.

8.3.0 (2021-09-12)

Shoutout to @Ikcelaks and @IvanBrazza, who've contributed the main features in this release!

Features

  • Support reacting to SupervisionCC::Get
  • Add setting dimmingDuration for Scene Actuator Configuration CC with setValue API
  • Add setting dimmingDuration for Scene Controller Configuration CC with setValue API

Bugfixes

  • Correctly determine the capabilities of endpoints during Security S2 interview

Config file changes

  • Enable basic set mapping for ZWN-BPC variants
  • Force Multilevel Switch CC to be supported in MCOHome MH-C221
  • Add product ID for EU version of Ring Contact Sensor v2
  • Remove Z-Wave Plus CC from GE 14318
  • Add product id 0x0103 to Aeotec ZW141
  • Add Minoston mp21zp config file
  • Add fingerprint to Logic Group ZSO7300
  • Reduce parameter 9's minValue to 0 for Zooz ZEN24 4.0

Changes under the hood

  • Node.js 16.9.0 causes crashes in testing, so we cannot verify that Z-Wave JS works correctly with it. Until that bug is fixed, we've removed Node.js 16.9.0 from the range of supported versions.

8.2.3 (2021-09-06)

Bugfixes

  • Interpret wait time after firmware update as seconds, not milliseconds
  • Fall back to interpreting OTA/OTZ firmware files as binary, if they aren't in Intel HEX format
  • Guard against invalid inclusion strategies, log which one was chosen

Config file changes

  • Add fingerprint 0x0005:0x0112 to "Fakro AMZ Solar"
  • Add config for Minoston MP21ZD
  • Add metadata + units to Namron Z-Wave Dimmer2 400W
  • Add metadata to Namron Z-Wave Dimmer 400W
  • Correct Aeotec ZWA011 and ZWA012 parameters
  • Add Zooz ZAC36 water valve
  • Add support for HE-TPS05
  • Add support for FGWCEU-201

Changes under the hood

  • Documentation: Mention that an option for S0 only inclusion must exist
  • Updated some dependencies

8.2.2 (2021-09-02)

Bugfixes

  • Handle missing S2 keys more gracefully

Config file changes

  • Disable strict entry control validation for Ring Keypad v2
  • Add HeatIt Z Push Button 2
  • Add support for Zipato PH-PSE02
  • Add new Zooz devices ZSE41/ZSE42; fix ZEN15 parameter 30
  • Clean up config file for FGFS-101
  • Add support for Namron Dimmer 400W

Changes under the hood

  • Upgrade to TypeScript 4.4

8.2.1 (2021-08-25)

Bugfixes

  • Fixed an invalid definition in the sensor types configuration file

Config file changes

  • Add fingerprint for Fibaro FGFS

8.2.0 (2021-08-25)

Features

  • Add new ConfigManager properties to expose the remaining config maps

Bugfixes

  • Print less intimidating logs for missing S2 keys during decryption
  • Clarify error messages in the log when S0/S2 keys are missing
  • When converting pre-8.1 cache files, treat the nodes as not having any S2 security classes

Config file changes

  • Add fingerprint to Ring 1st Gen Range Extender config
  • Cleanup device file for Fibaro button
  • Add metadata to Nortek devices
  • Correct ZWA012 parameters indexing
  • Add association config for Vision ZM1701
  • Update Hank Electronics devices

Changes under the hood

  • Move more scale definitions into scales.json

8.1.1 (2021-08-17)

Bugfixes

  • Added a missing | undefined to the deprecated beginInclusion signature
  • Fixed a check when replacing a node with another one that should use encryption

8.1.0 (2021-08-15) · „Hell, it's about damn time”

Features

Just one, but it's a big one: We added support for Security S2 inclusion and singlecast communication 🎉.
As it looks like, Z-Wave JS is the first open source library to support Security S2.

If you plan to add support in your application, see the documentation and PR description for details - this also requires UI changes.

