Kafka-InfluxDB

A Kafka consumer for InfluxDB written in Python.
All messages sent to Kafka on a certain topic will be relayed to Influxdb.
Supports InfluxDB 0.9.x and up. For InfluxDB 0.8.x support,
check out the 0.3.0 tag.

Use cases

Kafka will serve as a buffer for your metric data during high load. Also it's useful for metrics from offshore data centers with unreliable connections to your monitoring backend.

Quickstart

To run the tool from your local machine:

pip install kafka_influxdb
kafka_influxdb -c config-example.yaml

Benchmark

To see the tool in action, you can start a complete CollectD -> Kafka -> kafka_influxdb -> Influxdb setup with the following command:

docker-compose up

This will immediately start reading messages from Kafka and write them into InfluxDB. To see the output, you can use the InfluxDB Admin Interface. Check on which port it is running with docker ps | grep tutum/influxdb. There should be a mapping like 32785->8083/tcp or so. In this case 32785 is the port where you can reach it. Then go to http://<docker_host_ip>:<port> and type SHOW MEASUREMENTS to see the output. (<docker_host_ip> is probably localhost on Linux. On Mac you can find out with boot2docker ip or docker-machine ip).

By default this will write 1.000.000 sample messages into the benchmark Kafka topic. After that it will consume the messages again to measure the throughput. Sample output using the above Docker setup inside a virtual machine:

Flushing output buffer. 10811.29 messages/s
Flushing output buffer. 11375.65 messages/s
Flushing output buffer. 11930.45 messages/s
Flushing output buffer. 11970.28 messages/s
Flushing output buffer. 11016.74 messages/s
Flushing output buffer. 11852.67 messages/s
Flushing output buffer. 11833.07 messages/s
Flushing output buffer. 11599.32 messages/s
Flushing output buffer. 11800.12 messages/s
Flushing output buffer. 12026.89 messages/s
Flushing output buffer. 12287.26 messages/s
Flushing output buffer. 11538.44 messages/s

For higher performance you can run kafka-influxdb on PyPy3. Currently this gives me around 50.000 msgs/s in my benchmarks.

Supported formats

You can write a custom encoder to support any input and output format (even fancy things like Protobuf). Look at the examples inside the encoder directory to get started. The following formats are officially supported:

Input formats

- Collectd Graphite ASCII format: :

mydatacenter.myhost.load.load.shortterm 0.45 1436357630

- Collectd JSON format: .. code-block:: json

[{

"values":[

0.6

], "dstypes":[ "gauge" ], "dsnames":[ "value" ], "time":1444745144.824, "interval":10.000, "host":"xx.example.internal", "plugin":"cpu", "plugin_instance":"1", "type":"percent", "type_instance":"system"

}]

Output formats

- InfluxDB 0.9.x line protocol format: :

load_load_shortterm,datacenter=mydatacenter,host=myhost value="0.45" 1436357630

• InfluxDB 0.8.x JSON format (deprecated)

Configuration

Take a look at the config-example.yaml to find out how to create a config file.
You can overwrite the settings from the commandline. The following parameters are allowed:

Option	Description
-h, --help	Show help message and exit
--kafka_host KAFKA_HOST	Hostname or IP of Kafka message broker (default: localhost)
--kafka_port KAFKA_PORT	Port of Kafka message broker (default: 9092)
--kafka_topic KAFKA_TOPIC	Topic for metrics (default: my_topic)
--kafka_group KAFKA_GROUP	Kafka consumer group (default: my_group)
--influxdb_host INFLUXDB_HOST	InfluxDB hostname or IP (default: localhost)
--influxdb_port INFLUXDB_PORT	InfluxDB API port (default: 8086)
--influxdb_user INFLUXDB_USER	InfluxDB username (default: root)
--influxdb_password INFLUXDB_PASSWORD	InfluxDB password (default: root)
--influxdb_dbname INFLUXDB_DBNAME	InfluxDB database to write metrics into (default: metrics)
--influxdb_use_ssl	Use SSL connection for InfluxDB (default: False)
--influxdb_verify_ssl	Verify the SSL certificate before connecting (default: False)
--influxdb_timeout INFLUXDB_TIMEOUT	Max number of seconds to establish a connection to InfluxDB (default: 5)
--influxdb_use_udp	Use UDP connection for InfluxDB (default: False)
--influxdb_retention_policy INFLUXDB_RETENTION_POLICY	Retention policy for incoming metrics (default: default)
--influxdb_time_precision INFLUXDB_TIME_PRECISION	Precision of incoming metrics. Can be one of 's', 'm', 'ms', 'u' (default: s)
--encoder ENCODER	Input encoder which converts an incoming message to dictionary (default: collectd_graphite_encoder)
--buffer_size BUFFER_SIZE	Maximum number of messages that will be collected before flushing to the backend (default: 1000)
-c CONFIGFILE, --configfile CONFIGFILE	Configfile path (default: None)
-s, --statistics	Show performance statistics (default: True)
-b, --benchmark	Run benchmark (default: False)
-v, --verbose	Set verbosity level. Increase verbosity by adding a v: -v -vv -vvv (default: 0)
--version	Show version

Alternatives

There is a Kafka input plugin and an InfluxDB output plugin for logstash. Currently InfluxDB 0.9 support is not part of the official logstash Influxdb output plugin (see this issue and this pull request)

There is a fork which supports Influxdb 0.9 and also allows us to set the InfluxDB measurement name from a field in the graphite string. We've achieved a message throughput of around 5000 messages/second with that setup. Check out the configuration at contrib/logstash/config.conf. You can run the benchmark yourself:

# Start the logstash docker-compose setup
docker-compose -f docker-compose-logstash.yml up -d
# Open an interactive shell to the logstash container
docker exec -it kafkainfluxdb_logstash_1 bash
# Run the benchmark
./run.sh

Please send a Pull Request if you know of other tools that can be mentioned here.