Skip to content

Systemd configuration for a network namespace containing a WireGuard VPN connection

License

Notifications You must be signed in to change notification settings

chrisbouchard/namespaced-wireguard-vpn

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

40 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Namespaced WireGuard VPN

Copr build status

Systemd configuration for a network namespace containing a WireGuard VPN connection

Overview

        I N T E R N E T
              Λ :
              | :
              | :
+------------ | : ------------+    +-----------------------------------------------+
| Init NS     | :             |    | VPN NS                                        |
|          -- V --            |    |      --------                                 |
|        / enp0s3  \ .................. / wg-vpn   \ .............                 |
|        \ 1.2.3.4 <--------------------> 10.0.0.1 /             :                 |
|          -------            |    |      --------       O------ : ------------O   |
|                             |    |                     | transmission-daemon |   |
|         ----------          |    |     ----------      O------------ : ------O   |
|       / veth─init  <-----------------> veth─vpn   \                  :           |
|       \ 10.127.0.1 / ............... \ 10.127.0.2 / .................:           |
|         ----------          |    |     ----------                                |
|              :              |    |                                               |
|   O--------- : ---------O   |    +-----------------------------------------------+
|   | transmission-remote |   |
|   O---------------------O   |
|                             |
+-----------------------------+

Rough illustration of the intended setup. See Routing & Network Namespace Integration for a more thorough explanation of how WireGuard works across network namespaces.

Installation

This package is available from the chrisbouchard/upliftinglemma COPR. Assuming you're using a recent version of Fedora or CentOS, you can install using dnf.

$ dnf copr enable chrisbouchard/upliftinglemma
$ dnf install namespaced-wireguard-vpn

You may have to agree to some prompts if this is the first COPR you've enabled.

Configuration

The systemd unit configuration file for this project is /etc/namespaced-wireguard-vpn/namespaced-wireguard-vpn.conf which, by default, is owned by root with 0600 permissions since it will contain your VPN WireGuard private key. The file will be read as a systemd environment file (see the EnvironmentFile= directive in systemd.exec(5)). All expected values are set by default, most with dummy default values.

Configuration Values

  • NETNS_NAME: Name to assign to the created network namespace. Network namespace names are system global, so it's important that this name be unique.
  • WIREGUARD_NAME: Name to assign to the created WireGuard network interface. The interface is created in the default (init) namespace then moved to the VPN namespace, so the interface name must be unique in both.
  • WIREGUARD_PRIVATE_KEY: Private key assigned by the VPN provider for your WireGuard connection. This is sensitive, so by default the configuration directory and file are only readable by root.
  • WIREGUARD_ENDPOINT: The endpoint of the VPN provider's WireGuard server.
  • WIREGUARD_VPN_PUBLIC_KEY: The public key of the VPN provider's WireGuard peer.
  • WIREGUARD_ALLOWED_IPS: Comma-separated list of IP addresses that may be contacted using the WireGuard interface. For a namespaced VPN, where the goal is to force all traffic through the VPN, the catch-all value 0.0.0.0/0,::0/0 is probably correct.
  • WIREGUARD_INITIAL_MTU: MTU of the wireguard interface. Choosing too large a value risks packet loss.
  • WIREGUARD_IP_ADDRESSES: Comma-separated list of static IP addresses to assign to the WireGuard interface. As far as I know, WireGuard does not currently support DHCP or any other form of dynamic IP address assignment.
  • TUNNEL_ENABLE: Whether to create the tunnel (veth) network interface between the default (init) and VPN network namespaces. Set to zero to disable or nonzero to enable.
  • TUNNEL_INIT_NAME: Name to assign to the created tunnel (veth) network interface in the default (init) network namespace.
  • TUNNEL_INIT_IP_ADDRESSES: Comma-separated list of static IP addresses to assign to the tunnel interface in the default (init) network namespace.
  • TUNNEL_VPN_NAME: Name to assign to the created tunnel (veth) network interface in the VPN network namespace.
  • TUNNEL_VPN_IP_ADDRESSES: Comma-separated list of static IP addresses to assign to the tunnel interface in the VPN network namespace.

Tunnel

This package provides a tunnel between the init namesapce and the created VPN namespace so, e.g., you can control services inside the VPN namespace from outside. If you don't need or want the tunnel, just set TUNNEL_ENABLE=0.

Namespace Overlay

Most likely, there will be some additional configuration that you will want to make, particularly if your system uses systemd-resolved for domain name resolution. Since systemd-resolved uses a UNIX socket, it won't be namespaced and requests over the VPN will use the configured DNS name servers — name resolution will either break (if configured to use local servers) or worse leak information.

Linux network namespaces allow you to add configuration files in /etc/netns/$NETNS_NAME, which will replace the existing configuration file for processes running inside the namespace. I'd recommend overriding nsswitch.conf and resolv.conf to use your VPN provider's name servers. See DNS Leaks with Network Namespaces for more detail.

Running

Once the configuration is done, you can start the VPN with

$ systemctl start namespaced-wireguard-vpn.target

If you would like it to always start on boot, you can enable it with

$ systemctl enable namespaced-wireguard-vpn.target

At this point, if there are no errors, you should have a new network namespace (by default named vpn). You can test it out by running some commands in the default (init) namespace and VPN namespace and comparing the output.

$ curl ifconfig.me/ip
$ ip netns exec $NETNS_NAME curl ifconfig.me/ip

You may want to confirm that DNS requests are going to your VPN's name servers.

$ nslookup example.com
$ ip netns exec $NETNS_NAME nslookup example.com

Configuring Other Units to Run in the Namespace

While ip netns exec is handy for one-off commands, this project is most useful to allow running other systemd units in a VPN-only namespace. This is accomplished by adding a drop-in override file to the unit. In the following example, we'll configure Transmission Daemon to run in our namespace.

/etc/systemd/system/transmission-daemon.service.d/10-vpn-netns.conf:

[Unit]
BindsTo=namespaced-wireguard-vpn-netns.service
After=namespaced-wireguard-vpn-netns.service
JoinsNamespaceOf=namespaced-wireguard-vpn-netns.service

[Service]
PrivateNetwork=yes

Future Work/TODO

  • Consider using sd_notify for service scripts to provide a status.
  • Once systemd 247 is widely available (probably when Fedora 34 is released), switch to using LoadCredentials= for the WireGuard private key.

Contributing

The configuration is geared for a Mullvad configuration, since that's the VPN I use, but I think it should be general enough to work with any simple WireGuard VPN setup that wg-quick could handle. If you need something more complicated, feel free to fork and open a merge request.