The Zombie Microservices Workshop introduces the basics of building serverless applications using AWS Lambda, Amazon API Gateway, Amazon DynamoDB, Amazon Cognito, Amazon SNS, and other AWS services. In this workshop, as a new member of the AWS Lambda Signal Corps, you are tasked with completing the development of a serverless survivor communications system during the Zombie Apocalypse.
This workshop has a baseline survivor chat app that is launched via CloudFormation. Complete the lab exercises to extend the functionality of the communications system or add your own custom functionality!
Prior to beginning the labs, you will need to finalize the setup of User authentication for the application with Cognito User Pools. This is a necessary step to finalize the readiness of the application.
In this setup lab, you will integrate user authentication into your serverless survivor chat application using Amazon Cognito User Pools.
Each of the labs in this workshop is an independent section and you may choose to do some or all of them, or in any order that you prefer.
-
Lab 1: Typing Indicator
This exercise already has the UI and backend implemented, and focuses on how to setup the API Gateway to provide a RESTful endpoint. You will configure the survivor chat application to display which survivors are currently typing in the chat room.
-
Lab 2: SMS Integration with Twilio
This exercise uses Twilio to integrate SMS text functionality with the survivor chat application. You will configure a free-trial Twilio phone number so that users can send text messages to the survivor chat application. You'll learn to leverage mapping templates in API Gateway to perform data transformations in an API.
-
Lab 3: Search Integration with Elasticsearch
This exercise adds an Elasticsearch cluster to the application which is used to index chat messages streamed from the DynamoDB table containing chat messages.
-
Lab 4: Slack Integration
This exercise integrates the popular messaging app, Slack, into the chat application so that survivors can send messages to the survivor chat from within the Slack app.
-
Lab 5: Intel Edison Zombie Motion Sensor (IoT device required)
This exercise integrates motion sensor detection of zombies to the chat system using an Intel Edison board and a Grove PIR Motion Sensor. You will configure a Lambda function to consume motion detection events and push them into the survivor chat!
This section provides instructions to tear down your environment when you're done working on the labs.
Prior to launching a stack, be aware that a few of the resources launched need to be manually deleted when the workshop is over. When finished working, please review the "Workshop Cleanup" section to learn what manual teardown is required by you.
1. To begin this workshop, click one of the 'Deploy to AWS' buttons below for the region you'd like to use. This is the AWS region where you will launch resources for the duration of this workshop. This will open the CloudFormation template in the AWS Management Console for the region you select.
| Region | Launch Template |
|---|---|
| N. Virginia (us-east-1) |  |
| Oregon (us-west-2) | |
| Ireland (eu-west-1) | |
| Frankfurt (eu-central-1) | |
| Tokyo (ap-northeast-1) | |
| Seoul (ap-northeast-2) | |
| Singapore (ap-southeast-1) | |
| Sydney (ap-southeast-2) | |
If you have CloudFormation launch FAILED issues, please try launching in us-east-1 (Virginia)
2. Once you have chosen a region and are inside the AWS CloudFormation Console, you should be on a screen titled "Select Template". We are providing CloudFormation with a template on your behalf, so click the blue Next button to proceed.
3. On the following screen, "Specify Details", your Stack is pre-populated with the name "zombiestack". You can customize that to a name of your choice less than 15 characters in length or leave as is. For the parameters section, if you want to develop with a team and would like to create IAM Users in your account to grant your teammates access, then specify how many teammates/users you want to be created in the NumberOfTeammates text box. Otherwise, leave it defaulted to 0 and no additional users will be created. The user launching the stack (you) already have the necessary permissions. Click Next.
If you create IAM users, an IAM group will also be created and those users will be added to that group. On deletion of the stack, those resources will be deleted for you.
4. On the "Options" page, leave the defaults and click Next.
5. On the "Review" page, verify your selections, then scroll to the bottom and select the checkbox I acknowledge that AWS CloudFormation might create IAM resources. Then click Create to launch your stack.
6. Your stack will take about 3 minutes to launch and you can track its progress in the "Events" tab. When it is done creating, the status will change to "CREATE_COMPLETE".
7. Click the "Outputs" tab in CloudFormation and click the link for "MyChatRoomURL". This should open your chat application in a new tab. Leave this tab open as you'll come back to it later.
Please continue to the next section for the required Cognito User Pools authentication setup.
The survivor chat uses Amazon Cognito for authentication. Cognito Federated Identity enables you to authenticate users through an external identity provider and provides temporary security credentials to access your app’s backend resources in AWS or any service behind Amazon API Gateway. Amazon Cognito works with external identity providers that support SAML or OpenID Connect, social identity providers (such as Facebook, Twitter, Amazon) and you can also integrate your own identity provider.
In addition to federating 3rd party providers such as Facebook, Google, and other providers, Cognito also offers a new built-in Identity Provider called Cognito User Pools.
A Cognito Federated Identity pool has already been created for you when you launched CloudFormation.
You will now setup the Cognito User Pool as the user directory of your chat app survivors and configure it as a valid Authentication Provider with the Cognito Federated Identity Pool. API Gateway has been configured with IAM Authorization to only allow requests that are signed with valid AWS permissions. When a user signs into the Survivor Chat App (User Pool) successfully, a web call is made to the Cognito Federated Identity Pool to assume temporary AWS credentials for your authenticated user. These credentials are used to make signed AWS SigV4 HTTPS requests to your message API.
Let's get started...
1. Navigate to the Cognito service console.
Cognito User Pools is not available in all AWS regions. Therefore if you launched your CloudFormation stack in any region other than us-east-1 (Virginia), us-west-2 (Oregon), eu-west-1 (Ireland), or ap-northeast-1 (Tokyo), then please use the top navigation bar in the management console to switch AWS regions and navigate to us-east-1 (Virginia) to configure Cognito. Your application will stay hosted in the region you launched the CloudFormation template, but the authentication with Cognito will reside in us-east-1. If you launched the Cloudformation stack in one of those regions listed above, then please simply navigate to the Cognito service in the management console as the service is available in that region already.
When inside the Cognito service console, click the blue button Manage your User Pools. You will setup the user directory that your chat application users will authenticate to when they use your app.
2. Click the blue button Create a User Pool in the upper right corner. You'll create a new user directory.
3. In the "Pool Name" text box, name your user pool [Your CloudFormation stack name]-userpool. For example, if you named your CloudFormation stack "sample" earlier, then your user pool name would be "sample-userpool". After naming your User Pool, click Step through Settings to continue with manual setup.
4. On the attributes page, select the required checkbox for the following attributes: email, name, phone number.
- Cognito User Pools allows you to define attributes that you'd like to associate with users of your application. These represent values that your users will provide when they sign up for your app. They are available to your application as a part of the session data provided to your client apps when users authenticate with Cognito.
