Skip to content

Latest commit

 

History

History
87 lines (56 loc) · 4.33 KB

pulsar.md

File metadata and controls

87 lines (56 loc) · 4.33 KB

Pulsar

Overview

The Airbyte Pulsar destination allows you to sync data to Pulsar. Each stream is written to the corresponding Pulsar topic.

Sync overview

Output schema

Each stream will be output into a Pulsar topic.

Currently, this connector only writes data with JSON format. More formats (e.g. Apache Avro) will be supported in the future.

Each record will contain in its key the uuid assigned by Airbyte, and in the value these 3 fields:

  • _airbyte_ab_id: a uuid assigned by Airbyte to each event that is processed.
  • _airbyte_emitted_at: a timestamp representing when the event was pulled from the data source.
  • _airbyte_data: a json blob representing with the event data encoded in base64 .
  • _airbyte_stream: the name of each record's stream.

Features

Feature Supported?(Yes/No) Notes
Full Refresh Sync No
Incremental - Append Sync Yes
Incremental - Deduped History No As this connector does not support dbt, we don't support this sync mode on this destination.
Namespaces Yes

Getting started

Requirements

To use the Pulsar destination, you'll need:

  • A Pulsar cluster 2.8 or above.

Setup guide

Network Access

Make sure your Pulsar brokers can be accessed by Airbyte.

Permissions

Airbyte should be allowed to write messages into topics, and these topics should be created before writing into Pulsar or, at least, enable the configuration in the brokers allowAutoTopicCreation (which is not recommended for production environments).

Note that if you choose to use dynamic topic names, you will probably need to enable allowAutoTopicCreation to avoid your connection failing if there was an update to the source connector's schema. Otherwise a hardcoded topic name may be best.

Also, notice that the messages will be sent to topics based on the configured Pulsar topic_tenant and topic_namespace configs with their topic_type.

Target topics

You can determine the topics to which messages are written via the topic_pattern configuration parameter in its corresponding Pulsar topic_tenant-topic_namespace. Messages can be written to either a hardcoded, pre-defined topic, or dynamically written to different topics based on the namespace or stream they came from.

To write all messages to a single hardcoded topic, enter its name in the topic_pattern field e.g: setting topic_pattern to my-topic-name will write all messages from all streams and namespaces to that topic.

To define the output topics dynamically, you can leverage the {namespace} and {stream} pattern variables, which cause messages to be written to different topics based on the values present when producing the records. For example, setting the topic_pattern parameter to airbyte_syncs/{namespace}/{stream} means that messages from namespace n1 and stream s1 will get written to the topic airbyte_syncs/n1/s1, and messages from s2 to airbyte_syncs/n1/s2 etc.

If you define output topic dynamically, you might want to enable allowAutoTopicCreation to avoid your connection failing if there was an update to the source connector's schema. Otherwise, you'll need to manually create topics in Pulsar as they are added/updated in the source, which is the recommended option for production environments.

NOTICE: a naming convention transformation will be applied to the target topic name using the StandardNameTransformer so that some special characters will be replaced.

Setup the Pulsar destination in Airbyte

You should now have all the requirements needed to configure Pulsar as a destination in the UI. You can configure the following parameters on the Pulsar destination (though many of these are optional or have default values):

  • Pulsar brokers
  • Use TLS
  • Topic type
  • Topic tenant
  • Topic namespace
  • Topic pattern
  • Test topic
  • Producer name
  • Sync producer
  • Compression type
  • Message send timeout
  • Max pending messages
  • Max pending messages across partitions
  • Enable batching
  • Batching max messages
  • Batching max publish delay
  • Block if queue is full

More info about this can be found in the Pulsar producer configs documentation site.