Bugfixes

  • The firmware target selection for targets other than 0 no longer incorrectly complains about an incorrect target
  • Avoid writing into node_modules when updating an external configuration directory
  • When an endpoint shares its lifeline with the root (i.e. has 0 max. associations), the root's associations are now ignored when determining how the endpoints's associations should be configured

Config file changes

  • Add another product ID variant to Yale YRD210
  • Update and cleanup Fibaro Walli Double Switch
  • Preserve root endpoint values for TZ06
  • Allow manual entry for Zooz ZSE11 Param 12
  • Add missing fingerprint to MCOHome MH9-CO2-WD
  • Fix Heltun HE-RS01 parameters 41-45

8.0.8 (2021-08-04)

Bugfixes

  • The firmware target selection for targets other than 0 no longer incorrectly complains about an incorrect target

Config file changes

  • Add Silabs UZB3 500 series controller device
  • Correct parameter 81 for Aeotec ZW100
  • Add MCO Home MH5-2a and MH-S510, correct others
  • Updates to Fibaro FGS223 and FGD212
  • Add groups for Heatit Smoke Battery
  • Add support for HELTUN HE-HLS01, HE-HT01, HE-RS01
  • Update Fibaro FGT001 for v8 changes, preserve root and endpoint 2
  • Map root reports to endpoint 1 for Fibaro FGS211/221
  • Add option 11 to ZEN17 parameters 2 and 3
  • Update non-device configs (indicators, notifications, ...) to certification package 2020C

8.0.7 (2021-08-02)

Bugfixes

Improved the heuristic for lifeline associations, which should resolve some reporting issues with devices:

  • If the root endpoint of a device is configured to use a node association, the fallback for the other endpoints no longer creates a multi channel association on the root endpoint
  • If the endpoints of a multi channel device don't support associations, the default lifeline on the root device will be configured as a multi channel association

Config file changes

  • Correct values sizes for zw096/zw099
  • Correct device file for Ecolink ISZW7
  • Preserve root endpoint values for Aeotec DSB09

8.0.6 (2021-07-28)

Bugfixes

  • The detection whether a config file is considered embedded or user-provided now takes ZWAVEJS_EXTERNAL_CONFIG into account.
  • Improved the error message when the cache directory cannot be written to
  • Avoid overwriting the .json cache file with empty data on shutdown
  • Removing associations from non-multichannel groups now works correctly
  • The endpoint device class is now stored correctly when all endpoints have identical capabilities
  • Fixed a crash that happened when trying to determine if all endpoints are the same device class and the device class hasn't been stored before
  • Added missing metadata definitions to Version CC fields

Config file changes

  • Add NAS-PD03Z Motion Sensor 3
  • Template other Shenzhen Neo motion sensors
  • Map root reports to endpoint 1 for CT101
  • Add missing LED Light param to GE/Jasco 46202 and 14292
  • Add missing param and metadata for GE/Jasco 46203
  • Add fingerprint to Aeotec ZWA009

Changes under the hood

  • Added regression tests for this oddysey of config loading fixes
  • Added a bot command to add new fingerprints to existing config files

8.0.5 (2021-07-22)

Bugfixes

  • Fixed $import validation logic for device config files from the ZWAVEJS_EXTERNAL_CONFIG dir
  • Always treat 1-bit partial parameters as unsigned

Config file changes

  • Add fingerprint for Heatit Smoke battery

Changes under the hood

  • Fixed some bot scripts that broke when switching to yarn

8.0.4 (2021-07-21)

Bugfixes

  • Multicast/Broadcast start/stopLevelChange now also works correctly via the setValue API
  • Fixed validation logic for the firmware update target to accept target 0 again
  • Fixed $import validation logic for device config files from the deviceConfigPriorityDir

8.0.3 (2021-07-20)

Bugfixes

  • Corrected the interview order of non-application CCs vs. application CCs on the root endpoint

8.0.2 (2021-07-20)

Bugfixes

  • When creating the fallback endpoint association on the root endpoint, an existing node association is now removed first

8.0.1 (2021-07-20) · „There are things out there that our little minds will never comprehend...”