5. Click the link "Add custom attribute". Leave all the defaults and type a "Name" of slackuser exactly as typed here. Add 2 additional custom attributes, slackteamdomain and camp.
- Within a User Pool, you can specify custom attributes which you define when you create the User Pool. For the Zombie Survivor chat application, we will include 3 custom attributes.
Your attributes configuration should match the image below:
Click Next Step.
6. On the Policies page, leave the Password policy settings as default and click Next step.
7. On the verifications page, leave the defaults for the first two sections and scroll down to the section titled Do you want to customize your email verification message?
Add a custom email subject such as "Signal Corps Survivor Confirmation". We won't modify the message body but you could add your own custom message in there. We'll let Cogntio send the emails from the service email address, but in production you could configure Cognito to send these verifications from an email server you own.
Click Next step.
- We will not require MFA for this application. However, for during sign up we are requiring verification via email address. This is denoted with the email checkbox selected for "Do you want to require verification of emails or phone numbers?". With this setting, when users sign up for the application, a confirmation code will be sent to their email which they'll be required to input into the application for confirmation.
8. On the Devices page, leave the default option of "No" selected. We will not configure the User Pool to remember user's devices.
9. On the Apps page, click Add an app. In the App Name textbox, type "Zombie Survivor Chat App" and deselect the client secret checkbox. Click Set attribute read and write permissions. You need to give the app "writable" access to the custom attributes you created. Select the Writable Attributes checkboxes for the attributes custom:slackuser, custom:slackteamdomain, and custom:camp Leave the rest of the defaults and click Create App, then click Next step.
10. In the dropdowns for the Pre authentication and Post confirmation triggers, select the Lambda function named "[Your CloudFormation Stack name]-CognitoLambdaTrigger-[Your Region]". Click Next step.
-
Cognito User Pools allows developers to inject custom workflow logic into the signup and signin process. This custom workflow logic is represented with AWS Lambda functions known as Lambda Triggers.
-
With this feature, developers can pass information to a Lambda function and specify that function to invoke at different stages of the signup/signin process, allowing for a serverless and event driven authentication process.
-
In this application, we will create two (2) Lambda triggers:
-
Post-Confirmation: This trigger will invoke after a user successfully submits their verification code upon signup and becomes a confirmed user. The Lambda function associated with this trigger takes the attributes provided by the user and inserts them into a custom Users table in DynamoDB that was created with CloudFormation. This allows us to perform querying of user attributes within our application.
-
Pre-Authentication: This trigger will invoke when a user's information is submitted for authentication to Cognito each time the survivor signs into the web application. The code for with this Lambda Trigger takes the user's attributes have been passed in as parameters from the invoking User Pool and using them to perform an update on the User's record in DynamoDB Users table. This allows us to load the user's data into DynamoDB when they initially sign in and also keep it current with the values in User Pools in an on-going basis as they log in each time.
-
For this workshop we use the same backend Lambda function for both of the triggers. On invocation, the function checks what type of even has occurred, Post-Confirmation or Pre-Authentication, and executes the correct code accordingly.
-
11. Review the settings for your User Pool and click Create pool. If your pool created successfully you should be returned to the Pool Details page.
12. Open a text editor on your computer and copy into it the "Pool Id" displayed on the Pool details page. Then click into the Apps tab found on the left side navigation pane. You should see an App client id displayed. Copy that App client id into your text editor as well.
You are done configuring the User Pool. You will now setup federation into the Cognito Identity Pool that has already been created for you.
-
An Amazon Cognito Identity Pool has been configured for you. Identity Pools allow external federated users to assume temporary credentials from AWS to make service API calls from within your apps.
-
You've just created the User Pool for authentication into your app. Now your users still need access to make IAM Authorized AWS API calls.
-
You'll setup federation inside of Cognito Identity and allow your User Pool as an Authentication Provider.
On the top navigation bar in the management console, switch to Federated Identities by clicking the link as shown below.
13. Click into the Identity Pool that has already been created for you. It should be named "[Your CloudFormation stack name] _ identitypool". On the Idenity pool dashboard, in the upper right, select Edit identity pool.
14. Cognito Identity allows you to give access to both authenticated users and unauthenticated (guest) users. The permissions associated with these groups of users is dictated by the IAM role that you attach to these Cognito roles. Your Authenticated and Unauthenticated Cognito roles have already been configured for you in CloudFormation. The Authenticated role has been configured to give permissions to the principal (your Cognito authenticated application user) to make "execute-api:invoke" calls to the API Gateway endpoint ARNs associated with the survivor serverless app.
- When users authenticate into the application, they become an authenticated user, and the application allows them to send chat messages to the survivor chat.
15. Click the black dropdown arrow in the section titled "Authentication providers". You will configure your Identity pool to allow federated access from your Identity Provider, your Cognito User Pool. In the "Cognito" identity provider tab, insert your User Pool ID and App Client ID into their respective text boxes from your text editor file. Do not delete them from the text file, you'll need these items again in a later step.
You should have copied these from your User Pool earlier when you set it up. If you do not have these copied, please navigate back to your Cognito User Pool you created earlier and locate your User Pool Id and App Client ID.
Scroll to the bottom of the page and click Save Changes to save the User Pool configuration settings. Your Cognito User Pool is now setup to federate into your Identity Pool and assume temporary credentials for users who authenticate into the app.
16. You will now make an update to an application config file so that the serverless Javascript application can communicate with your User Pool to log users in.
Navigate to the Amazon S3 console in the region where you launched your CloudFormation stack.
- If you changed regions to configure Cognito, please return back to the region where you launched the stack and navigate to the S3 service.
17. On the Amazon S3 buckets listing page, find and click into the bucket that was created for you by CloudFormation. It should be named with your stack name prepended to the beginning. Something like [CloudFormation Stack Name]-s3bucketforwebsitecontent"....
18. This bucket contains all the contents for hosting your serverless JS app as well as the source code for the workshop's Lambda functions and CloudFormation resources. Please do not delete these contents. Click into the folder (prefix) named "S3" and finally to the file S3/assets/js/constants.js
Download the S3/assets/js.constants.js file to your local machine and open it with a text editor.
19. Open up the constants.js file and copy over the User Pool ID into the "USER_POOL_ID" variable. Then copy the App Client ID into the "CLIENT_ID" variable. These should be copied from the open text file you had open from earlier.
-
The JS application uses the values in this file to determine the runtime variables necessary to communicate with the different services of the workshop.
-
The Identity Pool Id was automatically filled in with several other variables when the CloudFormation template was launched.
20. Save the constants.js file and upload it back to S3. In the S3 console window, click the blue Upload button and upload the constants.js file from your local machine. Make sure to click "Set Details->SetPermissions" and select the checkbox "Make everything public". Then click Start Upload and it should overwrite the old constants file with the new one. Make sure you are uploading the file back to the same directory where you originally downloaded it from.
- Your application now has the configuration it needs to interact with Cognito.
21. Navigate back to CloudFormation and find the Chat Room URL (MyChatRoomURL) in the Outputs tab of your CloudFormation stack. Click it to open the chat application in a new browser window.
- If you already had the application opened in your browser, please refresh the page so that the new constants.js loads with the app.
22. You should see a sign in page for the Zombie survivor web app. You need to create an account so click Sign Up.
23. Fill out the form.
-
Select your Camp: Specify the geography where you live! Currently this attribute is not used in the application and is available for those that want to tackle an extra credit opportunity!. When you're done with the workshop, try and tackle the Channel Challenge in the Appendix.
-
Slack Username: Type the Slack Username you will use during the Slack lab of this workshop. This associates your Slack username with your Survivor app user account and is required if you want to do the Slack lab.
-
Slack Team Domain Name: Slack users can be members of many teams. Type the Slack team domain name that you want to integrate with this survivor chat app. The combination of a Slack team domain and Slack Username will unique identity a user to associate with your new Survivor chat app account.
When done, click Sign Up.
24. A form should appear asking you to type in your confirmation code. Please check your inbox for the email address you signed up with. You should received an email with the subject "Signal Corps Survivor Confirmation" (May be in your Spam folder!). Copy over the verification code and enter into the confirmation window.
After confirming your account, sign in with your credentials and begin chatting!
25. Your messages should begin showing up in the central chat pane window. Feel free to share the URL with your teammates, have them signup for accounts and begin chatting as a group! If you are building this solution solo, you can create multiple user accounts with different email addresses. Then login to both user accounts in different browsers to simulate multiple users.
The baseline chat application is now configured and working! There is still important functionality missing and the Lambda Signal Corps needs you to build it out...so get started below!
This workshop does not utilize API Gateway Cache. Please KEEP THIS FEATURE TURNED OFF as it is not covered under the AWS Free Tier and will incur additional charges. It is not a requirement for the workshop.
What you'll do in this lab...
In this section you will create functionality that shows which survivors are currently typing in the chat room. To enable this, you'll modify the newly created API with Lambda functions to push typing metadata to a DynamoDB table that contains details about which survivors are typing. The survivor chat app continuously polls this API endpoint to determine who is typing. The typing indicator shows up in the web chat client in a section below the chat message panel. The UI and backend Lambda functions have been implemented, and this lab focuses on how to enable the feature in API Gateway.
The application uses CORS. This lab will both wire up the backend Lambda function as well as perform the necessary steps to enable CORS.
Typing Indicator Architecture
1. Select the API Gateway Service from the main console page
2. Select the Zombie Workshop API Gateway.
3. Go into the /zombie/talkers/GET method flow. Do this by clicking the "GET" method under the /zombie/talkers resource. This is highlighted in blue in the image below.
This GET HTTP method is used by the survivor chat app to perform continuous queries on the DynamoDB talkers table to determine which users are typing.
4. Click the Integration Request box.
5. Under "Integration Type", Select Lambda Function.
- Currently, this API method is configured to a "MOCK" integration. MOCK integrations are dummy backends that are useful when you are testing and don't yet have the backend built out but need the API to return sample dummy data. You will remove the MOCK integration and configure this GET method to connect to a Lambda function that queries DynamoDB.
6. For the Lambda Region field, select the region in which you launched the CloudFormation stack. (HINT: Select the region code that corresponds with the yellow CloudFormation button you clicked to launch the CloudFormation template). For example if you launched your stack in Virginia (us-east-1), then you will select us-east-1 as your Lambda Region.
- When you launched the CloudFormation template, it also created several Lambda functions for you locally in the region you selected, including functions for retrieving data from and putting data into a DynamoDB "Talkers" table with details about which survivors are currently typing in the chat room.
7. For the Lambda Function field, begin typing "gettalkers" in the text box. In the auto-fill dropdown, select the function that contains "GetTalkersFromDynamoDB" in the name. It should look something like this.... [CloudformationTemplateName]-[XXXXXXX]-GetTalkersFromDynamoDB-[Your Region].
- This Lambda function is written in NodeJs. It performs GetItem DynamoDB requests on a Table called Talkers. This talkers table contains records that are continuously updated whenever users type in the chat room. By hooking up this Lambda function to your GET method, it will get invoked by API Gateway when the chat app polls the API with GET requests.
8. Select the blue Save button and click OK if a pop up asks you to confirm that you want to switch to Lambda integration. Then grant access for API Gateway to invoke the Lambda function by clicking "OK" again. This 2nd popup asks you to confirm that you want to allow API Gateway to be able to invoke your Lambda function.
9. Click the Method Response section of the Method Execution Flow. You'll now tell API Gateway how what types of HTTP response types you want your API to expose.
10. Add a 200 HTTP Status response. Click "Add Response", type "200" in the status code text box and then click the little checkmark to save the method response, as shown below.
- You've configured the GET method of the /talkers resource to allow responses with HTTP status of 200. We could add more response types but we'll skip that for simplicity in this workshop.
11. Go to the /zombie/talkers/POST method by clicking the "POST" option in the resource tree on the left navigation pane.
12. Perform Steps 4-10 again as you did for the GET method. However, this time when you are selecting the Lambda Function for the Integration Request, you'll type "writetalkers" in the auto-fill and select the function that looks something like this... [CloudformationTemplateName]-[XXXXXXX]-GetTalkersFromDynamoDB-[Your Region]
- In these steps you are configuring the POST method that is used by the chat app to insert data into DynamoDB Talkers table with details about which users are typing. You're performing the same exact method configuration for the POST method as you did for your GET method. However, since this POST method is used for sending data to the database, it triggers a different backend Lambda function. This function writes data to DynamoDB while the "GetTalkersToDynamoDB" function was used to retrieve data from DynamoDB.
13. Go to the /zombie/talkers/OPTIONS method
14. Select the Method Response.
15. Add a 200 method response. Click "Add Response", type "200" in the status code text box and then click the little checkmark to save the method response.
16. Go back to the OPTIONS method flow and select the Integration Response. (To go back, there should be a blue hyperlink titled "Method Execution" which will bring you back to the method execution overview screen).
17. Select the Integration Response.
18. Add a new Integration response with a method response status of 200. Click the "Method response status" dropdown and select "200". (leaving the regex box blank). When done, click the blue Save button.
- In this section you configured the OPTIONS method simply to respond with HTTP 200 status code. The OPTIONS method type is simply used so that clients can retrieve details about the API resources that are available as well as the methods associated with them. Think of this as the mechanism that allows clients to query the API to learn what "Options" are available to them.
19. Select the /zombie/talkers resource on the left navigation tree.
20. Click the "Actions" box and select "Enable CORS" in the dropdown.
21. Select Enable and Yes to replace the existing values. You should see all green checkmarks for the CORS options that were enabled, as shown below.
- If you don't see all green checkmarks, this is probably because you forgot to add the HTTP Status 200 code for the Method Response Section. Go back to the method overview section for your POST, GET, and OPTIONS method and make sure that it shows "HTTP Status: 200" in the Method Response box.
22. Click the "Actions" box and select Deploy API
23. Select the ZombieWorkshopStage deployment and hit the Deploy button.
- In this workshop we deploy the API to a stage called "ZombieWorkshopStage". In your real world scenario, you'll likely deploy to stages such as "production" or "development" which align to the actual stages of your API development process.
LAB 1 COMPLETE
As you type, POST requests are being made to the Talkers DynamoDB table to continuously update the table with timestamps for who is typing. Continuous polling (GET Requests) on that table also occurs to check which survivors are typing, which updates the "Users Typing" field in the web app.
What you'll do in this lab...
In this section, you’ll create a free-trial Twilio SMS phone number. You will configure this Twilio phone number with a webhook to forward all incoming text messages sent to your Twilio number to the /zombie/twilio API resource in API Gateway. This will allow you to communicate with survivors in the chat room via text message.
SMS Twilio Integration Architecture
1. Sign up for a free trial Twilio account at https://www.twilio.com/try-twilio. Or if you have an existing Twilio account, login.
2. Once you have created your account, login to the Twilio console and navigate to the Home icon on the left navigation pane. On the Home screen/console dashboard, scroll down to the Phone Numbers section and click "Phone Numbers".
3. On the Phone Numbers screen, click "Get Started" to assign a phone number to your account. Then click the red "Get your first Twilio phone number" button. We’re going to generate a 10-digit phone number in this lab, but a short-code would also work if preferred. This number should be enabled for voice and messaging by default. A popup will appear with your new phone number, if the proposed phone number supports messaging, click "Choose this number" and go to the next step. If the proposed phone number does not support messaging, click "Search for a different number", select your country and select the checkbox "SMS", then click "Search". Twilio propose a list of phone number, select "Choose number" for one of them. Then, type your address, click "Save and continue" and "Done".
These are US phone numbers. You can provision an international phone number if doing this workshop outside the U.S. Twilio terms and conditions and pricing applies. Please see their website for those details.
4. Once you’ve received a phone number, click the Manage Numbers button on the left navigation pane. Click on your phone number, which will take you to the properties page for that number.
5. Scroll to the bottom of the properties page, to the Messaging section. In the Configure With dropdown, select the Webhooks/TwiML option. Leave this page open for now and proceed to the next step.
- The Twilio webhooks section allows you to integrate your phone number with third party services. In this case, you're going to configure your Twilio phone number to forward any messages sent to that number to your API Gateway endpoint with POST HTTP requests.
6. Now you’ll retrieve your /zombie/twilio API endpoint from API Gateway and provide it to Twilio to hook up to AWS. Open the AWS Management console in a new tab, and navigate to API Gateway, as illustrated below. Be sure to leave the Twilio tab open as you’ll need it again to finish setup.
7. In the API Gateway console, select your API, Zombie Workshop API Gateway. On the left navigation tree, click Stages.
8. With "Stages" selected, expand the "Zombie Workshop Stage" by clicking the blue arrow, and select the POST method for the /zombie/twilio resource. The /zombie/twilio resource is the endpoint that CloudFormation created specifically for SMS integration with Twilio. You should see an Invoke URL displayed for your /zombie/twilio resource, as shown below.
9. Copy the Invoke URL and return to the Twilio website. On the Twilio page that you left open, paste the Invoke URL from API Gateway into the text box next to the label A message comes in. Ensure that the request type is set to HTTP POST. This is illustrated below.
10. Click Save to finalize the setup connecting Twilio to your API.
11. You will now create the Lambda Function that processes your incoming Twilio messages, parses them, and pushes them to the "/messages" Chat Service. To begin, navigate to the Lambda console.
- As you'll see throughout this workshop, we will leverage separate Lambda functions to pre-process data before sending standardized/formatted requests to the /zombie/message resource. This allows us to-reuse the existing DynamoDB logic behind the /message resource multiple times rather than writing multiple functions that all interact with DynamoDB individually. As messages come in to your Twilio number, the Twilio webhook forwards them as POSTs to your /zombie/twilio resource, which will be integrated with a backend pre-processing Lambda function. This function will strip apart the Twilio payload and format it before making a signed SigV4 HTTPS POST to your /zombie/message service which requires IAM authorization.
12. Click Create a Lambda function and select Skip on the blueprint screen as we will be creating a brand new function. Click Next to skip through the Configure Triggers screen.
13. Create a name for the function, such as "[Your CloudFormation stack name]-TwilioProcessing". Leave the "Runtime" as Node.js 4.3. From the GitHub repo, open the TwilioProcessing.js file. Copy the entire contents from this file into the Lambda code entry section. Once you have copied the code into Lambda, scroll down to line 8 in the code where the "API" variable is declared. API.endpoint should show a value of "INSERT YOUR API GATEWAY URL HERE INCLUDING THE HTTPS://". Please replace this string with the fully qualified domain name (FQDN) of the URL for your /zombie/message POST method found in API Gateway. For example, it should look something like "https://xxxxxxxx.execute-api.us-west-2.amazonaws.com".
You should also fill in the region code in the variable API.region. This should be the region where you launched CloudFormation.
Finally you will also copy in the name of your DynamoDB Users table that was created for you. This should be placed in the table variable. You will also need to copy in the name of your "phoneindex" (this is an index that was created on the DynamoDB table to assist with querying). These attributes can be found in the Outputs section in CloudFormation. You should be copying the values for DynamoDBUsersTableName and DynamoDBUsersPhoneIndex from CloudFormation.
- Many of the functions in this workshop are authored in Nodejs 0.10 but will work regardless of the version of Node you choose when creating your Function in the console. The workshop will soon be upgraded to use Nodejs 4.3.
14. After you have copied the code into the Lambda inline code console and modified the variables, scroll down to the Lambda function handler and role section. Choose an existing role should be selected from the dropdown. Then for the existing role, select the role that looks like [Your stack name]-ZombieLabLambdaRole.... For simplicity we are reusing the same Lambda role for our functions.
15. Set the timeout field to 30 seconds and keep all the rest of the defaults set. Then click Next and then Create function on the Review page to create your Lambda function.
- You have just created a Lambda function that accepts the querystring params from the incoming API Gateway /twilio endpoint, converts the parameters to the correct format for our Chat Service including a conversion to JSON format, and finally makes an HTTPS POST request to the /zombie/message Chat Service endpoint. That endpoint will take care of inserting the data into the DynamoDB messages table.
16. Now that you have created the TwilioProcessing function, you need to connect it to the POST method for your /zombie/twilio endpoint. Navigate back to the API Gateway console and select POST under the /twilio endpoint.
17. On the Method Execution screen for the "POST" method, the "Integration Request" box should show a type of MOCK for your /twilio resource.
18. You will now change the Integration Request so that instead of integrating with a Mock integration, it will integrate with your TwilioProcessing function. Click Integration Request. On the Integration Request screen, change the "Integration type" radio button to Lambda Function. In the "Lambda Region" dropdown, select the region in which you created your TwilioProcessing Lambda function, and where you launched your CloudFormation Stack. For the Lambda Function, begin typing "TwilioProcessing" and the autofill should display your function. Select your TwilioProcessing function from the autofill. Click Save. In the popup window, confirm that you want to switch to Lambda Integration by clicking OK. Then confirm that you want to give API Gateway permission to invoke your function by clicking OK. Wait a few seconds for the changes to save.
19. After clicking Save, you will be brought back to the Method Execution page for your "POST" method. Return back to the Integration Request screen so that you can configure a Mapping Template. To do this, click Integration Request in the Method Execution screen.
20. Twilio sends data from their API with a content-type of "application/x-www-form-urlencoded", but Lambda requires the content-type to be "application/json" for any payload parameters sent to it. You will configure a Mapping Template so that API Gateway converts the content type of incoming messages into JSON before executing your backend Lambda TwilioProcessing function with the parameters.
21. On the Integration Request screen for your /twilio POST method, expand the Body Mapping Templates section and click Add mapping template. In the textbox for "Content-Type", input application/x-www-form-urlencoded and click the little checkmark button to continue. Once you have clicked the little checkbox, a popup window will appear asking if you want to only allow requests that match the Content-Type you specificed. Click Yes, secure this integration. A new section will appear on the right side of the screen with a dropdown for Generate Template. Click that dropdown and select Method Request Passthrough.
22. A "Template" text editor window will appear. In this section you will input a piece of VTL transformation logic to convert the incoming Twilio data to a JSON object. In this text editor, delete all of the pre-filled content and copy the following code into the editor.
{"postBody" : "$input.path('$')"}
After copying the code into the editor, click the Save button. You have now setup the POST method to convert the incoming data to JSON anytime a POST request is made to your /twilio endpoint with a Content-Type of "application/x-www-form-urlencoded". This should look like the screenshot below:
23. Now that you have configured the Integration Request to transform incoming messages into JSON, we need to configure the Integration Response to transform outgoing responses back to Twilio into XML format since the Twilio API requires XML as a response Content-Type. This step is required so that when you send SMS messages to the survivor Chat Service, it can respond back to your Twilio Phone Number with a confirmation message that your message was received successfully.
24. Head back to the Method Execution screen for the twilio POST method. On the "Method Execution" screen for your /twilio POST method, click Integration Response. On the "Integration Response" screen, click the black arrow to expand the method response section. Expand the Body Mapping Templates section. You should see a Content-Type of "application/json". We need a Content-Type of XML, not JSON, so delete this Content-Type by clicking the little black minus icon and click Delete on the pop-up window.
25. Click Add mapping template similar to the way you did this in the earlier steps for the Integration Request section.
26. In the "Content-Type" text box, insert application/xml and click the little black checkmark to continue. Similar to the steps done earlier, we are going to copy VTL mapping logic to convert the response data to XML from JSON. This will result in your /twilio POST method responding to requests with XML format. After you have created the new content-type, a new section will appear on the right side of the screen with a dropdown for Generate Template. Click that dropdown and select Method Request Passthrough. In the text editor, delete all the code already in there and copy the following into the editor:
#set($inputRoot = $input.path('$'))
<?xml version="1.0" encoding="UTF-8"?>
<Response>
<Message>
<Body>
$inputRoot
</Body>
</Message>
</Response>
Click the grey "Save" button to continue.
The result should look like the screenshot below:
27. Then scroll up and click the blue Save button on the screen. Finally click the Actions button on the left side of the API Gateway console and choose Deploy API to deploy your API. In the Deploy API window, select ZombieWorkshopStage from the dropdown and click Deploy.
28. You are now ready to test out Twilio integration with your API. Send a text message to your Twilio phone number.
LAB 2 COMPLETE
If the integration was successful, you should receive a confirmation response text message and your text message you sent should display in the web app chat room as coming from your Twilio Phone Number. You have successfully integrated Twilio text message functionality with API Gateway.
What you'll do in this lab...
In this lab you'll launch an Elasticsearch Service cluster and setup DynamoDB Streams to automatically index chat messages in Elasticsearch for future ad hoc analysis of messages.
Elasticsearch Service Architecture
1. Select the Amazon Elasticsearch icon from the main console page.
2. Create a new Amazon Elasticsearch domain. Provide it a name such as "[Your CloudFormation stack name]-zombiemessages". Click Next.
3. On the Configure Cluster page, leave the default cluster settings and click Next.
4. For the access policy, select the Allow or deny access to one or more AWS accounts or IAM users option in the dropdown and fill in your account ID. Your AWS Account ID is actually provided to you in the examples section so just copy and paste it into the text box. Make sure Allow is selected for the "Effect" dropdown option. Click OK.
5. Select Next to go to the domain review page.
6. On the Review page, select Confirm and create to create your Elasticsearch cluster.
7. The creation of the Elasticsearch cluster takes approximately 10 minutes.
- Since it takes roughly 10 minutes to launch an Elasticsearch cluster, you can either wait for this launch before proceeding, or you can move on to Lab 4 and come back to finish this lab when the cluster is ready.
8. Take note of the Endpoint once the cluster starts, we'll need that for the Lambda function.
9. Go into the Lambda service page by clicking on Lambda in the Management Console.
10. Select Create a Lambda Function.
11. Skip the Blueprint section by selecting the Skip button in the bottom right.
12. In Configure Triggers section, select the DynamoDB event source type and then select the messages DynamoDB table. It should appear as "[Your CloudFormation stack name]-messages". Then set the Batch size to 5, the Starting position to Lastest and select the checkbox Enable trigger. Then click on Next button.
13. Give your function a name, such as "[Your CloudFormation stack name]-ESsearch". Keep the runtime as Node.js 4.3. You can set a description for the function if you'd like.
14. Paste in the code from the ZombieWorkshopSearchIndexing.js file provided to you. This is found in the Github repo in the "ElasticsearchLambda" folder.
15. On line 6 in the code provided, replace region with the region code you are working in (the region you launched your stack, created your Lambda function etc).
Then on line 7, replace the endpoint variable that has a value of ENDPOINT_HERE with the Elasticsearch endpoint created in step 8. Make sure the endpoint you paste starts with https://.
- This step requires that your cluster is finished creating and in "Active" state before you'll have access to see the endpoint of your cluster.
16. Now you'll add an IAM role to your Lambda function. For the Role, select Create new Role from template(s), give a name to your Role like "[Your CloudFormation stack name]-ZombieLabLambdaDynamoESRole" and select the Role template Elasticsearch permissions.
17. In the "Timeout" field for your Lambda function, change the function timeout to 1 minute. This ensures Lambda can process the batch of messages before Lambda times out. Keep all the other defaults on the page set as is. Select Next and then on the Review page, select Create function to create your Lambda function.
18. In the above step, we configured DynamoDB Streams to capture incoming messages on the table and trigger a Lambda function to push them to our Elasticsearch cluster. Your messages posted in the chat from this point forward will be indexed to Elasticsearch. Post a few messages in the chat, at least 5 as configured in the DynamoDB Streams event source (batch size). You should be able to see that messages are being indexed in the "Indices" section for your cluster in the Elasticsearch Service console.
LAB 3 COMPLETE
If you would like to explore and search over the messages in the Kibana web UI that is provided with your cluster, you will need to navigate to the Elasticsearch domain you created and change the permissions. Currently you've configured the permissions so that only your AWS account has access. This allows your Lambda function to index messages into the cluster.
To use the web UI to build charts and search over the index, you will need to implement an IP based policy to whitelist your computer/laptop/network or for simplicity, choose to allow everyone access. For instructions on how to modify the access policy of an ES cluster, visit this documentation. If you choose to open access to anyone be aware that anyone can see your messages, so please be sure to restrict access back to your AWS account when you're done exploring Kibana, or simply delete your ES cluster.
What you'll do in this lab...
In this lab, you'll integrate a Slack channel with your survivor chat. There may be survivors who use different chat systems and you'll want to communicate with them! After completing this lab, survivors communicating on Slack can send messages to survivors in the Zombie Chat App by configuring a slash command prefix to be used on any messages in their Slack channel that they want to send to the survivors. When Slack users type messages with this Slash command, it will pass the message to your survivor chat API, similiar to the webhook functionality enabled in the Twilio lab!
If you aren't familiar with Slack, they offer a free chat communications service that is popular, especially among the developer community. Slack uses a concept called "Channels" to distinguish different chat rooms. Visit their website to learn more!
Slack Integration Architecture
1. Go to http://www.slack.com and create a username, as well as a team.
2. Once logged into Slack, navigate to https://slack.com/apps and click Build your own near the top of the page. Then on the next screen, select Make a Custom Integration.
3. On the "Custom Integration" page, select Slash Commands to create a Slash Command. Slash commands allow you to define a command that will inform Slack to forward your message to an external source with a webhook. In this case you'll configure your Slash Command to make a POST request to an external URL (the URL for your API Gateway endpoint).
4. On the Slash Commands page, define a command in the Commands text box. Insert /survivors as your Slash Command. Then select "Add Slash Command Integration" to save it.
5. On the Integration Settings page, make sure the Method section has "POST" selected from the dropdown options. Then scroll to the Token section and copy the Token (or generate a new one) to a text file as you'll need it in the following steps.
6. Keep the Slack browser tab open and in another tab navigate to the Lambda service in the AWS Management Console.
7. Click Create a Lambda function. You'll create a Lambda function to parse incoming Slack messages and send them to the Chat Service.
8. Skip past the blueprints page as we will not be using one. Also skip past the triggers page by selecting Next.
9. Give your function a name such as "[Your CloudFormation Stack name]-SlackService". For the Nodejs version, you can keep the default Nodejs 4.3 selected. Now navigate to the GitHub repo for this workshop, or the location where you downloaded the GitHub files to your local machine.
10. Open the SlackService.js file from the GitHub repo, found in the slack folder. Copy the entire contents of this js file into the Lambda inline edit window.
11. Input the Slack Token string that you copied earlier into the function. You should copy the Token string from Slack into the "token" variable on line 15 in the Lambda function, replacing the string INSERT YOUR TOKEN FROM SLACK HERE with your own token.
- Slack provides a unique token associated with your integration. You are copying this token into your Lambda function as a form of validation. When incoming requests from Slack are sent to your API endpoint, and your Lambda function is invoked with the Slack payload, your Lambda function will check to verify that the incoming Token in the request matches the Token you provided in the code. If the token does not match, Lambda returns an error and doesn't process the request.
12. In the "API" variable, you will insert the fully qualified domain name (FQDN) to your Chat Service (/zombie/message) API Gateway resource so that the HTTPS requests can be sent with the messages from Slack. API.endpoint should show a value of "INSERT YOUR API GATEWAY FQDN HERE INCLUDING THE HTTPS://" on line 9. Replace this string with the FQDN of your /message POST method. Your final FQDN inserted into the code should look something like "https://xxxxxxxx.execute-api.us-west-2.amazonaws.com".
You should also fill in the region code in the variable API.region. This should be the region where you launched CloudFormation.
Finally you will also copy in the name of your DynamoDB Users table that was created for you. This should be placed in the table variable. You will also need to copy in the name of your "slackindex" (this is an index that was created on the DynamoDB table to assist with querying). These attributes can be found in the Outputs section in CloudFormation. You should be copying the values for DynamoDBUsersTableName and DynamoDBUsersSlackIndex from CloudFormation.
- Your code is now configured to check if the token sent with the request matches the token for your Slack integration. If so, it queries the DynamoDB Users table to validate the Slack Username and Slack Team Domain associated with the user. If these values match a user in the Users table, then the message is authorized as coming from a registered survivor. It parses the Slack message payload and makes an HTTPS request to your /message endpoint with the message from Slack.
13. After you have copied the code into the Lambda inline code console and modified the variables, scroll down to the Lambda function handler and role section. For the role, select Choose an existing role from the dropdown and then select the role that looks like [Your stack name]-ZombieLabLambdaRole.... For simplicity we are reusing the same Lambda role for our functions.
14. In the Advanced Settings, set the Timeout to 30 seconds. Then click Next.
15. On the review page, make sure that everything looks correct.
16. Click Create function. Your Lambda function will be created.
17. When the function is created, navigate to the API Gateway service in the AWS Management Console. Click into your "Zombie Workshop API Gateway" API. On the left Resources pane, click/highlight the "/zombie" resource so that it is selected. Then select the Actions button and choose "Create Resource". For Resource Name, insert slack and for Resource Path, insert slack. Click "Create Resource" to create your slack API resource. The final resource for your Slack API should be as shown below.
