Skip to content

GameBoy cartridge dumper and simulator written for Arduino and Python

License

Notifications You must be signed in to change notification settings

Baekalfen/PyBoyCartridge

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

2 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

PyBoyCartridge

Abstract

Following the PyBoy project, which covered emulation of the Nintendo Game Boy, this project continues the development from another perspective. Emulation is the process of mimicking an existing system. To achieve a good or perfect emulation, one has to probe the existing system to find details, which might not have been documented. This could be an odd behavior, which has become part of the system, but not from the intention of the original design. This project takes on the aspect of physically interacting with a Game Boy, to advance the development of the emulator. The project will first focus dumping of game cartridges, by connecting it to a microcontroller and sequentially ask for each byte it stores. Afterwards, the process gets turned around to connect a microcontroller to the Game Boy as if it was a cartridge. This will open the possibility of running test code on the Game Boy to pinpoint the undocumented behavior.

Status

All the code could use a bit of streamlining, but it works as described in the report.

The cartridge-dumper seems to be working flawlessly for MBC 1,2 and 3. I haven't made any illustration of how to connect all the wires, but the code should be fairly self-explanatory. If somebody requests it, I'll write up some details on how to get started -- and don't hold back, just create an issue :)

Emulating cartridges still needs work - see the report. The short explanation is, that I couldn't get the code to trigger on the interrupt-pin. But the code is ready-to-go, if somebody gets it to be triggered at the right time. Because of the very slim reaction time, I wrote a few lines of AVR-assembler, but it's fairly straight forward. You possibly could get the same optimization in C, but I didn't want the uncertainty.

License

Creative Commons BY-NC-SA 4.0 http://creativecommons.org/licenses/by-nc-sa/4.0/

About

GameBoy cartridge dumper and simulator written for Arduino and Python

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages