Skip to content

Official GitHub Action for OSSF Scorecards.

Notifications You must be signed in to change notification settings

aidenwang9867/scorecard-action

 
 

Repository files navigation

Scorecards' GitHub action

CodeQL codecov

Official GitHub Action for OSSF Scorecards.

The Scorecards GitHub Action is free for all public repositories. Private repositories are supported if they have GitHub Advanced Security. Private repositories without GitHub Advanced Security can run Scorecards from the command line by following the standard installation instructions.

Breaking changes in v2

Starting from scorecard-action:v2, GITHUB_TOKEN permissions needs to incude token_id: write for publish_results: true. This is needed to access GitHub's OIDC token whuch verifies the authenticity of the result when publishing it.


Installation

View Results

Manual Action Setup


The following GitHub triggers are supported: push, schedule (default branch only).

The pull_request and workflow_dispatch triggers are experimental.

Running the Scorecard action on a fork repository is not supported.

Private repositories need a Personal Access Token (PAT).

Public repositories need a PAT to enable the Branch-Protection check. Without a PAT, Scorecards will run all checks except the Branch-Protection check.

GitHub Enterprise repositories are not supported.

Installation

The Scorecards Action is installed by setting up a workflow on the GitHub UI.

Private repositories: Scorecards requires authentication using a Personal Access Token (PAT). So if you install Scorecards on a private repository, you will need to follow the optional Authentication step. If you don't, Scorecards will fail to run.

Public repositories: One Scorecards check (Branch-Protection) requires authentication using a Personal Access Token (PAT). If you want all Scorecards checks to run on a public repository, you will need to follow the optional Authentication step. If you don't, all checks will run except Branch-Protection.

Optional Authentication: Create a Personal Access Token (PAT) for authentication and save the token value as a repository secret. (Note: If you have already installed Scorecards on your repository from the command line, you can reuse your existing PAT for the repository secret. If you no longer have access to the PAT, though, simply create a new one.)

Required: Set up the workflow via the GitHub UI - see Workflow Setup

Authentication with PAT

  1. Create a Personal Access Token with the following read permissions:
    • Note: Read-only token for OSSF Scorecard Action - myorg/myrepo (Note: replace myorg/myrepo with the names of your organization and repository so you can keep track of your tokens.)
    • Expiration: No expiration
    • Scopes:
      • repo > public_repo Required to read Branch-Protection settings. Note: for private repositories, you need scope repo.
      • admin:org > read:org Optional: not used in current implementation.
      • admin:repo_hook > read:repo_hook Optional: needed for the experimental Webhook check.
      • write:discussion > read:discussion Optional: not used in current implementation.

image

  1. Copy the token value.

  2. Create a new repository secret with the following settings:

    • Name: SCORECARD_READ_TOKEN
    • Value: the value of the token created in step 1 above.
  3. (Optional) If you install Scorecard on a repository owned by an organization that uses SAML SSO, be sure to enable SSO for your PAT token.

Workflow Setup

  1. From your GitHub project's main page, click “Security” in the top ribbon.

image

  1. Click “Set up Code Scanning.”

image

Note: if you have already configured other code scanning tools, your UI will look different than shown above. Instead, click "Code Scanning Alerts" on the left side of the page.

image

Then click "Add More Scanning Tools."

image

  1. Choose the "OSSF Scorecards supply-chain security analysis" from the list of workflows, and then click “set up this workflow.”

image

  1. Commit the changes.

image

View Results

The workflow is preconfigured to run on every repository contribution. After making a code change, you can view a list of results by going to the Security tab and clicking "Code Scanning Alerts" (it can take a couple minutes for the run to complete and the results to show up). Click on the individual alerts for more information, including remediation instructions. You will need to click "Show more" to expand the full remediation instructions.

image

Verify Runs

The workflow is preconfigured to run on every repository contribution.

To verify that the Action is running successfully, click the repository's Actions tab to see the status of all recent workflow runs. This tab will also show the logs, which can help you troubleshoot if the run failed.

image

Troubleshooting

If the run has failed, the most likely reason is an authentication failure. If you are running Scorecards on a private repository, confirm that the Personal Access Token is saved as an encrypted secret within the same repository (see Authentication). In addition, provide the repo scope to your PAT. (The repo > public_repo scope only provides access to public repositories).