- In this step, you are creating a new API resource that the Slack slash command webhook can forward requests to. In the next steps, you'll create a POST method associated with this resource that triggers your Lambda function. When you type messages in Slack with the correct slash command, Slack will send requests to this resource, which will invoke your SlackService Lambda function to pre-process the payload and make a call to your /zombie/message endpoint to insert the data into DynamoDB.
18. For your newly created "/slack" resource, highlight it, then click Actions and select Create Method to create the POST method for the /zombie/slack resource. In the dropdown, select POST. Click the checkmark to create the POST method. On the Setup page, choose an Integration Type of Lambda Function, and select the region that you are working in for the region dropdown. For the Lambda Function field, type "SlackService" for the name of the Lambda Function. It should autofill your function name. Click Save and then OK to confirm.
19. Click Integration Request for the /slack POST method. We'll create a Mapping Template to convert the incoming query string parameters from Slack into JSON which is the format Lambda requires for parameters. This mapping template is required so that the incoming Slack message can be converted to the right format.
20. Expand the Body Mapping Templates arrow and click Add mapping template. In the Content-Type box, enter application/x-www-form-urlencoded and click the little checkmark to continue. If a popup appears asking if you would like to secure the integration, click Yes, secure this integration. This ensures that only requests with the defined content-types will be allowed.
As you did in the Twilio lab, we're going to copy VTL mapping logic to convert the request to JSON. A new section will appear on the right side of the screen with a dropdown for Generate Template. Click that dropdown and select Method Request Passthrough.
In the text editor, delete all of the exiting VTL code and copy the following into the editor:
{"body": $input.json("$")}
Click the grey Save button to continue. The result should look like the screenshot below:
21. Click the Actions button on the left side of the API Gateway console and select Deploy API to deploy your API. In the Deploy API window, select ZombieWorkshopStage from the dropdown and click Deploy.
22. On the left pane navigation tree, expand the ZombieWorkshopStage tree. Click the POST method for the /zombie/slack resource. You should see an Invoke URL appear for that resource as shown below.
23. Copy the entire Invoke URL. Navigate back to the Slack.com website to the Slash Command setup page and insert the Slack API Gateway Invoke URL you just copied into the "URL" textbox. Make sure to copy the entire url including "HTTPS://". Scroll to the bottom of the Slash Command screen and click Save Integration.
24. You're ready to test out the Slash Command integration. In the team chat channel for your Slack account, type the Slash Command "/survivors" followed by a message. For example, type "/survivors Please help me I am stuck and zombies are trying to get me!". After sending it, you should get a confirmation response message from Slack Bot like the one below:
LAB 4 COMPLETE
Navigate to your zombie survivor chat app and you should see the message from Slack appear. You have configured Slack to send messages to your chat app!
Bonus Step:
You've configured Slack to forward messages to your zombie survivor chat app. But can you get messages sent in the chat app to appear in your Slack chat (i.e.: the reverse)? Give it a try or come back and attempt it later when you've finished the rest of the labs! HINT: You'll want to configure Slack's "Incoming Webhooks" integration feature along with a Lambda code configuration change to make POST requests to the Slack Webhook whenever users send messages in the chat app!
In this section, you'll help protect suvivors from zombies. Zombie motion sensor devices allow communities to determine if zombies (or intruders) are nearby. You'll setup a Lambda function to consume motion sensor events from an IoT device and push the messages into your chat application.
IoT Integration Architecture
If you wish to utilize the Zombie Sensor as a part of the workshop, this guide will walk you through the following:
- Items required to create the physical Zombie sensor (Ignore this step if a zombie sensor is provided as a part of an AWS workshop)
- How to create the AWS backend (Simple Notification Service Topic) for the Zombie Sensor
- How to install the Node.js device code provided in this workshop onto the device
Please note that this section requires an IoT device that can emit messages to SNS. If you are setting this up on your own device outside of the workshop, please proceed through the sections below to do that, otherwise skip the device setup instructions as the device has been setup by AWS for you by the workshop instructor.
Items Required
1. One Intel® Edison and Grove IoT Starter Kit Powered by AWS. This can be purchased here.
2. Within this starter kit you will be using the following components for this exercise:
- Intel® Edison for Arduino
- Base Shield
- USB Cable; 480mm-Black x1
- USB Wall Power Supply x1
- Grove - PIR Motion Sensor: The application code is a very simple app that publishes a message to an Amazon Simple Notification Service (SNS) topic when motion is detected on the Grove PIR Motion Sensor. For the purpose of a workshop, this should be done only once in a central account by the workshop organizer - the SNS topic will be made public so that participants can subscribe to this topic and make use of it during the workshop.
An example output message from the Intel Edison:
{"message":"A Zombie has been detected in London!", "value":"1", "city":"London", "longtitude":"-0.127758", "lattitude":"51.507351"}
A simple workflow of this architecture is:
Intel Edison -> SNS topic -> Your AWS Lambda functions subscribed to the topic.
####Creating the AWS Backend
If you are following this guide during a workshop presented by AWS, please ignore the steps below, 1-3. An SNS topic should already be configured for the workshop participants to consume messages from. That SNS topic ARN will be provided to you.
1. Create the SNS Topic. Navigate to the SNS product page within the AWS Management Console and click Topics in the left hand menu. Then click on 'Create New Topic'. You will be presented with the following window. Fill in the fields with your desired values and click create topic.
2. You will now need to edit the topic policy to permit any AWS account to subscribe lambda functions to your SNS topic. Select the check box next to your new topic, and then click Actions -> Edit topic policy. You need to configure these settings presented as shown the below screenshot. Then click Update Policy. This part is what allows others (perhaps teammates working on this lab with you, to consume notifications from your SNS topic.
3. You now have your central SNS topic configured and ready to use. Ensure that you make a note of the Topic ARN and region where you have created the topic, you will need it in some of the following steps.
####Installing the application on the Intel Edison If you are following this guide during a workshop presented by AWS, please ignore this section. An Intel Edison board should already be configured for the workshop particants to consume messages from.
1. First, you will need to get your Edison board set up. You can find a getting started guide for this on the Intel site here. Note that for the purpose of this tutorial, we will be writing our client code for the Edison in Node.js and will therefore be using the Intel® XDK for IoT (referred to as 'XDK' from here on, and which you will need to install) as our IDE.
2. You will need to physically connect the Grove PIR Motion Sensor to pin D6 on the breakout board.
3. Download all of the code from the 'zombieIntelEdisonCode' folder in the GitHub repository and store it in a folder locally on your machine. This simply consists of a main.js file (our application) and our package.json (our app dependencies).
