Skip to content

BrancoLab/imgreg2D

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

26 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Imgreg2D

Simple napari based python application to register a 2D image to a template.

Installation

You can instal the code directly from Pypi using:

pip install imgreg2d

Alternative you can instal directly from the github repository with:

pip install git+https://github.com/BrancoLab/imgreg2D.git --upgrade

USAGE

To register an image to a template the user needs to specify the location of a set of points (>3, ideally at least 6) on both the reference and the registering image. These data are then used to compute an affine matrix which is then used to warp the registering image so that it matches the template.

For an example of how to perfom image registration, check example.py or read below:

Step 0 - import function and get the images

from imgreg2D.register import register
from imgreg2D.points import get_fixed_points

reference = 'media/original.jpg' # <- path to reference image
registering = 'media/rotated.jpg' # <- path to registering image

When we will call register we will have to pass the the reference and registering images. This can be done by passing file paths like in the code above or by passing np.ndarray with image data.

Step 1 - define points on reference image

To define the location of the points used for registration on the reference image (fixed_points) you can use get_fixed_points. If you already know the location of these points (e.g. because you already used the same template image), you can skip this step.

points = get_fixed_points(reference)

Once you've clicked on all the points you need, press q to close the viewer and proceed to the next step.

Step 2 - define points on registering image

Now you will have to click on the corresponding set of points in the registering image so that the affine transform can be computed. Remember, the order in which the points are defined is important: the first point you clicked in Step 1 has to correspond to the first point you'll define now. For this reason, you're shown a copy of your reference image with the location and sequence of fixed points. Once you've defined all the registering points the editor will close automatically and the analysis will proceed to the next step.

To start defining the registering points call:

register(reference, registering, fixed_points = points)

Note: if you already have a transform matrix (e.g. from a previous run of the registering step), you can skip this step. To skip Step 2 simply call:

warped_img, warp_mtx = register(reference, registering, warp_mtx = warp_mtx)

Note2: when calling register you can decide if you want to save the warp matrix or not. This could be use to save time the next time you need to register an image.

Step 3 - interactive refinement

Once you've defined the location of the registering points, the code will compute the affine transform (warp_mtx) and register your image. At this point another napari viewer will open which you can use to refine the accuracy of your transformation using the following hotkeys:

############################################################
##                REFINEMENT HOT KEYS                     ##
##                                                        ##
##    TRANSLATIONS                                        ##
##   ------------------------------------------------     ##
##      'a' -> negative x translation                     ##
##      'w' -> positive y translation                     ##
##                                                        ##
##      's' -> negative y translation                     ##
##      'd' -> positive x translation                     ##
##                                                        ##
##    SCALING                                            ##
##   ------------------------------------------------     ##
##      'r' -> positive x scaling                         ##
##      'f' -> negative x scaling                         ##
##                                                        ##
##      't' -> positive y scaling                         ##
##      'g' -> negative y scaling                         ##
##                                                        ##
##    SHEARS                                              ##
##   ------------------------------------------------     ##
##      'z' -> positive x shear                           ##
##      'x' -> negative x shear                           ##
##                                                        ##
##      'c' -> positive y shear                           ##
##      'v' -> negative y shear                           ##
##                                                        ##
############################################################

Once you're happy with your results, press y to complete the analysis (if you're not happy, press n and you can try again from Step 2). After Step 3 you'll have your registered image (warped_img) and your affine transform matrix (warp_mtx), enjoy!

Credit and contribution

The original code was part of Common-Coordinates-Behaviour (credit: Philip Shamash). The code was adapted to work with Napari.

Contributions are welcome! Just send a PR or open an issue as neeeded.

Releases

No releases published

Packages

No packages published

Languages