Skip to content

Deploy Ceph with minimal infrastructure, using just SSH access

License

Notifications You must be signed in to change notification settings

ceph/ceph-deploy

Repository files navigation

ceph-deploy -- Deploy Ceph with minimal infrastructure

ceph-deploy is a way to deploy Ceph relying on just SSH access to the servers, sudo, and some Python. It runs fully on your workstation, requiring no servers, databases, or anything like that.

If you set up and tear down Ceph clusters a lot, and want minimal extra bureaucracy, this is for you.

This README provides a brief overview of ceph-deploy, for thorough documentation please go to https://docs.ceph.com/projects/ceph-deploy/en/latest/

What this tool is not

It is not a generic deployment system, it is only for Ceph, and is designed for users who want to quickly get Ceph running with sensible initial settings without the overhead of installing Chef, Puppet or Juju.

It does not handle client configuration beyond pushing the Ceph config file and users who want fine-control over security settings, partitions or directory locations should use a tool such as Chef or Puppet.

Installation

Depending on what type of usage you are going to have with ceph-deploy you might want to look into the different ways to install it. For automation, you might want to bootstrap directly. Regular users of ceph-deploy would probably install from the OS packages or from the Python Package Index.

Python Package Index

If you are familiar with Python install tools (like pip and easy_install) you can easily install ceph-deploy like:

pip install ceph-deploy

or:

easy_install ceph-deploy

It should grab all the dependencies for you and install into the current user's environment.

We highly recommend using virtualenv and installing dependencies in a contained way.

DEB

All new releases of ceph-deploy are pushed to all ceph DEB release repos.

The DEB release repos are found at:

http://ceph.com/debian-{release}
http://ceph.com/debian-testing

This means, for example, that installing ceph-deploy from http://ceph.com/debian-giant will install the same version as from http://ceph.com/debian-firefly or http://ceph.com/debian-testing.

RPM

All new releases of ceph-deploy are pushed to all ceph RPM release repos.

The RPM release repos are found at:

http://ceph.com/rpm-{release}
http://ceph.com/rpm-testing

Make sure you add the proper one for your distribution (i.e. el7 vs rhel7).

This means, for example, that installing ceph-deploy from http://ceph.com/rpm-giant will install the same version as from http://ceph.com/rpm-firefly or http://ceph.com/rpm-testing.

bootstrapping

To get the source tree ready for use, run this once:

./bootstrap

You can symlink the ceph-deploy script in this somewhere convenient (like ~/bin), or add the current directory to PATH, or just always type the full path to ceph-deploy.

SSH and Remote Connections

ceph-deploy will attempt to connect via SSH to hosts when the hostnames do not match the current host's hostname. For example, if you are connecting to host node1 it will attempt an SSH connection as long as the current host's hostname is not node1.

ceph-deploy at a minimum requires that the machine from which the script is being run can ssh as root without password into each Ceph node.

To enable this generate a new ssh keypair for the root user with no passphrase and place the public key (id_rsa.pub or id_dsa.pub) in:

/root/.ssh/authorized_keys

and ensure that the following lines are in the sshd config:

PermitRootLogin without-password
PubkeyAuthentication yes

The machine running ceph-deploy does not need to have the Ceph packages installed unless it needs to admin the cluster directly using the ceph command line tool.

usernames

When not specified the connection will be done with the same username as the one executing ceph-deploy. This is useful if the same username is shared in all the nodes but can be cumbersome if that is not the case.

A way to avoid this is to define the correct usernames to connect with in the SSH config, but you can also use the --username flag as well:

ceph-deploy --username ceph install node1

ceph-deploy then in turn would use ceph@node1 to connect to that host.

This would be the same expectation for any action that warrants a connection to a remote host.

Managing an existing cluster

You can use ceph-deploy to provision nodes for an existing cluster. To grab a copy of the cluster configuration file (normally ceph.conf):

ceph-deploy config pull HOST

You will usually also want to gather the encryption keys used for that cluster:

ceph-deploy gatherkeys MONHOST

At this point you can skip the steps below that create a new cluster (you already have one) and optionally skip installation and/or monitor creation, depending on what you are trying to accomplish.

Creating a new cluster

Creating a new configuration

To create a new configuration file and secret key, decide what hosts will run ceph-mon, and run:

ceph-deploy new MON [MON..]

listing the hostnames of the monitors. Each MON can be

  • a simple hostname. It must be DNS resolvable without the fully qualified domain name.
  • a fully qualified domain name. The hostname is assumed to be the leading component up to the first ..
  • a HOST:FQDN pair, of both the hostname and a fully qualified domain name or IP address. For example, foo, foo.example.com, foo:something.example.com, and foo:1.2.3.4 are all valid. Note, however, that the hostname should match that configured on the host foo.

The above will create a ceph.conf and ceph.mon.keyring in your current directory.

