Skip to content

My personal collection of sketches made with vsketch

License

Notifications You must be signed in to change notification settings

abey79/sketches

Repository files navigation

sketches

My collection of personal plotter generative art sketches made with vsketch and whiskers. Sketches made with vsketch can generally be run and interacted with using the following command:

$ vsk run hline

Some additional dependencies might be needed, including but not limited to:

The sketches made with whiskers can be run and interacted with using the following commands:

$ cd hex_cells
$ cargo run --release

A working installation of Rust is needed.

Disclaimer: Though I wrote it, note that this code doesn't necessarily match my standards—here the end justifies the means :)

The code is available under the MIT license and the artworks under CC BY-NC-SA 4.0.


hex_cells

My #ptpx23 postcards. First sketch made with whiskers on this repo.

0D3A2129_2048 0D3A2131_2048


layers

Quick and dirty sketch to serve as banner for my article on layers, vpype, and the Axidraw.


kare

Tribute to Susan Kare's iconic work on the early Macintosh. These were my #ptpx22 postcards. Made with vpype-pixelart.


snowflake

A quick-and-dirty snowflake generator for Xmas giftwrap decoration.

xmas gifts decorated with plotted generative snowflakes


world

Rotating earth, 280-frame loop I made to illustrate my article on the Automatic #plotloop Machine.

Here is a video of the process:

And the resulting loop:


warp

Hyperspace jump, 200-frame loop made automatically with a couple of Raspberry Pi, some LEGOs and a Doit script.

Highly compressed/dithered, 40-fps GIF:

Other versions:

  • Uncompressed 4-fps GIF here.
  • YouTube version at the intended 120 fps here.

fill_test

Details here.


machine_typography

17 letters for 17 recipients. This is my winter '21-'22 #ptpx contribution.

IMG_1676_2200

image image


postcard

Helper sketch to create postcards with addresses and a custom message. Very useful for #ptpx.

Instructions:

  1. Create the following files next to the sketch script:
  • addresses.txt: all the addresses, separated by two new lines
  • header.txt: header text (typically, your address)
  • message.txt: postcard message, may contain $FirstName$, which will be replaced as you expect
  1. Run the sketch: vsk run postcard
  2. Adjust the parameters and your message until everything looks good, then save a configuration (my_config)
  3. Export all SVGs: vsk save --config my_config --param addr_id 0..8 postcard (adjust the address ID range as needed)

image

Added Jan. 2023: support for bitmap font rendering using the Monocraft font:


liquid_neon

Small experiment which combined the neon module sets with some deformation filter that would eventually become the squiggles command.

image


drift_poly

My design for early 2021 #ptpx. The config for the 9 cards I made are included in the repo.


dots

Just a bunch of dots drawn with vsk.point() on a regular grid. Sometime they are skipped, sometime in a different color.


random_lines

That's 500k Perlin noise values obtained in a single call of noise().


circular_patterns


fish


hline


perlin agents

About

My personal collection of sketches made with vsketch

Topics

Resources

License

Stars

Watchers

Forks