If you install Scorecards on a repository owned by an organization that uses SAML SSO or if you see 403 Resource protected by organization SAML enforcement in the logs, be sure to enable SSO for your PAT token (see Authentication).

If you use a PAT saved as an encrypted secret and the run is still failing, confirm that you have not made any changes to the workflow yaml file that affected the syntax. Review the workflow example and reset to the default values if necessary.

Manual Action Setup

If you prefer to manually set up the Scorecards GitHub Action, you will need to set up a workflow file.

First, create a new file in this location: [yourrepo]/.github/workflows/scorecards-analysis.yml. Then use the input values below.

Inputs

Name Required Description
result_file yes The file that contains the results.
result_format yes The format in which to store the results [json | sarif]. For GitHub's scanning dashboard, select sarif.
repo_token yes PAT token with read-only access. Follow these steps to create it.
publish_results recommended This will allow you to display a badge on your repository to show off your hard work (release scheduled for Q2'22). See details here.

Publishing Results

The Scorecard team runs a weekly scan of public GitHub repositories in order to track the overall security health of the open source ecosystem. The results of the scans are publicly available. Setting publish_results: true replaces the results of the team's weekly scans with your own scan results, helping us scale by cutting down on repeated workflows and GitHub API requests. This option is also needed to enable badges on the repository (release scheduled for Q2'22).

Uploading Artifacts

The Scorecards Action uses the artifact uploader action to upload results in SARIF format to the Actions tab. These results are available to anybody for five days after the run to help with debugging. To disable the upload, comment out the Upload Artifact value in the Workflow Example.

Note: if you disable this option, the results of the Scorecards Action run will be available only to maintainers (on the Security tab scanning dashboard).

Workflow Example

name: Scorecards supply-chain security
on:
  # Only the default branch is supported.
  branch_protection_rule:
  schedule:
    # Weekly on Saturdays.
    - cron: '30 1 * * 6'
  push:
    branches: [ main, master ]

# Declare default permissions as read only.
permissions: read-all

jobs:
  analysis:
    name: Scorecards analysis
    runs-on: ubuntu-latest
    permissions:
      # Needed to upload the results to code-scanning dashboard.
      security-events: write
      # Used to receive a badge. (Upcoming feature)
      id-token: write
      actions: read
      contents: read
    
    steps:
      - name: "Checkout code"
        uses: actions/checkout@a12a3943b4bdde767164f792f33f40b04645d846 # v3.0.0
        with:
          persist-credentials: false

      - name: "Run analysis"
        uses: ossf/scorecard-action@3e15ea8318eee9b333819ec77a36aca8d39df13e # v1.1.1
        with:
          results_file: results.sarif
          results_format: sarif
          # (Optional) Read-only PAT token. Uncomment the `repo_token` line below if:
          # - you want to enable the Branch-Protection check on a *public* repository, or
          # - you are installing Scorecards on a *private* repository
          # To create the PAT, follow the steps in https://github.com/ossf/scorecard-action#authentication-with-pat.
          # repo_token: ${{ secrets.SCORECARD_READ_TOKEN }}

          # Publish the results for public repositories to enable scorecard badges. For more details, see
          # https://github.com/ossf/scorecard-action#publishing-results. 
          # For private repositories, `publish_results` will automatically be set to `false`, regardless 
          # of the value entered here.
          publish_results: true

      # Upload the results as artifacts (optional). Commenting out will disable uploads of run results in SARIF
      # format to the repository Actions tab.
      - name: "Upload artifact"
        uses: actions/upload-artifact@6673cd052c4cd6fcf4b4e6e60ea986c889389535 # v3.0.0
        with:
          name: SARIF file
          path: results.sarif
          retention-days: 5
      
      # Upload the results to GitHub's code scanning dashboard.
      - name: "Upload to code-scanning"
        uses: github/codeql-action/upload-sarif@5f532563584d71fdef14ee64d17bafb34f751ce5 # v1.0.26
        with:
          sarif_file: results.sarif

About

Official GitHub Action for OSSF Scorecards.

Resources

Security policy

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 96.7%
  • Dockerfile 2.0%
  • Other 1.3%