Edit initial cluster configuration

You want to review the generated ceph.conf file and make sure that the mon_host setting contains the IP addresses you would like the monitors to bind to. These are the IPs that clients will initially contact to authenticate to the cluster, and they need to be reachable both by external client-facing hosts and internal cluster daemons.

Installing packages

To install the Ceph software on the servers, run:

ceph-deploy install HOST [HOST..]

This installs the current default stable release. You can choose a different release track with command line options, for example to use a release candidate:

ceph-deploy install --testing HOST

Or to test a development branch:

ceph-deploy install --dev=wip-mds-now-works-no-kidding HOST [HOST..]

Proxy or Firewall Installs

If attempting to install behind a firewall or through a proxy you can use the --no-adjust-repos that will tell ceph-deploy to skip any changes to the distro's repository in order to install the packages and it will go straight to package installation.

That will allow an environment without internet access to point to its own repositories. This means that those repositories will need to be properly setup (and mirrored with all the necessary dependencies) before attempting an install.

Another alternative is to set the wget env variables to point to the right hosts, for example, put following lines into /root/.wgetrc on each node (since ceph-deploy runs wget as root):

http_proxy=http://host:port
ftp_proxy=http://host:port
https_proxy=http://host:port

Deploying monitors

To actually deploy ceph-mon to the hosts you chose, run:

ceph-deploy mon create HOST [HOST..]

Without explicit hosts listed, hosts in mon_initial_members in the config file are deployed. That is, the hosts you passed to ceph-deploy new are the default value here.

Gather keys

To gather authenticate keys (for administering the cluster and bootstrapping new nodes) to the local directory, run:

ceph-deploy gatherkeys HOST [HOST...]

where HOST is one of the monitor hosts.

Once these keys are in the local directory, you can provision new OSDs etc.

Deploying OSDs

To prepare a node for running OSDs, run:

ceph-deploy osd create HOST:DISK[:JOURNAL] [HOST:DISK[:JOURNAL] ...]

After that, the hosts will be running OSDs for the given data disks. If you specify a raw disk (e.g., /dev/sdb), partitions will be created and GPT labels will be used to mark and automatically activate OSD volumes. If an existing partition is specified, the partition table will not be modified. If you want to destroy the existing partition table on DISK first, you can include the --zap-disk option.

If there is already a prepared disk or directory that is ready to become an OSD, you can also do:

ceph-deploy osd activate HOST:DIR[:JOURNAL] [...]

This is useful when you are managing the mounting of volumes yourself.

Admin hosts

To prepare a host with a ceph.conf and ceph.client.admin.keyring keyring so that it can administer the cluster, run:

ceph-deploy admin HOST [HOST ...]

Forget keys

The new and gatherkeys put some Ceph authentication keys in keyrings in the local directory. If you are worried about them being there for security reasons, run:

ceph-deploy forgetkeys

and they will be removed. If you need them again later to deploy additional nodes, simply re-run:

ceph-deploy gatherkeys HOST [HOST...]

and they will be retrieved from an existing monitor node.

Multiple clusters

All of the above commands take a --cluster=NAME option, allowing you to manage multiple clusters conveniently from one workstation. For example:

ceph-deploy --cluster=us-west new
vi us-west.conf
ceph-deploy --cluster=us-west mon

FAQ

Before anything

Make sure you have the latest version of ceph-deploy. It is actively developed and releases are coming weekly (on average). The most recent versions of ceph-deploy will have a --version flag you can use, otherwise check with your package manager and update if there is anything new.

Why is feature X not implemented?

Usually, features are added when/if it is sensible for someone that wants to get started with ceph and said feature would make sense in that context. If you believe this is the case and you've read "what this tool is not" and still think feature X should exist in ceph-deploy, open a feature request in the ceph tracker: http://tracker.ceph.com/projects/ceph-deploy/issues

A command gave me an error, what is going on?

Most of the commands for ceph-deploy are meant to be run remotely in a host that you have configured when creating the initial config. If a given command is not working as expected try to run the command that failed in the remote host and assert the behavior there.

If the behavior in the remote host is the same, then it is probably not something wrong with ceph-deploy per-se. Make sure you capture the output of both the ceph-deploy output and the output of the command in the remote host.

Issues with monitors

If your monitors are not starting, make sure that the {hostname} you used when you ran ceph-deploy mon create {hostname} match the actual hostname -s in the remote host.

Newer versions of ceph-deploy should warn you if the results are different but that might prevent the monitors from reaching quorum.

Developing ceph-deploy

Now that you have cracked your teeth on Ceph, you might find that you want to contribute to ceph-deploy.

Resources

Bug tracking: http://tracker.ceph.com/projects/ceph-deploy/issues

Mailing list and IRC info is the same as ceph http://ceph.com/resources/mailing-list-irc/

Submitting Patches

Please add test cases to cover any code you add. You can test your changes by running tox (You will also need mock and pytest ) from inside the git clone

When creating a commit message please use git commit -s or otherwise add Signed-off-by: Your Name <email@address.dom> to your commit message.

Patches can then be submitted by a pull request on GitHub.