Skip to content
This repository has been archived by the owner on Nov 7, 2020. It is now read-only.
/ Antenna-analyzer Public archive

Creating a public prototype of the "SWR-mouse" antenna analyzer PCB compatible with the G403 (Gainta Industries) ready-made case.

License

Notifications You must be signed in to change notification settings

IgrikXD/Antenna-analyzer

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

48 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Antenna analyzer "SWR-mouse"

EasyEDA project for simple and quick assembly of the "SWR-mouse" antenna analyzer adapted for installation in the G403 case (Gainta Industries). The project includes the "SWR-mouse" antenna analyzer schematic and the PCB file. Version for mounting SMD components. Based on the submitted files, you can independently manufacture a PCB or order its manufacturing at the factory. In turn, I developed PCB for the independently manufacturing based on the existing circuit.

Current development progress:

Progress Progress
No longer supported, as a much more functional alternative to this device has appeared on the market - NanoVNA.

Current available implementations at EasyEDA platform:

Current available information articles:

How to use this repository?

In Datasheets and Schematics directories, you can find all necessary technical documentation for the used components and schematic files in PDF format. If you only need GERBER files, you can find them in the appropriate Gerbers directory. In the EasyEDA directory, you can find a list of files for implementing the ready device (files can be imported into EasyEDA editor). After that, based on submitted files, you can make the device independently or order printed circuit boards for factory manufacturing.

What is SWR?

Standing wave ratio (SWR) is used as a measure of impedance matching of a load to the characteristic impedance of a transmission line carrying RF signals. This especially applies to transmission lines connecting radio transmitters and receivers with their antennas. Impedance matching is achieved when the source impedance is the complex conjugate of the load impedance. When there is a mismatch between the load impedance and the transmission line, part of the forward wave sent toward the load is reflected back along the transmission line towards the source. The source then sees a different impedance than it expects which can lead to lesser power being supplied by it, the result is very sensitive to the electrical length of the transmission line.

Such a mismatch results in standing waves along the transmission line which magnifies transmission line losses. The SWR is a measure of the depth of those standing waves and is, therefore, a measure of the matching of the load to the transmission line. A matched load would result in an SWR of 1:1 implying no reflected wave. An infinite SWR represents complete reflection by a load unable to absorb electrical power, with all the incident power reflected back towards the source.

SWR is usually measured using a dedicated instrument called an SWR meter.

What is "SWR-mouse"?

The "SWR-mouse" antenna analyzer allows you to panoramically measure the SWR of antenna-feeder systems, determine the active resistance and the reactance modulus. The measurements are displayed on the Android or Windows device as a graph in the specified frequency ranges.

Basic device characteristics:

  • Frequency range: Depends on firmware (version 1.3: 1 - 450 MHz);
  • Power: USB type B, DC 5 V;
  • RF connector: SMA;
  • Feed line: 50 Ohm coaxial cable;
  • Interfaces for work: USB (Windows + power supply), Bluetooth (Android);
  • Compatible case: G403, Gainta Industries;

What was used in the development?

Source Description
UR5FFR • View topic - Антенный анализатор Si5351 SWR-mouse The original solution of the antenna analyzer "SWR-mouse" from the radio amateur UR5FFR. Article on the forum in Russian.
Антенный Анализатор UR5FFR на ARDUINO и Si5351 Video on YouTube from radio amateur R2AJI. It describes the process of manufacturing the "SWR-mouse" antenna analyzer circuit board for the G436/G407 case. In this version, there is an implementation of power supplying from a 18650 battery, a SO-239 connector, a Mini-USB power/data connector. Fixed PCB layout errors.
Standing wave ratio - Wikipedia An article on Wikipedia describing what SWR is.

Who helped me with the development of the project?

Great thanks to PCBWay for the $ 40 discount when ordering PCBs for the project. PCBWay-Logo

How to contact me?

About

Creating a public prototype of the "SWR-mouse" antenna analyzer PCB compatible with the G403 (Gainta Industries) ready-made case.

Topics

Resources

License

Stars

Watchers

Forks