...one of them being the Z-Wave specifications.
— H. G. Tannhaus (from „Dark”, probably)

Jokes aside, I'd like to use this release as an opportunity to look back on the history of Z-Wave JS. I started this project in 2018 out of frustration with the state of the open source Z-Wave ecosystem. I'm sure this sounds familiar to you if you're reading this. Little did I know what I was getting myself into. Originally, I just needed something that works for me, but decided to share it with the world.

Well, here we are. After...

  • almost 3.5 years,
  • over 4000 commits by over 150 contributors (including some bots),
  • about 2 million additions and deletions,
  • reading over 2000 pages of cryptic specifications
  • millions of log lines,
  • and investing more time that I feel comfortable knowing about,

I'm starting to understand why there are so few (good and open source) Z-Wave drivers available.

Nonetheless, Z-Wave JS is picking up momentum and is getting used used more and more, both by open source and commercial projects. A while ago, we added usage statistics (opt-in), so we have at least some idea of how many people are using Z-Wave JS. As of today, Z-Wave JS is powering over 5,000 Z-Wave networks all over the world with over 70,000 devices (that we know of).

This wouldn't have been possible without all the support I've gotten so far. I'd like to thank everyone who has supported me over the years, both financially and by contributing. A big shoutout is especially due to

What's next?
With this v8 release, most of the pain points from previous versions and concerning compatibility with legacy Z-Wave devices should finally be resolved. This opens up the opportunity to focus on new and exciting features. On that list are the long-awaited Security S2, SmartStart and eventually the new Z-Wave Long Range.

Road to certification
As you may already know, if you're planning to market a product or software with the official Z-Wave logos, certification is required for the entire product, from the hardware over the driver to the UI. In its current state, Z-Wave JS is not yet ready for certification (neither are the alternatives, for that matter). If your company is relying on Z-Wave JS, please consider paving that road by contributing to the project and/or sponsoring me. I'd love to be able to work full-time on Z-Wave JS and make it the first certified open source Z-Wave driver. While Z-Wave JS is free, your support will allow me to continue to make it better and reach that goal even faster.

TL;DR: Z-Wave JS rocks! You rock! Now let's take a look at the changelog...

Breaking changes · Migration guide

  • User codes are no longer queried during the interview in order to save battery
  • Restructured interview settings in ZWaveOptions
  • Reworked how endpoints and lifeline associations are handled
  • Removed neighbors property from ZWaveNode class and removed InterviewStage.Neighbors
  • Added missing node argument to nodes' "statistics updated" event
  • The minimum required Node.js version is now v12.22.2
  • The repository has been migrated from yarn v1 to yarn v3. This changes a few things, mainly regarding installing dependencies and editor support and might require manual intervention after updating the repo.
  • Change secondary exports to package.json subpath exports
  • Both fields in BatteryHealthReports may be undefined

Features

  • Support invokeCCAPI and supportsCCAPI on virtual nodes/endpoints (multicast/broadcast)
  • Added node method getFirmwareUpdateCapabilities to check which features of the Firmware Update CC a node supports before attempting the update
  • Add support for receiving Transport Service CC V2 encapsulated commands

Bugfixes

  • Improved error messages that explain why a firmware update failed
  • Multicast/Broadcast setValue now also accepts an options object
  • start/stopLevelChange now correctly works for multicast/broadcast
  • Added typesVersions to zwave-js/package.json, so TypeScript finds the subpath exports when used from consuming applications
  • The endpointIndizes value is now correctly marked as internal

Config file changes

  • Add Heatit ZM Single Relay 16A
  • Add metadata to Evolve products
  • Add config file for Aeotec ZWA011

Changes under the hood

  • Updated several dependencies
  • Config files can now use the ~/ prefix to refer to the config directory root