4. Navigate to the homepage in the XDK and start a new project.
5. Choose to import an existing Node.js project and select the folder where you stored the code from this repository in the previous step.
6. Give your project a name. We called ours zombieSensor.
7. You now need to edit the code in main.js to include your AWS credentials and the SNS topic that you have created. Firstly, we'll need some AWS credentials.
8. You will need to create an IAM User with Access and Secret Access Keys for your Edison to publish messages to your SNS topic. There is a guide on how to create IAM Users here. Your IAM policy for the user should look like the following:
{
"Version": "2012-10-17",
"Statement": [{
"Action": [ "sns:Publish" ],
"Effect": "Allow",
"Resource": "ENTER YOUR SNS TOPIC ARN HERE"
}]
}
9. Now let's add your credentials to the client side code. Edit the following line in main.js to include your user access keys and the region where you have set up your SNS topic.
AWS.config.update({accessKeyId: 'ENTER ACCESSKEY HERE', secretAccessKey: 'ENTER SECRET ACCESS KEY HERE', region: 'ENTER REGION HERE'});
10. Edit the following line in main.js to reflect the region in which you created the SNS topic.
var sns = new AWS.SNS({region: 'ENTER REGION HERE'});
11. Edit the following line in main.js to reflect the Amazon Resource Name (ARN) of the SNS topic that you created earlier.
TopicArn: "ENTER YOUR SNS TOPIC ARN HERE"
12. You now need to connect the XDK to your Intel Edison device. There is a guide on the Intel site on how to do this here under the 'Connect to your Intel® IoT Platform' section.
13. You now need to build the app and push it to your device. First, hit the build/install icon, this looks like a hammer in the XDK. It may take a couple of minutes to install the required packages etc.
14. Once the app has been built succesfully, you can run the app by pressing the run icon, this looks like a circuit board with a green 'play' sign.
15. Your app should now be running on the Edison device and your messages being published to the SNS topic. You can consume these messages using AWS Lambda. There is some documentation to get you started here. Continue below to learn how to integrate the SNS notifications into the chat application.
####Consuming the SNS Topic Messages with AWS Lambda
Using the things learned in this workshop, can you develop a Lambda function that alerts survivors in the chat application when zombies are detected from the zombie sensor? In this section you will configure a Lambda function that triggers when messages are sent from the Edison device to the zombie sensor SNS topic. This function will push the messages to the chat application to notify survivors of zombies!
1. Open up the Lambda console and click Create a Lambda function.
2. On the blueprints screen, click Skip as we won't use one.
3. On the next page (Configure Triggers), click the empty field next to the AWS Lambda logo and select SNS as an event source.
-
For the SNS topic selection, either select the SNS topic from the dropdown you created earlier (if you're working on this outside of an AWS workshop) or if you are working in an AWS workshop, insert the shared SNS topic ARN provided to you by the organizer. Make sure the trigger checkbox option is set to enabled so that your Lambda function will immediately begin processing messages. Click Next.
-
The SNS Topic ARN provided by AWS (if in a workshop) is not in your AWS account and will not display in your dropdown of choices. It is an ARN provided by AWS in a separate account and needs to be typed in.
4. On the "Configure Function" screen, name your function "[Your CloudFormation Stack Name]-sensor". Now open the exampleSNSFunction.js file from the workshop GitHub repository. It is located here. Copy the entire contents of this JS file into the empty Lambda code editor.
When you've copied the code into the Lambda browser editor, locate the variable API. Replace the variable API.endpoint with your /zombie/message/post endpoint. It should look like https://xxxxxxxx.execute-api.us-west-2.amazonaws.com. This is the "Invoke URL" which you can grab from the Stages page in the API Gateway console. Remember, don't insert anything after the ".com" portion, the function fills in the rest of the resource path for you. You also should insert the region for your API in the API.region variable.
5. For the Role, leave the option as Choose an existing role. Then in the "Existing Role" dropdown, select the ZombieLabLambdaRole that was created for you by CloudFormation. It should look like "[Your CloudFormation stack name]-ZombieLabLambdaRole".
6. Set the Timeout to 30 seconds. Leave all other options as default on the Lambda creation page and click Next.
7. On the Review page, click Create function.
8. That's it! When your function is created, head on over to your survivor chat application. If your session has expired you may need to login again.
-
Almost immediately you should begin seeing zombie sensor messages showing up in the chat application which means your messages are successfully sending from the Intel Edison device to the Zombie Sensor SNS Topic. Any survivors with Lambda functions subscribed to this topic will get notifications in their team's survivor chat service.
-
This Lambda Function takes the zombie sensor message from SNS, parses it, and makes an AWS SigV4 signed HTTPS POST request to your API Gateway message endpoint. That endpoint inserts the record into DynamoDB as a message making it available to the application on subsequent poll requests.
1. To cleanup your environment, it is recommended to first delete these manual resources you created in the labs before deleting your CloudFormation stack, as there may be resource dependencies that stop the Stack from deleting. Follow steps 2-6 before deleting your Stack.
2. Be sure to delete the TwilioProcessing Lambda Function. Also if you no longer plan to use Twilio, please delete your Twilio free trial account and/or phone numbers that you provisioned.
3. Be sure to delete the Elasticsearch cluster and the associated Lambda function that you created for the Elasticsearch lab.
4. Be sure to delete the Lambda function created as a part of the Slack lab and the Slack API resource you created. Also delete Slack if you no longer want an account with them.
5. Be sure to delete the SNS topic (if you created one) and the Lambda function that you created in the Zombie Sensor lab.
6. Delete the Cognito User Pool and Identity Pool associated with your application, that you created during lab setup.
-
User Pool: Click into your User Pool and click the "Delete pool" button to delete your user pool.
-
Identity Pool: Click into the Federated Identities page of Cognito and find your identity pool ([stackname]-identitypool). Then click Edit identity pool. Scroll to the bottom and delete the identity pool.
7. Navigate to CloudWatch Logs and make sure to delete unnecessary Log Groups if they exist.
8. Once those resources have been deleted, go to the CloudFormation console and find the Stack that you launched in the beginning of the workshop, select it, and click Delete Stack.
- When the stack has been successfully deleted, it should no longer display in the list of Active stacks. If you run into any issues deleting stacks, please notify a workshop instructor or contact AWS Support for additional assistance.
- Channel Challenge: Currently all messages sent in the survivor app are saved in the database with a channel of 'default' - all survivors can see these messages. Your challenge is to modify the application so that users have the option to scope their messages to only display to survivors in the same "Camp" (Camp is an attribute that is collected from users when they sign up for a user account). You will need to modify the JS application as well as the backend messages database and Lambda functions to work with this "Camp" attribute instead of the existing 'channel' attribute.