DFaaS: Decentralized Function-as-a-Service for Federated Edge

This repository holds DFaaS, a novel decentralized FaaS-based architecture designed to automatically and autonomously balance the traffic load across edge nodes belonging to federated Edge Computing ecosystems.

DFaaS implementation relies on an overlay peer-to-peer network and a distributed control algorithm that takes decisions on load redistribution. Although preliminary, our results confirm the feasibility of the approach, showing that the system can transparently redistribute the load across edge nodes when they become overloaded.

Our prototype is based on OpenFaaS and implements the control logic within Go P2P agents.

This research work is conducted by the INteraction and SemantIcs for Innovation with Data & Services (INSID&S) Laboratory of the University of Milano - Bicocca.

If you wish to reuse this source code, please consider citing our article describing the first prototype:

Michele Ciavotta, Davide Motterlini, Marco Savi, Alessandro Tundo
DFaaS: Decentralized Function-as-a-Service for Federated Edge Computing,
2021 IEEE 10th International Conference on Cloud Networking (CloudNet), DOI: 10.1109/CloudNet53349.2021.9657141.

Scenario

The above figure depicts the considered network scenario. A set of geographically-distributed FaaS-enabled edge nodes (or simply edge nodes) is deployed at the edge of the access network.

Each of these nodes deploys a DFaaS platform for the execution of serverless functions, and is connected to a wireless or wired access point (e.g. a base station, a broadband network gateway, a WiFi access point, etc.).

The edge node can receive functions' execution requests, in the form of HTTP requests, generated by the users served by the access point.

Architecture

Prototype

This prototype relies on HAProxy to implement the proxy component, and on faasd 0.16.0 (a lightweight version of OpenFaaS) to implement the FaaS platform.

Also, we exploit Sysbox, an open-source and free container runtime (a specialized "runc") that enhances containers in two key ways:

• improves container isolation
• enables containers to run same workloads as VMs

Thanks to Sysbox we are able to run our prototype as a standalone Docker container that executes our agent, the HAProxy and faasd all together. This way, we can run several emulated edge nodes by simply executing multiple Docker containers.

Requirements

• Ubuntu 20.04 LTS
• containerd 1.6.4
• Docker CE 20.10.16
• Sysbox CE 0.5.2

Setup environment using the convenience script

The script has 3 arguments:

• 1st arg: Sysbox CE version
• 2nd arg: shiftfs branch

This scripts assumes you are using Ubuntu 20.04 LTS with kernel version 5.4.

./setup-environment 0.5.2 k5.4

Manual

Docker CE v20.10.16

You can follow the official user guide.

Sysbox CE 0.5.2

You can follow the official user guide.

We do not recommend to set up sysbox-runc as your default container, you can skip that part of the guide.

We instead recommend installing shiftfs according to your kernel version as suggested by the Sysbox CE user guide.

Build Docker images

# Paths assume you are executing from the project root directory
docker build -t dfaas-agent-builder:latest -f docker/dfaas-agent-builder.dockerfile dfaasagent
docker build -t dfaas-node:latest -f docker/dfaas-node.dockerfile docker

Run a 3 nodes network via Docker Compose

See the provided docker-compose.yml file for technical details.

docker compose up -d

Deploy functions

This script deploy the same set of functions on each of the nodes by using docker/files/deploy_functions.sh. The deploy_functions.sh script waits for the OpenFaaS gateway to be up (max 20 retries, 10s delay), then deploys 3 functions (ocr, shasum, figlet) from the OpenFaas store.

The script has 3 arguments:

• 1st arg: number of nodes (e.g., 3)
• 2nd arg: node name prefix (e.g., dfaas-node-)
• 3rd arg: node name suffix (e.g., -1)

The resulting node name (container) will be dfaas-node-1-1, that is, the default name you get when using the provided docker-compose.yml file.

./utils/deploy-functions-to-nodes.sh 3 "dfaas-node-" "-1"

Invoke a function

Each node exposes port 808x:80 (e.g., node-1 exposed port is 8081:80), where port 80 is the HAProxy port. This example assumes you run DFaaS nodes via Docker Compose with the provided docker-compose.yml file.

You can invoke a function (i.e., via the first node) by simply contact the proxy on http://localhost:8081/function/{function_name}.

curl http://localhost:8081/function/figlet -d 'Hello DFaaS world!'

Execute workload to a node using vegeta

We provide an example that use vegeta HTTP load testing tool to run workload on a node and demonstrate the load distribution over the federation.

You can install vegeta by executing the following commands:

wget https://github.com/tsenart/vegeta/releases/download/v12.8.4/vegeta_12.8.4_linux_amd64.tar.gz
tar -xf vegeta_12.8.4_linux_amd64.tar.gz && rm vegeta_12.8.4_linux_amd64.tar.gz
sudo mv vegeta /usr/local/bin/

This example uses the vegeta json format and requires jq.

In a nutshell:

• it runs a vegeta attack (duration: 5 minutes, rate: 50 req/s) to the figlet function on the first node
• it saves the results and produces report ever 200ms

# Create the vegeta results directory
mkdir -p vegeta-results
export VEGFOLDER="vegeta-results/$(date +%Y-%m-%d-%H%M%S)"
mkdir -p $VEGFOLDER

jq -ncM '{method: "GET", url: "http://localhost:8081/function/figlet", body: "Hello DFaaS world!" | @base64, header: {"Content-Type": ["text/plain"]}}' | \
  vegeta attack -duration=5m -rate=50 -format=json | \
  tee $VEGFOLDER/results.bin | \
  vegeta report -every=200ms

Create plots from vegeta results

You can produce some plots from vegeta results by exploiting the vegeta plot command or our utils/plot.py script. To use our script, you need to install the required Python packages listed in utils/plot-requirements.txt.

# Encode results as JSON
cat $VEGFOLDER/results.bin | vegeta encode > $VEGFOLDER/results.json

# Create plot with vegeta
cat cat $VEGFOLDER/results.bin | vegeta plot > $VEGFOLDER/plot.html

# 1st arg: path int results.json
# 2nd arg: path output plot
# 3rd arg: rate req/s used for the attack
./utils/plot.py $VEGFOLDER/results.json $VEGFOLDER/plot.png 50

Forwarding traffic as a malicious node

You can impersonate a malicious node that is not part of the federation by adding the header Dfaas-Node-Id with a value that is not a valid peer id of the network (e.g., Dfaas-Node-Id: malicious-id). All of its requests will be rejected.

Troubleshooting

# Substitute the CONTAINER_NAME value with the desired container name
export CONTAINER_NAME="dfaas-node-1-1"
docker exec -it ${CONTAINER_NAME} bash
journalctl --follow --unit dfaasagent # ...or whatever you prefer to inspect (e.g., haproxy, faasd, faasd-provider)

Emulator

For a complex setup running several emulated edge nodes with different topologies see emulator directory. We provide instructions and examples to execute DFaaS nodes via Containernet emulator.

Simulator

We also provide a simulator to test and compare different load balancing techniques. The simulation code is available into the simulation directory. Data gathered by the DFaaS system used for simulation are available here.

For more information read associated README file.