This library allows your code to control an MCP2221 or MCP2221A over USB for the purposes of talking I2C for using the GPIO pins. It doesn't support the UART feature of the MCP2221 although PRs are welcome.
I2C traits from the embedded-hal are used, allowing relatively easy switching between this I2C interface and something like linux-embedded-hal for devices that are supported directly by the kernel.
This library has only been tested on Linux, but it uses rusb to access the USB bus and that supports other platforms, so there's a moderate chance it will work on more than just Linux.
See examples/scan_bus.rs.
The hid-mcp2221 kernel driver may interfere with the operation of this library.
It's recommended to unload it or unbind the device. e.g. Create
/etc/udev/rules.d/71-mcp.rules with the following content:
SUBSYSTEM=="usb", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="00dd", GROUP="plugdev", TAG+="uaccess", RUN="/bin/sh -c 'echo -n $kernel > /sys/bus/usb/drivers/usbhid/unbind'"
This rule also allows access to the device by the user physically logged into the computer (uaccess) and to anyone in the plugdev group.
See docs/contributing.md.
This is not an officially supported Google product.
This project is licensed under either of
- Apache License, Version 2.0, (LICENSE-APACHE or https://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or https://opensource.org/licenses/MIT)
at your option.