Skip to content

blaghed/docker-rdp-calibre

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

67 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Intention:

  • Exposes the 9090 port
  • Enables the auto-updater by default via EDGE=1 (can be disabled with EDGE=0)
  • Allows setting the direct Calibre version to use via VERSION variable (e.g.: VERSION="3.48.0") Rest is the same as the base aptalca image.

Calibre GUI and Server

Run the Calibre X app accessible in a web browser

Install On unRaid:

On unRaid, install from the Community Repositories and enter the app folder location and the port for the webUI.

Install On Other Platforms (like Ubuntu, Synology 5.2 DSM, etc.):

On other platforms, you can run this docker with the following command:

docker run -d --name="RDP-Calibre" -e EDGE="0" -e WIDTH="1280" -e HEIGHT="720" -v /path/to/config:/config:rw -e TZ=America/New_York -p XXXX:8080 -p YYYY:8081 aptalca/docker-rdp-calibre

Setup Instructions

  • Replace the variable "/path/to/config" with your choice of folder on your system. That is where the config and the library files will reside, and they will survive an update, reinstallation, etc. of the container.
  • Change "XXXX" to a port of your choice, it will be the port for the main Calibre GUI
  • Change "YYYY" to a port of your choice, it will be the port for the Calibre webserver
  • If you would like to have the latest updates, change the EDGE variable to "1", and the container will update calibre to the latest version every time it is restarted
  • If you'd like to change the resolution for the GUI, you can modify the WIDTH and HEIGHT variables
  • IMPORTANT: On first start, select "/config" as the library location in the Calibre wizard
  • Calibre webserver can be enabled from the calibre gui under Preferences/Sharing over the net. Port has to be set to 8081

You can access the GUI by pointing your web browser to http://SERVERIP:XXXX/#/client/c/Calibre

You can access the Calibre webserver by pointing your web browser to http://SERVERIP:YYYY

(Replace SERVERIP, XXXX and YYYY with your values)

Advanced Features (only for docker pros)

(Deprecated)Custom library location:

If you would like to change the library location you need to do a couple of things:

  • First add a new mount point for the library location in the docker run command. Example: -v /path/to/library:/library:rw
  • Then add an environment variable (LIBRARYINTERNALPATH) to specify the internal library location for the webserver. Example: -e LIBRARYINTERNALPATH="/library"
  • When you fire up calibre the first time select your library location. Example: /library

(Deprecated)Url Prefix for reverse proxy:

  • Add an environment variable (URLPREFIX) to docker run to specify the url prefix for the webserver. Example: -e URLPREFIX="/calibre"
  • To access the webserver, go to http://SERVERIP:YYYY/calibre

Changelog:

  • 2017-06-24: LIBRARYINTERNALPATH and URLPREFIX variables are deprecated. They were required for the calibre webserver. The new webserver should be enabled from the calibre gui under Preferences/Sharing over the net. Port has to be set to 8081
  • 2016-09-16: Remove X1-lock if exists, which prevents start up following an unclean shutdown
  • 2016-09-15: Updated base to x11rdp1.3, which now supports clipboard through the left hand side menu (ctrl+alt+shift) - calibre updated to 2.67

About

Full Calibre GUI and webserver accessible in a web browser

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Dockerfile 68.0%
  • Shell 32.0%