This repo now holds two configs for two printers.
The update script uses an environment variable to determine which printer it is. This is set by an environment variable PRINTER_NAME, which needs to be one of the folders in the repo, for this repo the printer name has to be either:
- cr10
- cr10s
Adding an evironment variable is as easy as ssh'ing into your pi, opening your bashrc file nano ~/.bashrc, scrolling to the bottom and adding the environment variable (for example export PRINTER_NAME=cr10). After you have saved the bashrc file, source it source ~/.bashrc and issuing echo $PRINTER_NAME should return the name you've entered.
- new thermistor setting
- added a bltouch --> virtual endstop
- bed mesh level config
- estep calibration updates
- split everything into seperate files. If you want to upload calibration settings,this is saved in the printer.cfg so only this needs to be updated.
- split everything into seperate folders.
- added new macros
To update klipper / dwc2 use manu7irl's script which you can find @ https://github.com/manu7irl/klipper-DWC2-installer