Skip to content

bestouff/genext2fs

Repository files navigation

GENEXT2FS

genext2fs - ext2 filesystem generator for embedded systems

SYNOPSIS

genext2fs [ options ] [ output-image ]

DESCRIPTION

genext2fs generates an ext2 filesystem as a normal (non-root) user. It does not require you to mount the image file to copy files on it, nor does it require that you become the superuser to make device nodes.

The filesystem image is created in the file output-image. If not specified, it is sent to stdout. The -d and -a options support reading from stdin if a single hyphen is given as an argument. Thus, genext2fs can be used as part of a pipeline without any temporary files.

By default, the maximum number of inodes in the filesystem is the minimum number required to accommodate the initial contents. In this way, a minimal filesystem (typically read-only) can be created with minimal free inodes. If required, free inodes can be added by passing the relevant options. The filesystem image size in blocks can be minimised by trial and error.

OPTIONS

-x, --starting-image image

Use this image as a starting point.

-d, --root directory[:path]

Add the given directory and contents at a particular path (by default the root).

-D, --devtable spec-file[:path]

Use spec-file to specify inodes to be added, at the given path (by default the root), including files, directories and special files like devices. If the specified files are already present in the image, their ownership and permission modes will be adjusted accordingly (this can only occur when the -D option appears after the options that create the specified files). Furthermore, you can use a single table entry to create many devices with a range of minor numbers (see examples below). All specified inodes receive the mtime of spec-file itself.

-a, --tarball file[:path]

Add the given archive (tarball) contents at a particular path (by default the root). If file is a hyphen, then the tarball will be read from standard input. Note: if not compiled with libarchive, genext2fs will use a builtin tarball parser with very primitive capabilities (e.g. no sparse file support, generally no support other than for modern GNU tar without fancy options).

-b, --size-in-blocks blocks

Size of the image in blocks.

-B, --block-size bytes

Size of a filesystem block in bytes.

-N, --number-of-inodes inodes

Minimum number of inodes. The required inode number will be computed automatically for all input that is not read from stdin. The number given by this option sets the minimum number of inodes. If you add anything from standard input, you should set this value because in that case the required number of inodes cannot be precomputed. The value set by this option will be overwritten by the value computed from the -i option, if the resulting number of inodes is larger.

-L, --volume-label name

Set the volume label for the filesystem.

-i, --bytes-per-inode ratio

Used to calculate the minimum number of inodes from the available blocks. Inodes are computed by multiplying the number of blocks (-b) by the blocksize (1024) and dividing that by the ratio given in this option. If the result is larger, then the number of required inodes counted from the input or the minimum number of inodes from the -N option, then the value computed by this option is used.

-m, --reserved-percentage N

Number of reserved blocks as a percentage of size. Reserving 0 blocks will prevent creation of the lost+found directory.

-o, --creator-os name

Value for creator OS field in superblock.

-g, --block-map path

Generate a block map file for this path.

-e, --fill-value value

Fill unallocated blocks with value.

-z, --allow-holes

Make files with holes.

-f, --faketime

Use a timestamp of 0 for inode and filesystem creation, instead of the present. Useful for testing.

-q, --squash

Squash permissions and owners (same as -P -U).

-U, --squash-uids

Squash ownership of inodes added using the -d option, making them all owned by root:root.

-P, --squash-perms

Squash permissions of inodes added using the -d option. Analogous to umask 077.

-v, --verbose

Print resulting filesystem structure.

-V, --version

Print genext2fs version.

-h, --help

Display help.

EXAMPLES

genext2fs -b 1440 -d src /dev/fd0

All files in the src directory will be written to /dev/fd0 as a new ext2 filesystem image. You can then mount the floppy as usual.

genext2fs -b 1024 -d src -D devicetable.txt flashdisk.img

This example builds a filesystem from all the files in src, then device nodes are created based on the contents of the file devicetable.txt. Entries in the device table take the form of:

          <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>

where name is the file name and type can be one of:

          f    A regular file
          d    Directory
          c    Character special device file
          b    Block special device file
          p    Fifo (named pipe)

uid is the user id for the target file, gid is the group id for the target file. The rest of the entries (major, minor, etc) apply only to device special files.

An example device file follows:

          # name    type mode uid gid major minor start inc count

          /dev      d    755  0    0    -    -    -    -    -
          /dev/mem  c    640  0    0    1    1    0    0    -
          /dev/tty  c    666  0    0    5    0    0    0    -
          /dev/tty  c    666  0    0    4    0    0    1    6
          /dev/loop b    640  0    0    7    0    0    1    2
          /dev/hda  b    640  0    0    3    0    0    0    -
          /dev/hda  b    640  0    0    3    1    1    1    16
          /dev/log  s    666  0    0    -    -    -    -    -

This device table creates the /dev directory, a character device node /dev/mem (major 1, minor 1), and also creates /dev/tty, /dev/tty[0-5], /dev/loop[0-1], /dev/hda, /dev/hda1 to /dev/hda15 and /dev/log socket.