Skip to content

caseyjamesdavis/FLIR-A310-IR-Camera-Modbus-Logger

Repository files navigation

What is it:

Log temperature data from FLIR A310 IR camera(s) to a CSV file(s) using Python.

How to use it:

  1. Install the pyModbusTCP Python library.
  2. Get the IP address for each FLIR camera of interest.
  3. In flir_a310_log_data_via_modbus.py:
    • Adjust the csv_header list for the number of cameras.
    • Adjust the ip_list list to match the number and addresses of cameras.
    • Set the reg variable for desired data object in the camera.
  4. Run flir_a310_log_data_via_modbus.py on a device that can connect to the cameras.

Results:

I have tested this with four cameras and a one second log interval in an industrial setting with great success.

Notes:

  • The A310 only appears to update these registers several times per second.
  • This may work with other FLIR cameras that can connect to a network via ethernet, but I haven't tried it.

Credits:

Many thanks to sourceperl for the pyModbusTCP Python library.